Xerox 50 LP, 50 ST User Manual

HE DOCUMENT COMPANY

XEROX

Xerox Document Centre ColorSeries 50 LP/ST Novell NetWare® Quick Install

Before You Start:

• For all NetWare environments, record the following information, making sure to capture case-sensitive information:

Frame T y pe

Print Server Name

b) c)

assigned (optional)

NDS Tree

NDS only).

• When using Novell NetWare version 3.x, you must have a Queue and Print Server created for the server , an d know the Fram e Type being us ed.

• When using Novell NetWare 4.x or 5.x for a

Bindery

and Print Server as Bindery objects, and know the context in which they are created. For a

Bindery

File Server Name.

• When using Novell NetWare 4.x or 5.x for an

NDS

installation, you must create the Printer, Print Server and Queue, and know the Context and Tree Name in which they are created.

• Decide now if you will use CentreWare Internet Services or CentreWare Printer Admin Services to customize printer connectivity settings.

Print Server Password

NDS Context Name

and

installation, you must create the Queue

installation, you must also record the

(for

Step 1 Set Up the Printer

1. Run NWADMIN, NWADMIN32 or PCONSOLE

to set up a printer and queue objects. Refer to the Novell documentation, if needed.

2. Press the

the printer Control Panel.

3. Press

4. Using the keypad, enter your

and then press The default Access Number is 11111. It may have been changed by a Sys tem Administrator.

5. Press

The list of available Items and their current settings are displaye d.

6. Press

scroll buttons to locate the

7. Press

Administration

Tools

on the Touch Screen.

Enter

on the Touch Screen.

Machine Setup

IP Address

Change Settings

in the Items list, or use the

button, located on

Access Numb er

on the Touch Screen.

IP Address

on the Touch Screen.

field.

8. After entering the IP Add ress us ing the key pad,

Save

press

9. Press

use the scroll buttons to locate the

Type

Frame T y pe

, located in the Items list, or

Frame

10.Press

Change Settings

on the Touch Screen.

11. After pressing the desired button for

Type

, press

Save

12.If you are using Token Ring, also set the

Source Routing

13.Press

Administration screens.

value.

repeatedly until you exit the

14.Power off and power on the printer. Allow at

least 30 seconds between powering off and powering on the printer . A C onfiguration Rep ort will print in approximately 5 minutes. The information on the Conf iguration Report can be very helpful in completing the network installation and troubleshooting problems with your printer.

15.Continue with

Connectivity Settings

Step 2 Customize Printer

Frame

For assistance, contact your local Xerox Customer Support Center: USA: 1-800-821-2797 Canada: 1-800-939-3769 Bustled Controller, Part Numbers 97N00893 and 97N00894 are for use with Xerox Corp. Digital Color Product Model YFA-1.

HE DOCUMENT COMPANY

XEROX

Xerox Document Centre ColorSeries 50 LP/ST Novell NetWare® Quick Install

Step 2 Customize Printer Connectivity Settings

If you use CentreWare Printer Admin Services:

1. Install the Printer Admin Services software.

2. Start the Printer Admin Services program.

From a Windows workstation click

Programs > Xerox CentreWare Color > Printer Admin Services

Start >

3. From the main Printer Admin Services window,

NetWare

click want to install from the list of printers.

4. Click

5. Click on the

and select the printer that you

and then click

Network

Settings

tab.

6. Review the displayed settings and make any

changes, if necessary .

7. Click on the

edit the

Password, Poll Interval

settings, as needed.

For a Bindery installation, you must also enter a name in the Enter information in other fields as desired.

For a NDS ins tallation, you must enter information in the fields.

NetWare

Print Server Name, Print Server

tab and then review and

SAP Interval

and

File Server 1

Tree Name

and

field.

Context

8. If you are using IP, continue with Step 9. If you

are not using IP, skip to Step 11.

9. Click on the

TCP/IP

tab.

2. In the browser, enter the IP Address for the

printer and press the Services Home Page is displayed.

3. Click on the

Properties

Enter

key. The Internet

button.

10. Review and edit any fields, if necessary. If you

enable DHCP, be sure to save the new Configuration Report that will print approximately 5 minutes after you power off and power on the printer, since the IP Address may have changed. You will need the new address the next time you access the settings.

11. When you have finished entering the Settings

data, click

Apply, OK

and then

Exit

4. Click

Connectivity, Protocols

to view NetWare information.

5. Review and edit the NetWare settings.

6. Click

Apply New Settings

made. Provide a when prompted. The default User Name is

Admin

with a capital “A” and the default

password is

User Name

11111

if any changes were

, and

and

NetWare

Password

12. Power off and power on the printer. Allow at

least 30 seconds between powering off and powering on the prin ter . A C onfigurat ion Report will print in approximately 5 minutes. The information on the Configuration Report can be very helpfu l in complet ing the netwo rk installation and troubleshooting problems with your printer.

13. Continue with

Step 3 Print a Test Page

Step 2 Customize Printer Connectivity Settings

If you use CentreWare Internet Services:

1. At your workstation, open the Internet Explorer

or NetScape navigator browser.

7. Power off and power on the printer. Allow a full

30 seconds between powering off and powering on the printer.

8. Continue with

Step 3 Print a Test Page

1. Install the network printer driver for your work-

station environment, and print a test page. Details on installing printer drivers, printing a test page, and other printing options are provided in the

ColorSeries 50 LP/ST Printer User Guide

Xerox Document Centre

2. Details on installing the printer with NetWare is

Xerox Document Centre ColorSeries 50

in the

LP/ST Printer Installation Guide