X10 SC23A INSTALL GUIDE

NightWa tc h 2 Indoor/Outdoor B lack &Whit e Camera
Extremely small size.
(with microphone)
Plugs into RCA type inputs on any TV or monitor.
Can be turned on and of f fr om X10 controllers.
Model SC23A
Remote controlled power supply (included).
Ver y sensitive so it can be used in low light conditions.
Use it outdoors to monitor your front door, back yard, etc. (60 ft. cable included).
The SC23A includes a very small and compact B/W video camera (WC12A) that plugs into the RCA audio/video jacks on any TV or monitor . Y ou can place it anywhere you want to monitor (indoors or outdoors). It also includes a microphone so you can hear as well as see what’ s going on. It is powered from a remote controlled power supply (XM17A) so you can turn it on and off by remote control using X10 controllers and remotes (sold separately).
1. Attach the camera to a wall in the location you want to monitor. Mount it with the cable coming out of the bottom. If you are installing the camera outdoors, pass the 60 ft. cable from the camera through a small hole in your exterior wall.
Video/Audio
monitor of
your choice
Video Audio In In
2. Plug the camera’ s plug into the adapter cable.
3. Plug the video plug on the adapter cable into the yellow V ideo In socket on your TV/monitor .
5. Plug the power supply’ s jack into the power socket on the adapter cable.
Plug video adapter in here.
Plug audio in here.
6. Plug the power supply into any 120V AC outlet.
Adapter Cable.
X10 Wireless Technology, Inc. LIMITED 1-YEAR WARRANTY
X10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. X10 agrees to repair or replace, at it’s sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase.
If service is required under this warranty: Call 1-800-442-5065, visit www.x10.com, or e-mail sales@x10.com.
X10.com, a division of X10 Wireless Technology, Inc. Visit www .x10.com/support for more help.
Plug camera in here.
WC12A
60 ft.
Set the Housecode dial to match the setting on the X10 Controller or Remote Control that you want to control the camera connected to the XM17A from.
Set the Unit Code dial to any unused number between 1 and 16.
Plug power supply in here.
Plug into any AC outlet
SC23A-9/02
Loading...