X10 PM10E DATASHEET

Product number : PM10E

Powermid XL

Remote Control Extender

Key Features

• Extra long RF range of 60 meters

approximately.

• Controlling your digital satellite receiver,

VCR, Stereo, CD player or DVD remotely.

• Works with almost any remote control

unit (including fast format codes) and

TV / Video / Hi-Fi combination.

Benefits

Many homes today have been pre-wired with coaxial

cables to distribute the Audio/Video signal. But you

still need to send the IR control codes.

The POWERMID™ infrared remote control extender allows

you to use existing remote control units to operate TV,

VCR, Stereo, CD player, DVD or satellite systems from

anywhere in the home. No installation is required as the

units simply plug into any AC outlet. POWERMID™ works

with any infrared controller including fast format code.

The complete POWERMID™ system consists of a

transmitter unit and a receiver unit .

The POWERMID™ transmitter and receiver are each

equiped with a captive lead and plug for connection to a

mains outlet. The receiver should ideally be positioned

so that the face of the unit with the logo on is facing the

infrared detector in the TV/VCR, etc., to be operated. In

many cases, however, satisfactory operation will be

obtained by placing the unit on top of the TV.

Technical data

POWERMID TRANSMITTER (ST10E):

• AC supply: 230 VAC ±10% / 50 Hz

• RF Output:433.92 MHz ±100kHz

• 1mW typical @ 3 m

• Approvals:ETS 300 220 - CE Mark

• Operating Temperature: 0 to 40° C

• Storage Temperature: -20 to +70° C

POWERMID RECEIVER (RE10E):

• AC supply:230 VAC ±10% / 50 Hz

• RF Input: 433.92 MHz

• Operating Range:60 m approximately
(open field)

• Approvals:CE Mark

• Operating Temperature: 0 to 40° C

• Storage Temperature: -20 to +70° C

The POWERMID™ transmitter receives infrared pulses from

remote control units and re-transmits them as RF pulses

at 433.92 Mhz. These transmissions are detected by the

POWERMID™ receiver which converts them back into

infrared signals and sends them to the audio and video

equipment. No attempt is made to decode or convert

infrared signals from their original format. This allows

Powermid to work with almost any remote control unit

and TV/video/Hi-Fi combination.

Simply plug-in and it works !