X10 MR26A INSTALLATION INSTRUCTION
RF Serial FireCracker Receiver , Model MR26A
INSTALLATION INSTRUCTIONS
The MR26A RF serial Interface connects to a serial port on your
PC. It receives wireless Radio Frequency (RF) commands from
X10 remote controls and motion sensors and passes the
commands to your PC. These commands are then interpreted by
Boom, X Ray V ision, MultiView, WebV iew or other software
applications from X10.
1. Shut down your PC and plug the MR26A into any unused
serial port.
F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE
UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
2. If you are using an X10 FireCracker Interface, plug the
FireCracker into your serial port, and then plug the MR26A
into the FireCracker. Restart your PC.
3. Download the desired software application from:
www.x10.com/software
4. Refer to the installation instructions and/or the help file for the
software application you are using the MR26A with.
For more information, please visit:
www.x10.com/support
X10 Wireless Technology, Inc. LIMITED 1-YEAR WARRANTY
X10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free
from defective material and workmanship for a period of one (1) year from the original date of
purchase at retail. X10 agrees to repair or replace, at it’s sole discretion, a defective X10 product
if returned to X10 within the warranty period and with proof of purchase.
If service is required under this warranty:
1. Call 1-800-675-3044 or visit www.x10.com, or e-mail sales@x10.com to obtain a Return
Merchandise Authorization (RMA) number.
2. Return the defective unit postage prepaid to X10 (see address on back).
3. Enclose a check for $4.00 to cover postage and handling.
4. Enclose a dated proof of purchase.
5. X10 is not responsible for shipping damage. Units to be returned should be packed
carefully.
Please visit www.x10.com/warranty
to complete your on-line warranty registration. Thank you.
MR26A-9/01
Loading...