Wyse Technology V90L-LE User Manual

Installation Guide

Wyse® V90L/LE Thin Client
1-GB or 2-GB Flash Upgrade Option Kit

Issue: 061908
PN: 883884-08L Rev. A

ii

Copyright Notice

© 2008, Wyse Technology Inc. All rights reserved.
This manual and the software and firmware described in it are copyrighted. You may not reproduce, transmit,

transcribe, store in a retrieval system, or translate into any language or computer language, in any form or by any
means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of this publication
without express written permission.

End User License Agreement (“License”)

A copy of the Wyse Technology End User License Agreement is included in the software and provided for your
reference only. The License at http://www.wyse.com/license
agreement. By copying, using, or installing the software or the product, you agree to be bound by those terms.

Trademarks

Wyse and Winterm are registered trademarks, and the Wyse logo and Winterm logo are trademarks of Wyse
Technology Inc. ICA and MetaFrame are registered trademarks of Citrix Systems Inc. Microsoft and Windows are
registered trademarks of Microsoft Corporation. All other products are trademarks and/or registered trademarks of
their respective companies. Specifications subject to change without notice.

Patents

This product and/or associated software are protected by copyright, international treaties, and various patents,
including the following U.S. patents: 6,836,885 and 5,918,039.

as of the purchase date is the controlling licensing

Restricted Rights Legend

You acknowledge that the Software is of U.S. origin. You agree to comply with all applicable international and
national laws that apply to the Software, including the U.S. Export Administration Regulations, as well as end-user,
end-use and country destination restrictions issued by U.S. and other governments. For additional information on
exporting the Software, see http://www.microsoft.com/exporting

Ordering Information

For availability, pricing, and ordering information in the United States and Canada, call 1-800-GET-WYSE
(1-800-438-9973) or visit us at http://www.wyse.com

FCC Statement

This equipment has been tested and found to comply with the limits for either Class A or Class B digital devices
(refer to "Regulatory Compliance for Thin Clients"), pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution

Changes or modifications not covered in this manual must be approved in writing by the
manufacturer’s Regulatory Engineering department. Changes or modifications made without
written approval may void the user’s authority to operate the equipment.

.

. In all other countries, contact your sales representative.

Regulatory Compliance for Thin Clients

EMC and Safety Requirements

Model VX0 thin clients are compliant with the regulatory requirements in the regions listed below.
U.S.A. - FCC Part 15 (class B), UL60950

Canada - ICES-003, CAN/CSA-C22 No. 60950
Europe - EN 55022 (class B), EN 61000-3-2 (class A), EN 61000-3-3, EN 55024, EN 90650-1:2000+ALL
Australia / New Zealand - AS/NZS CISPR 22
Japan - VCCI CISPR 22 (class B)
China - CCC GB9254-1998, GB17625.1-2003, GB 4943-2001
Korea - MIC

RF & EMC Requirements

Model VX0 thin clients with internal wireless option are compliant with the regulatory standards in the regions listed
below.

U.S.A. - FCC Part 15 C, 15.401-15.407, FCC 1.1310 (RF exposure)
Canada - RSS-210
Europe - EN 55022 (class B), EN300.328, EN301.489-1, EN301.489-17
Australia / New Zealand - AS/NZS 4771
Japan - Telec (Equipment Radio Regulation, 2006)
China - SRRC (CMII)
Korea - MIC (RRL)

iii

Canadian DOC Notices

Class A - This digital apparatus does not exceed the Class A limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.

Class B - This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.

Wireless Usage and Requirements

Radio transmitting type devices (RF module) are present in the Model VX0 as an option. These devices operate in
the 2.4 GHz band (i.e. 802.11b/g WLAN & Bluetooth).

As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a
wireless device near the body (this does not include extremities) is typical. This device should be used more than
20 cm (8 inches) from the body when wireless devices are on and transmitting.Some circumstances require
restrictions on wireless devices. Examples of common restrictions include:

• When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable

authority for authorization prior to use or turning on the wireless device.

• Every country has different restrictions on the use of wireless devices. Since your system is equipped with a

wireless device, when traveling between countries with your system, check with the local Radio Approval
authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination
country.

• Wireless devices are not user-serviceable. Do not modify them in any way. Modification to a wireless device

will void the authorization to use it. Please contact the manufacturer for service.

Cable Notice

The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or
host devices. Failure to do so may cause interference and violate FCC and international regulations for
electromagnetic interference.

iv

Device Power Supply

For use with external power supply included in the shipping carton, or a certified equivalent model supplied by the
manufacturer.

Model VX0, Product V90L/LE Thin Clients

For use with External Power Supply Model LSE9802A1255 or certified equivalent model supplied by the
manufacturer, output rated for minimum 12Vdc, 4.0A.

Caution

Replace power supply with the same or equivalent type as recommended by the manufacturer.

Battery Information

Model VX0 thin clients contain a replaceable battery.

Warning

There is a risk of explosion if the battery is replaced by an incorrect type. Always dispose of used
batteries according to the instructions accompanying the battery.