Wyse Technology R90L, R90L7, R90LW, R50L, R10L User Manual
Installation Guide
Wyse® R Class Conversion to Xenith Pro
Wyse® USB Firmware ToolTM Release 1.18
Products: R10L, R50L, R90L, R90LW, R90L7
Issue: 031213
PN: 883887-30L Rev. B
Copyright Notices
© 2013, Wyse Technology Inc. All rights reserved.
This manual and the software and firmware described in it are copyrighted. You may not reproduce, transmit,
transcribe, store in a retrieval system, or translate into any language or computer language, in any form or by any
means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of this publication
without express written permission.
End User License Agreement (“License”)
A copy of the Wyse Technology End User License Agreement is included in the software and provided for your
reference only. The License at http://www.wyse.com/license as of the purchase date is the controlling licensing
agreement. By copying, using, or installing the software or the product, you agree to be bound by those terms.
Trademarks
The Wyse and PocketCloud logos and Wyse and PocketCloud are trademarks of Wyse Technology Inc. Other
product names mentioned herein are for identification purposes only and may be trademarks and/or registered
trademarks of their respective companies. Specifications subject to change without notice.
Restricted Rights Legend
You acknowledge that the Software is of U.S. origin. You agree to comply with all applicable international and
national laws that apply to the Software, including the U.S. Export Administration Regulations, as well as end-user,
end-use and country destination restrictions issued by U.S. and other governments. For additional information on
exporting the Software, see http://www.microsoft.com/exporting.
Ordering Information
For availability, pricing, and ordering information in the United States and Canada, call 1-800-GET-WYSE
(1-800-438-9973) or visit us at wyse.com. In all other countries, contact your sales representative.
Contents
1 Introduction 1
Kit Contents 1
Wyse Technical Support 2
Related Documentation and Services 2
Wyse Online Community 2
2 Installing Xenith Pro Firmware 3
Requirements 3
Procedures 4
Troubleshooting 9
USB Keys - Troubleshooting Boot Issues 9
SanDisk Cruiser Flash Drives - Troubleshooting Partition Issues 9
iv Contents
This page intentionally blank.
1 Introduction
This guide provides the instructions you need to use Wyse® USB Firmware Tool to
convert the following Wyse R class thin clients to Xenith Pro:
• R10L
• R50L
• R90L
• R90LW
• R90L7
TIP: After converting your thin clients, obtain any available firmware update at
http://www.wyse.com/serviceandsupport/support/downloads.asp.
Kit Contents
The conversion kit includes:
• Conversion Software Assembly DVD-ROM
• Wyse Conversion Labels (you must attach a Wyse label to each converted thin client)
Figure 1 Kit contents
The Conversion Software Assembly DVD-ROM contains:
• A PDF of this Installation Guide
• Wyse USB Firmware Tool Release 1.18
• RX0 Xenith Pro Conversion Image folder containing the following files:
bios.img
cmos.img
commandsXml.xml
par1.img
Loading...