W & W Manufacturing Co.
800 South Broadway
Hicksville, NY 11801
In USA & Canada: 800-221-0732
In N.Y. State: 516-942-0011
Fax: 516-942-1944
E-Mail: email@ww-manufacturing.com Website: http://www.ww-manufacturing.com
All specifications are subject to change without notice.
Copyright Version 210.19.07.Rev.2
R
ANALYZER X3 & X6
User’s Manual
1 Ready 2 ready 3 ready
1 Ready |
2 Ready |
3Ready |
4 Ready |
5 testing |
6 Chrg |
3 MINUTE BATTERY !
ANALYZER
MADE IN
USA BY: W & W Manufacturing Co.
Notes
Table of Contents |
|
Safety and Precautions……………………………………………3 |
|
Features……………………………………………………………..4 |
|
Specifications……………………………………………...............5 |
|
Part Overview…………………………………………………….…6 |
|
Understanding the X3’s adapters Cup………………….……….7 |
|
Getting started …………………………………………....………8 |
|
Quick Test Analysis………………………………………..……......9 |
|
Cycle Mode…………………………………….…......................10 |
|
Auto Mode.................………………………………….…………11 |
|
Condition Mode……………………………………….....….. .....12 |
|
Discharge Mode………………………………. .........................13 |
|
Charge Mode......................................................................... |
14 |
Impedance Mode.................................................................. |
15 |
Learn Mode………………………………………..……. ............16 |
|
Universal cup operation........................................................... |
17 |
2
Notes
Safety and Operating Environment
Always use a grounded AC outlet to power the Analyzer X3 & X6.
Keep the Analyzer X3 & X6 at least one-foot away from any object to allow for proper ventilation.
Do not Analyze Batteries outside the recommended temperature ranges. For good and consistent results, 25°C (Room temperature) is recommended. Allow batteries to stabilize to room temperature before analyzing.
Do not exceed the battery manufacturer’s recommended voltage, charge current and discharge current.
3
Loading...