WTE
POWER SEM ICOND UCTOR S
KBJ15A – KBJ15M
Features
!
Diffused Junction
!
Low Forward Voltage Drop A
!
High Current Capability G
!
High Reliability
!
High Surge Current Capability
!
Ideal for Printed Circuit Boards
C + ~ ~ -
H
J E
Mechanical Data
!
Case: Molded Plastic
!
Terminals: Plated Leads Solderable per M
P R
MIL-STD-202, Method 208 N
!
Polarity: As Marked on Body
!
Weight: 4.0 grams (approx.)
!
Mounting Position: Any S
!
Marking: Type Number G
L
B
K D
R
T
15A BRIDGE RECTIFIER
KBJ-6
Dim Min Max
A
29.7 30.3
B
19.7 20.3
C
D
E
G
H
J
K
L
M
N
P
R
S
T
All Dimensions in mm
4.7 4.9
17.0 18.0
3.8 4.2
3.1Ø 3.4Ø
2.3 2.7
0.9 1.1
2.0 2.4
0.6 0.7
4.4 4.8
3.4 —
9.8 10.2
7.3 7.7
10.8 11.2
2.6 —
Maximum Ratings and Electrical Characteristics
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage V
Average Rectified Output Current @TC = 100°C I
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
I2t Rating for Fusing (t < 8.35ms) I2t110A
Forward Voltage (per diode) @IF = 7.5A V
Peak Reverse Current @TA = 25°C
At Rated DC Blocking Voltage @T
Typical Thermal Resistance (per leg) (Note 1) R
Typical Thermal Resistance (per leg) (Note 2) R
Operating and Storage Temperature Range T
= 100°C
C
RRM
V
RWM
V
V
R(RMS)
O
FSM
I
FM
R
I
j, TSTG
KBJ
15A
50 100 200 400 600 800 1000 V
R
35 70 140 280 420 560 700 V
JA
JC
@TA=25°C unless otherwise specified
KBJ
15B
KBJ
15D
KBJ
15G
200 A
1.1 V
5.0
500
1.5 K/W
-55 to +150 °C
KBJ
15J
15 A
22 K/W
KBJ
15K
KBJ
15M
Unit
2
µA
s
Note: 1. Thermal resistance junction to ambient, mounted on PCB at 9.5mm lead length.
2. Thermal resistance junction to case, mounted on 7.5 x 7.5 x 0.8cm thick AL plate heatsink.
KBJ15A – KBJ15M 1 of 3 © 2002 Won-Top Electronics
18
15
12
100
T = 25 C
°
j
10
9
FSM
I , PEAK FORWARD SURGE CURRENT (A)
O
I , AVERAGE RECTIFIED CURRENT (A)
6
3
Resistive or
Inductive load
0
0
25 50 75 100 125 150
T,TEMPERATURE(C)
°
Fig.1ForwardCurrentDeratingCurve
Single half-sine-wave
200
150
100
50
0
1
10
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Maximum Non-Repetitive Surge Current
(JEDEC method)
T=25Cj°
100
1.0
Pulse width = 300 sµ
F
I , INSTANTANEOUS FORWARD CURRENT (A)
0.1
0.2
0.0
V , INSTANTANEOUS FORWARD VOLTAGE (V)
F
0.6 1.0
Fig.2TypicalFwdCharacteristics, per element
1000
100
j
C , JUNCTION CAPACITANCE (pF)
10
110100
V , REVERSE VOLTAGE (V)
R
Fig. 4 Typical Junction Capacitance
1.4
T=25C
j
f = 1.0MHz
1.8
°
KBJ15A – KBJ15M 2 of 3 © 2002 Won-Top Electronics
ORDERING INFORMA TION
Product No. Package Type Shipping Quantity
KBJ15A SIL Bridge 20 Units/Tube
KBJ15B SIL Bridge 20 Units/Tube
KBJ15D SIL Bridge 20 Units/Tube
KBJ15G SIL Bridge 20 Units/Tube
KBJ15J SIL Bridge 20 Units/Tube
KBJ15K SIL Bridge 20 Units/Tube
KBJ15M SIL Bridge 20 Units/Tube
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone:
Fax:
Email:
Internet:
KBJ15A – KBJ15M 3 of 3 © 2002 Won-Top Electronics
: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
886-7-822-5408 or 886-7-822-5410
886-7-822-5417
sales@wontop.com
http://www.wontop.com
We power your everyday.
Loading...