WTE DD302, DD301S, DD301, DD306S, DD300 Datasheet

...

WTE

POWER SEMICONDUCTORS

DD300/S – DD306/S

30A 8.4mm/9.5mm DISH DIODE

Features

Glass Passivated Die Construction

Low Leakage

Low Cost C

High Surge Current Capability

Low Forward

C-Band Terminal Construction D

Mechanical Data

Case: All Copper Case and Components

Hermetically Sealed A

Terminals: Contact Areas Readily Solderable

Polarity: Cathode to Case(Reverse Units Are

Available Upon Request and Are Designated

Dim Min Max Min Max

By An “R” Suffix, i.e. DD302R or DD304SR)

Polarity: Red Color Equals Standard,

Black Color Equals Reverse Polarity

Mounting Position: Any

A B C D

8.4mm Dish 9.5mm Dish

8.35 8.45 9.50 9.72

2.0 2.16 2.0 2.16

1.43 1.47 1.43 1.47

22.3 — 22.3 — All Dimensions in mm

“S” Suffix Designates 8.4mm Dish No Suffix Designates 9.5mm Dish

Maximum Ratings and Electrical Characteristics

Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.

Characteristic Symbol

Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage

RMS Reverse Voltage V

Average Rectified Output Current @TA = 150°C I Non-Repetitive Peak Forward Surge Current

8.3ms Single half sine-wave superimposed on rated load (JEDEC Method)

Forward Voltage @IF = 30A V Peak Reverse Current @TA = 25°C

At Rated DC Blocking Voltage @T Typical Junction Capacitance (Note 1) C

Typical Thermal Resistance Junction to Case (Note 2)

= 100°C

R(RMS)

DD300/SDD301/SDD302/SDD303/SDD304/SDD305/SDD306/

RRM

RWM

FSM



50 100 200 300 400 500 600 V

35 70 140 210 280 350 420 V

@TA=25°C unless otherwise specified

30 A

400 A

1.1 V

100 500

300 pF

1.0 K/W

Unit

µA

Operating and Storage Temperature Range TJ, T

Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.

2. Thermal Resistance: Junction to case, single side cooled.

STG

-65 to +175 °C

ORDERING INFORMA TION

Product No. Package Type Shipping Quantity

DD300 Press Fit 200 Units/Tray DD300S Press Fit 200 Units/Tray DD301 Press Fit 200 Units/Tray DD301S Press Fit 200 Units/Tray DD302 Press Fit 200 Units/Tray DD302S Press Fit 200 Units/Tray DD303 Press Fit 200 Units/Tray DD303S Press Fit 200 Units/Tray DD304 Press Fit 200 Units/Tray DD304S Press Fit 200 Units/Tray DD305 Press Fit 200 Units/Tray DD305S Press Fit 200 Units/Tray DD306 Press Fit 200 Units/Tray DD306S Press Fit 200 Units/Tray

Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department.

Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice.

WARNING

support devices or systems without the express written approval.

Won-Top Electronics Co., Ltd.

No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan

Phone: Fax: Email: Internet:

: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life

886-7-822-5408 or 886-7-822-5410

886-7-822-5417

sales@wontop.com

http://www.wontop.com

We power your everyday.