14.4 V LITHIUM-ION
CORDLESS DRILL
USER GUIDE
AFTER SALES SUPPORT
www.einhell.co.uk
t
0151 649 1500
WZAS 14,4/1 Li
XI/18/2012
(Charged at local rates)
D
1890 946 6244
Now you have purchased a Workzone® product you
can rest assured in the knowledge that as well as your
3 year parts and labour guarantee you have the added
peace of mind of dedicated helplines and web support.
WZAS_14_4_1_Li_UK_SPK7.indb 1 30.07.12 08:49
2
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
Congratulations!
You have made an excellent choice with the purchase of this quality Workzone® product.
By doing so you now have the assurance and peace of mind which comes from purchasing
a product that has been manufactured to the highest standards of performance and
safety, supported by the high quality standards of ALDI.
We want you to be completely satisfied with your purchase so this Workzone® product
is backed by a comprehensive manufacturer’s 3 year warranty and an outstanding
after sales service through our dedicated Helpline.
We hope you will enjoy using your purchase for many years to come.
If you require technical support or in the unlikely event that your purchase is faulty please
telephone our Helpline for immediate assistance. Faulty product claims made within
the 3 year warranty period will be repaired or replaced free of charge provided that you
have satisfactory proof of purchase (keep your till receipt safe!). This does not aff ect your
statutory rights. However, be aware that the warranty will become null and void if the
product is found to have been deliberately damaged, misused or disassembled.
WZAS_14_4_1_Li_UK_SPK7.indb 2 30.07.12 08:49
3
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
Table of contents
04 Safety information
14 Items supplied
15 Layout
16 Use
17 Before putting into operation
18 Operation
23 Information
29 Guarantee Certificate
WZAS_14_4_1_Li_UK_SPK7.indb 3 30.07.12 08:49
4
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
General safety information for power tools
Important.
When using equipment, a few safety precautions must be observed
to avoid injuries and damage. Please read the complete operating
instructions and safety information with due care. Keep these operating
instructions in a safe place so that the information is available at all times.
If you give the equipment to any other person, hand over these operating
instructions and the safety information as well. We cannot accept any
liability for damage or accidents which arise due to a failure to follow
these instructions and the safety information.
Important.
Read all the safety regulations and instructions. Any errors made in
following the safety information and instructions set out below may
result in an electric shock, fire and/or serious injury.
Keep all safety information and instructions in a safe place for
future use.
The term “power tool“ used in the safety regulations refers to power
tools operated from the mains power supply (with a power cable) and to
battery operated power tools (without a power cable).
1. Workplace safety
• Keep your work area clean and well lit. Untidy or unlit work areas
can result in accidents.
• Do not use this power tool in an area where there is a risk of
explosion and where there are inflammable liquids, gases or
dust. Power tools generate sparks that can ignite dust or vapors.
• Keep children and other people away from the power tool while
you are using it. If you are distracted you may lose control of the
tool.
1
Safety information
WZAS_14_4_1_Li_UK_SPK7.indb 4 30.07.12 08:49
5
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
2. Electrical safety
• The plug on the power tool must fit into the socket. The socket
must not be modified in any way. Do not use adapter plugs
together with power tools with a protective earth. Unmodified
plugs and matching sockets will reduce the risk of an electric shock.
• Avoid body contact with earthed surfaces such as pipes, heating
systems, stoves and refrigerators. There is an increased risk of
suffering an electric shock if your body is earthed.
• Keep the power tool out of the rain and away from moisture. The
ingress of water into an electric power tool increases the risk of an
electric shock.
• Do not use the cable for a purpose for which it is not designed,
for example to carry the power tool, hang it up or to pull the
plug out of the socket. Keep the cable away from heat, oil, sharp
edges or moving parts of the tool. Cables that are damaged or
tangled increase the risk of an electric shock.
• If you use an electric power tool outdoors, use only extension
cables that are suitable for outdoor use. The use of an extension
cable which is suitable for outdoor use reduces the risk of an electric
shock.
• If you cannot avoid using the power tool in a damp location,
use a residual current device (RCD) circuit breaker. The use of a
residual current device (RCD) circuit breaker will reduce the risk of
suffering an electric shock.
3. Safety of persons
• Be careful, watch what you are doing and be sensible and
responsible when using an electric power tool. Never use the
power tool if you are tired or under the influence of drugs,
alcohol or medication. One moment of inattention when using the
electric tool can result in serious injuries.
• Wear personal safety equipment and always wear safety
goggles. Wearing personal safety equipment such as dust masks,
non-slip safety shoes, a helmet or ear plugs, depending on the type
and application of the tool, reduces the risk of injury.
• Make sure that the tool cannot start up accidentally. Ensure that
the power tool is switched off before you connect it to the power
supply and/or connect the battery pack, pick it up or carry it. If you
WZAS_14_4_1_Li_UK_SPK7.indb 5 30.07.12 08:49
6
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
have your finger on the switch while carrying the power tool or if you
connect the tool to the power supply while it is switched on, this may
cause accidents.
• Remove all adjusting tools or wrenches before you switch on the
power tool. Any tool or wrench in a rotating part of the tool could
cause injuries.
• Avoid abnormal working postures. Make sure you stand squarely
and keep your balance at all times. This will enable you to control
the power tool better in unexpected situations.
• Wear suitable clothes. Never wear loose fitting clothes or
jewelry. Keep hair, clothing and gloves away from moving parts.
Loose clothing, jewelry or long hair can be caught by moving parts.
• If you can fit dust extraction devices and dust collection devices
to the tool, ensure that they are correctly connected and used
for the correct purposes. The use of a dust extractor can reduce the
dangers posed by dust.
4. Using and handling the power tool
• Do not overload the equipment. Use the correct electric tool for
the job in hand. The correct tool will enable you to work better and
more safely within the specific performance range.
• Do not use an electric power tool if the switch is defective. An
electric power tool that cannot be switched on or off is dangerous
and must be repaired.
• Pull the plug out of the socket and/or remove the battery pack
before making any adjustments to the tool, changing accessories
or putting the tool down. These precautions will prevent the power
tool starting accidentally.
• Keep unused electric tools out of the reach of children. Do not
allow people who are not familiar with the tool or who have not
read these instructions to use the tool. Electric tools are dangerous
if they are used by inexperienced people.
• Look after power tools with care. Check that moving parts
function correctly and do not jam, and whether any parts are
broken or damaged such that they adversely affect the function
of the power tool. Have damaged parts repaired before you use
the tool. Many accidents are caused by poorly maintained electric
tools.
WZAS_14_4_1_Li_UK_SPK7.indb 6 30.07.12 08:49
7
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
• Keep your cutting tools sharp and clean. Carefully maintained
cutting tools with sharp cutting edges will jam less and are easier to
control.
• Use the power tool, accessory plug-in tools, etc. as set out in
these instructions. Take the conditions in your work area and the
job in hand into account. Using electric tools for purposes other
than the one for which they are designed can result in dangerous
situations.
5. Using and handling the cordless tool
• Only charge the batteries in chargers that are recommended by
the manufacturer. A charger that is designed for a certain type of
battery may pose a fire risk if it is used with other types of battery.
• Use only the correct batteries in the electric tools. The use of other
batteries may result in injuries and a fire risk.
• Keep unused batteries away from paper clips, coins, keys, nails,
screws and other metallic objects that could cause a short circuit
between the contacts. A short circuit between the battery contacts
may cause burns or a fire.
• In case of incorrect use, fluid may escape from the battery. Avoid
contact with it. If you touch it by accident, rinse the affected area
with water. If you get the fluid in your eyes, also seek medical
advice. Leaking battery fluid can cause skin irritation or burns.
6. Service
• Have your power tool repaired only by trained personnel using
only genuine spare parts. This will ensure that your power tool
remains safe to use.
Safety information for drills
• Wear ear plugs when using hammer drills. The impact of noise can
cause damage to hearing.
• Use the additional handles supplied with the tool. Losing control
of the machine can cause injuries.
Hold the equipment by the insulated handles when carrying
out work during which the screw or the plug-in tool could strike
concealed power cables. Contact with a live cable may also make the
metal parts of the equipment live and cause an electric shock.
WZAS_14_4_1_Li_UK_SPK7.indb 7 30.07.12 08:49
8
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
Additional safety instructions
We pay a great deal of attention to the design of every battery pack to
ensure that we supply you with batteries which feature maximum power
density, durability and safety. The battery cells have a wide range of
safety devices. Each individual cell is initially formatted and its electrical
characteristic curves are recorded. These data are then used exclusively
to be able to assemble the best possible battery packs. Despite all the
safety precautions, caution must always be exercised when handling
batteries. The following points must be obeyed at all times to ensure
safe use.
Safe use can only be guaranteed if undamaged cells are used.
Incorrect handling can cause cell damage.
Important.
Analyses confirm that incorrect use and poor care are the main causes of
the damage caused by high performance batteries.
Information about the battery
• Ensure that the equipment is switched off before you insert the
battery. Inserting a battery into an electric tool that is switched on
can cause accidents.
• The battery pack supplied with your cordless tool is not charged. The
battery pack has to be charged before you use the tool for the first
time.
• For optimum battery performance avoid low discharge cycles.
Charge the battery pack frequently.
• Store the battery pack in a cool place, ideally at 15°C and charged to
at least 40%.
• Lithium-ion batteries are subject to a natural ageing process. The
battery pack must be replaced at the latest when its capacity falls to
just 60% of its capacity when new. Weakened cells in an aged battery
pack are no longer capable of meeting the high power requirements
and therefore pose a safety risk.
• Do not throw battery packs into an open fire. There is a risk of
explosion!
• Do not ignite the battery pack or expose it to fire.
WZAS_14_4_1_Li_UK_SPK7.indb 8 30.07.12 08:49
9
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
• Do not completely discharge batteries.
The cells of batteries are damaged when they are completely
discharged. The most common cause of complete battery discharge
is lengthy storage or non-use of partly discharged batteries. Stop
working as soon as the performance of the battery falls noticeably or
the electronic protection system triggers. Place the battery pack in
storage only after it has been fully charged.
• Protect batteries and the tool from overloads.
Overloads will quickly result in overheating and cell damage inside
the battery housing without this overheating actually being apparent
externally.
• Avoid damage and shocks.
Replace batteries which have been dropped from a height of more
than one meter or which have been exposed to violent shocks
without delay, even if the housing of the battery pack appears to be
undamaged. The battery cells inside the battery may have suffered
serious damage. In this respect, please also read the waste disposal
information.
• If the battery pack suffers overloading and overheating, the
integrated protective cut-off will switch off the equipment for safety
reasons. Important! Do not press the ON/OFF switch any more if the
protective cut-off has actuated. This may damage the battery.
• Use only original battery packs. The use of other batteries may result
in injuries, explosion and a fire risk.
Information on chargers and the charging process
• Important. The charging of NON-rechargeable batteries is
prohibited.
• This equipment is not designed to be used by people (including
children) with limited physical, sensory or mental capacities or those
with no experience and/or knowledge unless they are supervised
by a person who is responsible for their safety or they have received
instructions from such a person in how to use the equipment safely.
Children must always be supervised in order to ensure that they do
not play with the equipment.
WZAS_14_4_1_Li_UK_SPK7.indb 9 30.07.12 08:49
10
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
• Please check the data marked on the rating plate of the battery
charger. Be sure to connect the battery charger to a power supply
with the voltage marked on the rating plate. Never connect it to a
different mains voltage.
• Protect the battery charger and its cable from damage and sharp
edges. Have damaged cables repaired without delay by a qualified
electrician.
• Keep the battery charger, batteries and the cordless tool out of
children‘s reach.
• Do not use damaged battery chargers.
• Do not use the supplied battery charger to charge other cordless
tools.
• In heavy use the battery pack will become warm. Allow the battery
pack to cool to room temperature before commencing with the
charging.
• Do not over-charge batteries.
Do not exceed the maximum charging times. These charging times
apply only to discharged batteries. Frequent insertion of a charged
or partly charged battery pack will result in over-charging and cell
damage. Do not leave batteries in the charger for days on end.
• Never use or charge batteries if you suspect that the last time
they were charged was more than 12 months previously. There
is a high probability that the battery pack has already suffered cell
damage as a result of complete battery discharge.
• Charging batteries at a temperature below 10°C will cause chemical
damage to the cell and may cause a fire.
• Do not use batteries which have heated during the charging process,
as the battery cells may have suffered dangerous damage.
• Do not use batteries which have suffered curvature or deformation
during the charging process or which show other non-typical
symptoms (gassing, hissing, cracking,…)
• Never fully discharge the battery pack (recommended depth of
discharge max. 80%) A complete discharge of the battery pack will
lead to premature ageing of the battery cells.
• Never charge the batteries unsupervised.
WZAS_14_4_1_Li_UK_SPK7.indb 10 30.07.12 08:49
11
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
Protection from environmental influences
• Wear suitable work clothes. Wear safety goggles.
• Protect your cordless tool and the battery charger from moisture and
rain. Moisture and rain can cause dangerous cell damage.
• Do not use the cordless tool or the battery charger near vapors and
inflammable liquids.
• Use the battery charger and cordless tools only in dry conditions and
an ambient temperature of 10-40°C.
• Do not keep the battery charger in places where the temperature
is liable to reach over 40°C. In particular, do not leave the battery
charger in a car that is parked in the sunshine.
• Protect batteries from overheating. Overloads, over-charging and
exposure to direct sunlight will result in overheating and cell damage.
Never charge or work with batteries which have been overheated –
replace them immediately if possible.
• Storage of batteries, battery chargers and cordless tools.
Store the charger and your cordless tool only in dry places with an
ambient temperature of 10-40°C. Store your lithium-ion battery
pack in a cool, dry place at a temperature of 10-20°C. Protect from
humidity and direct sunlight. Place only fully charged batteries in
storage (charged at least 40%).
• Prevent the lithium-ion battery pack from freezing. Battery packs
which were stored below 0°C for more than 60 minutes must be
disposed of.
• When handling batteries beware of electrostatic charge: Electrostatic
discharges cause damage of the electronic protection system and
the battery cells. Avoid electrostatic charging and never touch the
battery poles.
Do not lose this safety information.
WZAS_14_4_1_Li_UK_SPK7.indb 11 30.07.12 08:49
12
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
To avoid causing damage to the gearing, change the gear
only when the equipment is at a standstill.
Store the battery only in dry rooms with an ambient
temperature of +10°C to +40°C. Place only charged
batteries in storage (charged at least 40%).
10°C- 40°C
The battery should be charged only at a temperature
between 10°C and 40°C.
WZAS_14_4_1_Li_UK_SPK7.indb 12 30.07.12 08:49
13
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
“WARNING - Read the operating instructions in order to reduce the
risk of injury“
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Wear safety goggles.
Sparks generated during work or splinters, chips and dust emitted by the
equipment can cause loss of sight.
Wear a breathing mask.
Dust which is injurious to health can be generated when working on
wood and other materials. Never use the tool to work on any materials
containing asbestos!
WZAS_14_4_1_Li_UK_SPK7.indb 13 30.07.12 08:49
14
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
2
Items supplied
• Open the packaging and take out the equipment with care.
• Remove the packaging material and any packaging and/or
transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport damage.
• If possible, please keep the packaging until the end of the guarantee
period.
Important!
The equipment and packaging material are not toys. Do not let children
play with plastic bags, foils or small parts. There is a danger of swallowing
or suffocating!
• Cordless drill/screwdriver
• Battery charger
• Charging adapter
• 8 drill bits
• 8 screwdriver bits
• Original operating instructions
WZAS_14_4_1_Li_UK_SPK7.indb 14 30.07.12 08:49
15
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
3
Layout
1. Torque selector
2. Quick-change drill chuck
3. Changeover switch
4. ON/OFF switch
5. Battery
6. Battery charger
7. Selector switch for 1st/2nd gear
8. Pushlock button
9. LED light
10. Battery capacity indicator
11. Switch for battery capacity indicator
12. Charging adapter
1
4
2
5
1 7 10
11
3
9
86 12
This model
contains a
UK
3-pin plug
WZAS_14_4_1_Li_UK_SPK7.indb 15 30.07.12 08:50
16
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
4
Use
The cordless drill/screwdriver is designed for tightening and undoing
screws, as well as for drilling in wood, metal and plastic.
The equipment is to be used only for its prescribed purpose. Any other
use is deemed to be a case of misuse. The user/operator and not the
manufacturer will be liable for any damage or injuries of any kind caused
as a result of this.
Please note that our equipment has not been designed for use in
commercial, trade or industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or industrial businesses or
for equivalent purposes.
WZAS_14_4_1_Li_UK_SPK7.indb 16 30.07.12 08:50
17
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
5
Before putting into operation
Be sure to read the following information before you put the cordless
screwdriver into operation:
1. Charge the battery pack only with the charger supplied.
2. Only ever use sharp drill bits and screwdriver bits which are suitable
for the purpose and in faultless condition.
3. Always check for concealed electric cables and gas and water pipes
when drilling and screwing in walls.
WZAS_14_4_1_Li_UK_SPK7.indb 17 30.07.12 08:50
18
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
6
Operation
6.1 Charging the battery (Fig. 2-3)
Important! At below 10° C, charging is reduced in keeping with the
charger‘s intelligent safety concept. This may mean that the battery
pack will not be fully charged. At below 0° C and above 40° C there is no
charging performed.
The battery is protected from exhaustive discharge. An integrated
protective circuit automatically switches off the equipment when the
battery is flat. In this case the bit chuck will cease to turn. Warning! Do
not press the ON/OFF switch any more if the protective circuit has
actuated. This may damage the battery.
1. Remove the battery pack (5) from the handle, pressing the pushlock
buttons (8) downwards to do so.
2. Check that your mains voltage is the same as that marked on the
rating plate of the battery charger. Plug the mains plug of the charger
(6) into the mains socket outlet.
3. Connect the charging cable (a) to the charging adapter (12).
4. The green LED on the charger will flash. Plug the battery (5) into
the charging adapter (12). Now the red LED will come on to indicate
that the battery pack is being charged. When the charging process
is finished, the green LED will be permanently lit. The time it takes
to fully recharge an empty battery is approximately 1 hour. The
temperature of the battery may rise slightly during the charging
operation. This is normal. If the red and green LED flashes after the
battery has been inserted, the battery is defective. In this case, pull
out the mains plug of the charger immediately and remove the
defective battery. Do not use the defective battery again. If the red
and green LED on the charger lights up while the battery pack is
inserted, the charging temperature is either too high or too low.
In this case, pull out the mains plug of the charger and charge the
battery in an environment in which the temperature is either warmer
or colder.
There is no risk in leaving the battery in the charger as the charging is
ended automatically. However, you should disconnect the charger from the
battery and from the power supply so as not to waste electricity.
WZAS_14_4_1_Li_UK_SPK7.indb 18 30.07.12 08:50
19
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
If the battery pack fails to charge, check for the following:
• Voltage at the socket-outlet
• Proper contact at the charging contacts in the battery charger
If the battery pack still fails to charge, send
• the battery charger
• and the battery pack to our customer services department.
To ensure that the battery pack provides long service, you should take
care to recharge it promptly. You must recharge the battery pack when
you notice that the power of the cordless equipment drops.
6.2 Torque setting (Fig. 4/Item 1)
The cordless screwdriver is fitted with a mechanical torque selector.
The torque for each screw size is set with the setting ring (1). The torque
is dependent on a number of factors:
• On the type and hardness of the material involved
• On the type and length of the screws used
• On the requirements that the screw connection has to satisfy
The grating disengagement of the coupling indicates that the selected
torque level has been reached.
Important! Only ever adjust the setting ring when the equipment is
at a standstill.
2 3
8
5
1.
2.
12
5
a
WZAS_14_4_1_Li_UK_SPK7.indb 19 30.07.12 08:50
20
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
6.3 Drilling (Fig. 4/Item 1)
For drilling adjust the setting ring for the torque to the last setting “Drill”.
In this drill setting the slip coupling is non-functional. The maximum
torque is available for drilling.
6.4 Changeover switch (Fig. 5/Item 3)
The slide switch above the ON/OFF switch is for setting the direction
of rotation of the cordless screwdriver and for preventing the cordless
screwdriver from being switched on inadvertently. You can select
between clockwise and counter-clockwise rotation. To avoid causing
damage to the gearing, the direction of rotation must only be changed
when the screwdriver is at a standstill. When the slide switch is in the
middle position, the ON/OFF switch is blocked.
6.5 ON/OFF switch (Fig. 5/Item 4)
Infinitely variable speed control is possible with the ON/OFF switch.
The further you push the switch, the higher the speed of the cordless
screwdriver.
4 5
4
1
3
WZAS_14_4_1_Li_UK_SPK7.indb 20 30.07.12 08:50
21
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
6.6 Battery capacity indicator (Fig. 6/Item 10)
Press the button for the battery capacity indicator (11). The battery
capacity indicator (10) indicates the charge state of the battery on 3
colored LEDs.
All the LEDs are lit:
The battery is fully charged.
The yellow and red LEDs are lit:
The battery has an adequate remaining charge.
Red LED:
The battery is empty, recharge the battery.
6.7 Changing the tool (Fig. 7)
Important. Set the changeover switch (3) to its centre position whenever
you carry out any work (for example changing the tool, maintenance
work, etc.) on the cordless screwdriver.
• The cordless screwdriver is fitted with a quick-action chuck (2) with
an automatic spindle stop.
• Turn the chuck (2) counter-clockwise so that it opens.
• The chuck opening (a) must be large enough to hold the tool (drill bit
or screwdriver bit).
• Select the suitable tool. Push the tool as far as possible into the chuck
opening (a).
• Turn the chuck (2) counter-clockwise so that it closes tightly and then
check that the tool is secure.
6 7
10
a
11
2
WZAS_14_4_1_Li_UK_SPK7.indb 21 30.07.12 08:50
22
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
6.8 Screwing
It is advisable to use self-centering screws (e.g. Torx, cross recessed
head) as these will enable you to work safely and reliably. Always make
sure that the bit used is of the same size and shape as the screw. Set the
torque to suit the screw size as specified in the instructions.
6.9 LED lamp (Fig. 1/Item 9)
The LED lamp (9) can be used to additionally illuminate the area where
you want to screw or drill.
The LED lamp (9) will be lit automatically as soon as you press the ON/
OFF switch (4).
6.10 Switching between speed 1 and speed 2 (Fig. 8/Item 7)
You can work with a higher or lower speed depending on the position of
the selector switch. Change the gear only when the drill is at a standstill. If
you fail to observe this point, the gearing may be damaged.
8
7
2
1
WZAS_14_4_1_Li_UK_SPK7.indb 22 30.07.12 08:50
23
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
7
Information
Cleaning, maintenance and ordering of spare parts
Always pull out the power plug before starting any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt
and dust as far as possible. Wipe the equipment with a clean cloth or
blow it down with compressed air at low pressure.
• We recommend that you clean the equipment immediately after you
use it.
• Clean the equipment regularly with a damp cloth and some
soft soap. Do not use cleaning agents or solvents; these may be
aggressive to the plastic parts in the equipment. Ensure that no water
can get into the interior of the equipment.
Maintenance
There are no parts inside the equipment which require additional
maintenance.
Ordering spare parts
Please provide the following information on all orders for spare parts:
• Model/type of the equipment
• Article number of the equipment
• ID number of the equipment
• Spare part number of the required spare part
For our latest prices and information please go to www.isc-gmbh.info
Item Description Replacement part no.
05 Battery 451132601001
06 Battery charger 451319101001
02 Drill chuck 451319101002
04 ON/OFF switch 451319101003
WZAS_14_4_1_Li_UK_SPK7.indb 23 30.07.12 08:50
24
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
Disposal and recycling
The equipment is supplied in packaging to prevent it from being
damaged in transit. The raw materials in this packaging can be reused or
recycled. The equipment and its accessories are made of various types
of material, such as metal and plastic. Defective components must be
disposed of as special waste. Ask your dealer or your local council.
Refer to the additional information on page 27.
Storage
Store the equipment and accessories out of children‘s reach in a dark and
dry place at above freezing temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its original packaging.
Technical data
Motor power supply: ..................................................................................... 14.4 V DC
Idling speed: .................................................................................... 0-350/0-1200 rpm
Torque settings: ........................................................................................................ 19 +1
Clockwise/counter-clockwise: ................................................................................ Yes
Drill chuck clamping range: ................................................................ 1 mm-10 mm
Rated battery capacity: ....................................................................................... 1.3 Ah
Battery charge voltage: ....................................................................................17 V DC
Battery charge current: ......................................................................................... 1.5 A
Charger supply voltage: ...................................................................... 230 V ~ 50 Hz
Charging time: ............................................................................................ max. 1 hour
Battery type: ................................................................................................ Lithium-ion
Weight: ...................................................................................................................... 1.6 kg
Screw diameter: ..................................................................................................... 6 mm
WZAS_14_4_1_Li_UK_SPK7.indb 24 30.07.12 08:50
25
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
Sound and vibration
Sound and vibration values were measured in accordance with EN 60745.
LpA sound pressure level ................................................................................ 64 dB(A)
KpA uncertainty .......................................................................................................... 4 dB
LWA sound power level .................................................................................... 75 dB(A)
KWA uncertainty ......................................................................................................... 4 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) determined in
accordance with EN 60745.
Drilling in metal
Vibration emission value ah = 3.2 m/s
2
K uncertainty = 1.5 m/s
2
Screwing without hammer action
Vibration emission value ah ≤ 2.5 m/s
2
K uncertainty = 1.5 m/s
2
Additional information for electric power tools
Warning!
The specified vibration value was established in accordance with a
standardized testing method. It may change according to how the
electric equipment is used and may exceed the specified value in
exceptional circumstances.
WZAS_14_4_1_Li_UK_SPK7.indb 25 30.07.12 08:50
26
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
The specified vibration value can be used to compare the equipment
with another electric power tool.
The specified vibration value can be used for initial assessment of a
harmful effect.
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.
Residual risks
Even if you use this electric power tool in accordance with the
instructions, certain residual risks cannot be eliminated. The following
hazards may arise in connection with the equipment‘s construction and
layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is applied.
3. Health damage caused by hand-arm vibrations if the equipment is
used over a longer period or is not properly guided and maintained.
WZAS_14_4_1_Li_UK_SPK7.indb 26 30.07.12 08:50
27
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
Rechargeable batteries and cordless electric machines and tools contain
materials that are potentially harmful to the environment. Never place
any cordless electric machines or tools in your household refuse. When
cordless electric machines or tools become defective or worn, remove
the rechargeable batteries and return them to iSC GmbH (address:
Eschenstrasse 6, D-94405, Germany). If the rechargeable batteries cannot
be removed, return the complete cordless machine or tool. You can
then be sure that the equipment will be correctly disposed of by the
manufacturer.
When shipping or disposing of batteries and cordless tools, always
ensure that they are packed individually in plastic bags to prevent
short circuits and fires.
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2002/96/EC concerning old electric
and electronic equipment and its implementation in national laws, old
electric power tools have to be separated from other waste and disposed
of in an environment-friendly fashion, e.g. by taking to a recycling depot.
WZAS_14_4_1_Li_UK_SPK7.indb 27 30.07.12 08:50
28
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
Recycling alternative to the return request: Instead of returning the
equipment to the manufacturer, the owner of the electrical equipment
is obliged to ensure that the equipment is properly disposed of if he
abandons ownership. The old equipment can be returned to a suitable
collection point that will dispose of the equipment in accordance with the
national recycling and waste disposal regulations. This does not apply to
any accessories or aids without electrical components supplied with the
old equipment .
The reprinting or reproduction by any other means, in whole or in part,
of documentation and papers accompanying products is permitted only
with the express consent of the ISC GmbH.
Subject to technical changes.
This consignment contains lithium-ion batteries. In accordance with
special provision 188 this consignment is not subject to the ADR
regulations. Handle with care. Danger of ignition in case of damage to the
consignment package. If the consignment package is damaged: Check
and if necessary repackage.
For further information contact: 0049 1805 / 687486 (fixed network 14 ct/
min; mobile phone max. 42 ct/min). Outside Germany charges will apply
instead for a regular call to a landline number in Germany.
WZAS_14_4_1_Li_UK_SPK7.indb 28 30.07.12 08:50
29
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
8
Guarantee Certificate
Dear Customer,
All of our products undergo strict quality checks to ensure that they reach you in perfect
condition. In the unlikely event that your cordless drill/screwdriver develops a fault, please contact
our service department at the address shown on this guarantee card. You can also contact us by
telephone using the service number shown below. Please note the following terms under which
guarantee claims can be made:
1. Our guarantee covers only problems caused by material or manufacturing defects, and it is
restricted to the rectification of these defects or the replacement of the equipment.
It does not cover replacement work for transport damage, damage caused by failure to
follow the assembly and operating instructions, damage through misuse or incorrect
applications, damage caused by failure to follow the maintenance and safety instructions,
damage resulting from the use of force and external effects, or the normal wear and tear
which arises during the proper use of the product.
The guarantee is rendered null and void if any attempt is made to tamper with the equipment.
2. No guarantee claims will be accepted after the end of the guarantee period. This also
applies if an on-site service is used.
The guarantee is valid for a period of three years starting from the purchase date. Keep your sales
receipt in a safe place, as it is your proof of purchase.
Your statutory rights are not affected by this guarantee. During the guarantee period you can
report defective equipment by phone or by writing to the service address below. We will arrange
as soon as possible for the defective equipment to be picked up from your address at no charge
and will then supply you with a new or repaired replacement free of charge. Of course you can
also return the defective equipment to the address below yourself (carriage forward).
Please prepare the equipment for the pick-up service (pack it in the original box or comparable
box). You can make the arrangements for the pick-up yourself at the website below.
Please note that you or someone acting on your behalf must be available throughout the pick-up
day. Don‘t forget to specify a pick-up address.
During non-office hours you can leave your phone number and we will call you back on the next
work day.
After the guarantee period has elapsed you can still send a defective item to the address below for
repair. When the guarantee period has ended, you must pay the costs of all repairs.
Einhell UK
Unit 5,
Morpeth Wharf, Twelve Quays,
Birkenhead,
Wirral,
CH41 1LF
XI/18/2012
WZAS_14_4_1_Li_UK_SPK7.indb 29 30.07.12 08:50
30
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
14.4 V LITHIUM-ION
CORDLESS DRILL/SCREWDRIVER
Your details:
Name
Address
E mail
Date of purchase*
*We recommend you keep the receipt with this warranty card
Location of purchase
Description of malfunction:
Return your completed warranty card to:
Einhell UK
Unit 5
Morpeth Wharf, Twelve Quays
Birkenhead
Wirral
CH 41 1LF
sales@einhell.co.uk
technical@einhell.co.uk
AFTER SALES SUPPORT
www.einhell.co.uk
t
0151 649 1500
WZAS 14,4/1 Li
XI/18/2012
(Charged at local rates)
D
1890 946 6244
YEAR WARRANTY
WZAS_14_4_1_Li_UK_SPK7.indb 30 30.07.12 08:50
31
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
WZAS_14_4_1_Li_UK_SPK7.indb 31 30.07.12 08:50
EH 07/2012 (02)
WZAS_14_4_1_Li_UK_SPK7.indb 32 30.07.12 08:50
Loading...