BRUSHLESS CIRCULAR
SAW SKIN 184MM
1x Circular Saw Skin
1 x
184mm Cutting Blade
1 x Parallel Guide
1 x Allen Key
1 x Dust Extraction
Adapter
1 x Instruction Manual
1 x Quick Start Guide
1 x Warranty Certicate
1300 889 028
info.aldi@positecgroup.com
MODEL: CS20V PRODUCT CODE: 63350 01/2019
00
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
2 3
Contents
Welcome
Congratulations in choosing to buy a Workzone® Titanium 20V
Li-Ion Cordless Brushless 184mm Circular Saw (battery / charger
not included).
All products bought to you by Workzone® Titanium are
manufactured to the highest standards of performance and safety
and, as part of our philosophy of customer service and satisfaction,
are backed by our comprehensive 5 Year Warranty. We hope you will
enjoy your purchase for many years to come.
do not operate the product until the parts have been replaced or
personal injury.
Application 4
Package Content List 4
Parts description 5
Description of symbols 8
General safety warnings 9
Safety notes for battery/charger. 16
Additional safety rules for charger & batteries 17
Important information – Product care 18
Assembly 19
Operation 20
Maintenance 2
Warranty
FAQ/Troubleshooting 3
Technical Specications 3
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
4 5
3. Parts description
WARNING! To reduce risk of injury, only use 20V Xfinity Plus
battery packs. Other type of battery packs may burst causing personal
injury and damage. The battery pack must be recharged only with a
20V Xfinity Plus battery charger
WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your power tool
should only be passed on together with this instruction manual.
LED light
Allen Key
Blade rotation
indicator
Trigger switch
Lock off button
Motor housing
Main handle
Front handle
Bevel adjustment knob
Bevel scale
Parallel guide locking knob
Parallel guide
Blade guard lever
Lower blade guard
Base plate
Upper blade guard
Dust extraction BEBQUFS
Depth locking lever
Depth of cut
indicator
Spindle lock button
Blade
Blade guide notch
Parallel guide slots
Blade bolt
Inner blade flange
Outer blade flange
Battery Pack (
NOTINCLUDED
SHOWNONLYFORILLUSTRATIVEAND
INSTRUCTIONALPURPOSESONLY
)
Battery Pack release tab
20V Charger (NOTINCLUDED
SHOWNONLYFORILLUSTRATIVEAND
INSTRUCTIONALPURPOSESONLY
)
Spindle
Pack c
184MM LI-ION BR
ontents / par
USHLESS CIRtsCULAW SAW – CS20V
1. Application
First time users or inexperienced operators pay particular attention to
the operation of the 20V Li-Ion 184mm Brushless Circular Saw, including
details of starting and stopping and correct use of the 20V Li-Ion 184mm
Brushless Circular Saw on pages, as well as the maintenance
instructions on pages .
Intended use of the the 20V Li-Ion 184mm Brushless Circular Saw
(battery / charger not included)
NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial or trade use.
This 20V Li-Ion 184mm Brushless Circular Saw is used for ripping and
cross cutting of wood. Use the tool only for intended applications.
2. Package Content List
1 x Circular Saw Skin
1 x Parallel Guide
1 x Allen Key (fitted)
1 x Dust Extraction AdapterGJUUFE
1 x Instruction Manual
1 x Quick Start Guide
1 x Warranty Card
• Remove all
packing materials
• Ensure all parts on the contents
list are present
• Check the appliance, and all
accessories for transportation
damages
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
6 7
12
19
20
25
26
24
23
27
29
30
111
9
10
2 6
3
22
17
16
28
4
5
78
13
15
14
21
18
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
8 9
5. General safety warnings
WARNING. Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work area safety
a). Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b). Do not operate power tools in explosive atmospheres, such as in
Power tools create
sparks which may ignite the dust or fumes.
c). Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
4. Description of symbols
The instruction manual, rating plate, or on the product itself, may show
these symbols. These represent important information about the product
or instructions on its use.
Caution/Warning:
Read all safety warnings and all instructions.
Regulatory Compliance Mark. Appliance complies with
requirements of electrical approval & EMC in Australia.
Waste electrical products should not
be disposed of with household waste.
Read the instruction manual.
Wear eye protection.
Wear ear protection.
Wear breathing protection.
60 Month Warranty Period.
2) Electrical safety
a). Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching outlets will reduce
risk of electric shock.
b). Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c). Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d). Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
Wear protective gloves when handling the saw blade.
The blade has sharp edges.
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
10 11
WARNING. Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
d). Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e). Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
3) Personal safety
a). Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
A moment of
inattention while operating power tools may result in serious personal
injury.
b). Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c).
position before connecting to power source and/or battery pack,
picking up or carrying the tool.
on the switch or energising power tools that have the switch on invites
accidents.
e). When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f). If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
f ). Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g). If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
h). Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mainsoperated (corded)
power tool or battery-operated (cordless) power tool.
4) Power tool use and care
a). Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b).
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c). Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d). Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e). Maintain power tools and accessories. Check for misalignment or
binding of moving
power tool’s operation. If damaged, have the
power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f ). Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g). Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
12 13
Additional safety rules for circular saws
WARNING! The warnings, precautions, and instructions discussed in
this manual cannot cover all possible conditions and situations that
may occur.
The operator must understand that common sense and caution are factors
which cannot be built into this product, but must be supplied by the
operator.
c. Adjust the cutting depth to the thickness of the workpiece. Less than
a full tooth of the blade teeth should be visible below the workpiece.
DANGER
a. Keep hands away from cutting area and the blade.
If both hands are holding the saw, they cannot be cut by the blade.
b. Do not reach underneath the workpiece. The guard cannot protect you
from the blade below the workpiece.
h). Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe
handling and control of the tool in unexpected situations.
5) Battery tool use and care
a). Recharge only with the charger specied by the manufacturer.
A charger
that is suitable for one type of battery pack may create a risk of re when
used with another battery pack.
b). Use power tools only with specically designated battery packs.
Use of
any other battery packs may create a risk of injury and re.
c). When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection from one terminal to another.
Shorting the
battery terminals together may cause burns or a re.
d). Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, ush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
e). Do not use a battery pack or tool that is damaged or modied.
Damaged
or modied batteries may exhibit unpredictable behaviour resulting in re,
explosion or risk of injury.
f). Do not expose a battery pack or tool to re or excessive temperature.
Exposure to re or temperature above 130 °C may cause explosion.
g). Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specied in the instructions.
Charging improperly or at temperatures outside the specied range may
damage the battery and increase the risk of re.
6) Service
a). Have your power tool serviced by a qualied repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
b). Never service damaged battery packs.
Service of battery packs should
only be performed by the manufacturer or authorized service providers.
f. When ripping always use a rip fence or straight edge guide. This
improves the accuracy of cut and reduces the chance of blade binding.
g. Always use blades with correct size and shape (diamond versus
round) of arbour holes. Blades that do not match the mounting
hardware of the saw will run o-centre, causing loss of control.
h. Never use damaged or incorrect blade washers or bolt. The blade
washers and bolt were specially designed for your saw, for optimum
performance and safety of operation.
d.
Never hold the workpiece in your hands or across your leg while cutting.
Secure the workpiece to a stable platform. It is important to support the
work properly to minimise body exposure, blade binding, or loss of control.
e.
Hold the power tool by insulated gripping surfaces, only when
performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live" wire will also make exposed
metal parts of the power tool "live" and could give the operator an electric shock.
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
14 15
e. Do not use dull or damaged blades. Unsharpened or improperly set
blades produce narrow kerf causing excessive friction, blade binding and
kickback.
f. Blade depth and bevel adjusting locking levers must be tight and
secure before making cut. If blade adjustment shifts while cutting, it
may cause binding and kickback.
g.
Use extra caution when sawing into existing walls or other blind areas.
The protruding blade may cut objects that can cause
kickback.
The protruding blade may cut objects that can cause kickback.
a. Check lower guard for proper closing before each use. Do not operate the
saw if lower guard does not move freely and close instantly. Never clamp or tie
the lower guard into the open position. If saw is accidentally dropped, lower
guard may be bent. Raise the lower guard with the retracting handle and make
sure it moves freely and does not touch the blade or any other part, in all angles
and depths of cut.
b. Check the operation of the lower guard spring. If the guard and the spring
are not operating properly, they must be serviced before use. Lower guard may
operate sluggishly due to damaged parts, gummy deposits, or a build-up of
debris.
c. Lower guard should be retracted manually only for special cuts such as
“plunge cuts” and “compound cuts.” Raise lower guard by retracting handle
and as soon as blade enters the material, the lower guard must be released.
For all other sawing, the lower guard should operate automatically.
d. Always observe that the lower guard is covering the blade before placing
An unprotected, coasting blade will cause the
saw to walk backwards, cutting whatever is in its path. Be aware of the time it
takes for the blade to stop after switch is released.
e. Do not use abrasive wheels.
Wear eye protection
Wear ear protection
Wear breathing protection
d. Support large panels to minimise the risk of blade pinching and
kickback. Large panels tend to sag under their own weight. Supports
must be placed under the panel on both sides, near the line of cut and
near the edge of the panel.
a.
arms to resist kickback forces. Position your body to either side of the
blade, but not in line with the blade. Kickback could cause the saw to
jump backwards, but kickback forces can be controlled by the operator,
if proper precautions are taken.
b. When blade is binding, or when interrupting a cut for any reason,
release the trigger and hold the saw motionless in the material until
the blade comes to a complete stop. Never attempt to remove the saw
from the work or pull the saw backward while the blade is in motion or
kickback may occur. Investigate and take corrective actions to eliminate
the cause of blade binding.
c. When restarting a saw in the workpiece, centre the saw blade in the
kerf so that the saw teeth are not engaged into the material.
If a saw blade is binds, it may walk up or kickback from the workpiece as
the saw is restarted.
Causes and operator prevention of kickback:
• Kickback is a sudden reaction to a pinched, bound or misaligned saw
blade, causing an uncontrolled saw to lift up and out of the workpiece
toward the operator.
• When the blade is pinched or bound tightly by the kerf closing down, the
blade stalls and the motor reaction drives the unit rapidly back toward the
operator.
• If the blade becomes twisted or misal
igned in the cut, the teeth at the
back edge of the blade can dig into the top surface of the wood causing
the blade to climb out of the kerf and jump back toward the operator.
Kickback is the result of saw misuse and/or incorrect operating procedures
or conditions and can be avoided by taking proper precautions as given
below.
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
16 17
6. Safety notes for battery/charger.
a. Keep the charger away from rain or damp conditions. Water entering
into the charger will increase the risk of an electrical shock.
b. Only use chargers recommended by the manufacturer to recharge
the battery. There is a risk of re if it is used with other batteries.
c. Never use to recharge third-party batteries. The charger is only
designed to charge the supplied batteries (Li-Ion) using the voltages
specied in the Technical Data. Otherwise there is a risk of re or
explosion.
d. Keep the charger clean. Contamination will increase the risk of an
electrical shock.
e. Check the charger, cable and plug each time you use the unit. Do
not use the charger if you nd any damage. Never open the charger up
yourself, have it repaired by a qualied specialist only and with original
replacement parts. A damaged charger, cable or plug will increase the
risk of an electrical shock.
f. Never operate the charger on a surface that will burn easily (for
example, paper, textiles etc) or in a ammable environment. There
is a risk of re occurring as a result of the heat generated during the
charging process.
g. Fluid can escape from the battery when used incorrectly. Avoid all
contact with this. In the event of accidental contact, rinse with water. If
liquid should get into the eyes, get medical assistance. Battery uid may
result in skin irritations and burns.
h. Do not open the battery. There is a risk of short-circuiting.
i. Protect the battery from heat, for example, from constant sun and
re. There is a risk of explosion.
j. Never short circuit the battery. There is a risk of explosion.
k. In the event of damage and incorrect use, vapours may come out of
the battery. Ensure your work space is well ventilated with fresh air and,
if you have any symptoms, consult a doctor. These vapours may irritate
the respiratory system.
7. Additional safety rules for charger & batteries
B Use only compatible ALDI Xfinity 20V charger and batteries with this
$JSDVMBS4BX(not supplied).
C Protect the charger and battery pack against moisture includingrain
and high humidity.
D Always check that the power cord is correctly connected before
using the charger.
E When you are not using the charger, remove the plug from the mains
socket. Do not pull the plug out by the power cord.
F Handle the battery pack carefully. Do not let it fall or be subject to
impact.
G Always remove the plug from the power socket before you clean or
maintain the charger or battery pack.
H Do not charge the battery pack if the ambient temperature is less
than 0°C or greater than 45°C.
I Do not short circuit the battery pack. A short circuit gives rise to
a heavy current causing overheating and the possibility of fire or
explosion.
J Do not connect a cable to the battery pack terminals.
K Make sure that no metal objects such as a nail, paper clip or coin
finds its way into the charging socket.
L A damaged battery pack or one which no longer holds its charge
must be disposed of in a special way and not placed for normal
household rubbish collection.
M Never throw a battery pack into a fire or into water.
N Keep handles dry, clean and free from oil and grease. Slippery
handles do not allow for safe handling and control of the tool in
unexpected situations.
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
18 19
NOTE: This unit may not be used by people (including children) with
reduced physical, sensory or mental capacities, with a lack of experience and
without the appropriate knowledge, unless they are supervised by someone
who is responsible for their safety or have been instructed by such a person
with regard to how the unit is to be operated. Children should be supervised
to ensure that they do not play with the device.
8. Important information – Product care
Customer Service of the manufacturer as listed on the battery / charger
packaging, manual or on the label on the battery / charger.
This Circular Saw uses Lithium Ion Battery Cells. Care MUST be taken to
ensure both the safety and life of the pack is maintained. Ensure you have
read all of the safety notes in the previous pages before using the
Circular Saw .
Treat the battery pack with care and within the guidelines of this manual
Battery/s.
subject to a severe drop or it does not operate within the guidelines of this
Batteries, immediately STOP using the battery pack and have it checked.
9. Assembly
This circular saw comes fully assembled and only requires attachment of the
battery pack (27)* before use. (*Battery not included).
Fitting and removing the Battery Pack from the Circular saw and Charger.
product; it is shown only for illustrative and instructional purposes only)
1.
align the grooved guide rails of the battery pack (27) with the raised guide
position until the battery is secure. When it is secured you will hear it engage
with a snap / click (Fig A).
2. To remove the battery pack (27) press the battery pack release button (28) and
slide the battery pack (27) completely out and away from the circular saw
(Fig B).
3.
(29), align the grooved guide rails of the battery pack (27) with the raised guide
rails on the charger (29). When the battery is secured you will hear it engage
with a snap / click.
4. To remove the battery pack (27) from the charger (30), press the battery release
button (29) on the battery pack (27) and slide away from the charger (29) in the
reverse direction it was installed (Fig C).
NOTE:
/ charger, contact the Customer Service of the manufacturer as listed on the
battery / charger packaging, manual or on the label on the battery / charger.
A. B. C.
INSTALL
REMOVE
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
20 21
10. Operation
Adjusting the Cutting Depth
WARNING:
battery (27) is removed before making any adjustments.
1. Ensure that the saw is facing away from you.
2. Loosen the depth locking lever (18) (Fig D).
3.
body of the saw until the blade is at the right depth (Fig E). Use the depth of
cut indicator (19) to determine the cutting depth.
4. Tighten the depth locking lever (18).
NOTE: Always use the correct blade depth setting. The correct blade depth
setting for all cuts should not be more than (6.35mm) 1/4” below the material
being cut. Allowing more depth will increase the chance of kickback and result
in a rough cut.
D.
H.
F.
E.
I. J.
G.
2. Loosen the bevel adjustment knob (9) located at the front of the base plate (15)
(Fig G).
3. Tilt the body of the saw until the required angle is reached using the bevel scale
(10) as a guide (Fig H).
4. Tighten the bevel adjustment knob (9) to secure the base plate (15) (Fig I).
NOTE: Always make a trial cut in a scrap piece of material along a guideline to
an accurate cut.
1. Attach the battery pack (27) to the circular saw.
2.
3. The blade will take approximately 2 seconds to reach full speed.
4.
re-engages to prevent accidental operation.
CAUTION: Allow the blade (21) to come to a complete standstill before setting
the saw down.
Adjusting the Bevel Angle
WARNING:
is removed before making any adjustments.
1. The circular saw can be adjusted to cut at any angle between 0° and 50°. When
making 45° bevel cuts, there is a blade guide notch (22) on the circular saw
base to help you line up the blade with the line of cut (Fig F). Align your line
of cut with the inner blade guide notch on the base of the circular saw when
making 45° bevel cuts.
TIGHTEN
LOOSEN
2
1
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
22 23
Making a cut
1. Mark the line of cut on your work piece.
2. Adjust the depth of cut and bevel angle as required per previous instructions.
3. When making 90° cross or rip cuts, align your line of cut with the outer blade
guide notch (22) on the base plate (15) of the saw (Fig O).
4. When making 45° bevel cuts, align your line of cut with the inner blade guide
notch on the base plate (15) of the saw.
5. Rest the front edge of the base on the work piece (Fig P).
6.
switch (4).
NOTE: Always let the blade reach full speed (approximately 2 seconds) before
you begin to cut into the work piece.
7. Slowly push the circular saw forward using both hands (Fig Q).
8. When making a cut always use steady, even pressure.
Forcing the circular saw causes rough cuts and could shorten the life of the
circular saw or cause kickback. Allow the blade and the circular saw to do the
work.
9. After completing your cut, release the trigger switch and allow the blade to
come to a complete stop.
Do not remove the saw from the work piece while the blade is moving.
NOTE: Since blade thickness varies, always make a trial cut in scrap material
along the guideline to determine how much, if any, the guideline must be
Using the LED Light
1. When the circular saw is switched on (the trigger switch (4) is depressed) , the
LED light (1) also comes on to ensure better vision and to make working in dark
areas more safe (Fig K).
The LED light (1) goes out when the trigger switch (4) is released.
CAUTION! LED is laser class 1!
Do not look directly into the laser as this may result in damage to the eyes.
Using the Parallel Guide
The parallel guide (12) allows you to make parallel cuts in a sheet of wood, all at
the same width.
WARNING:
battery (27) is removed before making any adjustments.
1. Loosen the parallel guide locking knob (11) (Fig L).
2. Slide the parallel guide (12) through the parallel guide slots (23) in the base
plate (15) (Fig M).
3. Adjust the parallel guide to the required width
and secure it in position with the parallel guide
locking knob (11).
4. Ensure that the parallel guide rests against the
wood along its entire length to give a consistent
parallel cut (Fig N).
L. M. P.N. Q.
K.
ANTI-CLOCKWISE
Q.
O.
BLADE GUIDE NOTCH
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
25
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
24
Circular Saw Cutting Tips
Always hold the main handle (7) with one hand and the front handle (8) with the
Never force the circular saw. Use continuous and light pressure. If cutting is
and squeeze the trigger switch (4). Allow the blade (21) to reach full speed,
re-enter the cut slowly and resume with cutting.
of the wood may have a tendency to tear and lift. Pushing the saw slowly will
Changing the Blade
WARNING:
the battery (27) is removed before making any adjustments.
1. P
2. Rotate the saw blade (21) by hand whilst depressing the spindle lock
button (20) until the blade locks (Fig S).
3. Whilst depressing the spindle lock button (20), turn the blade bolt
anti-clockwise using the supplied allen key (2) (Fig T).
4. R
5. Raise the lower blade guard (14) using the blade guard lever (13).
6. R
and away from the circular saw (Fig U)
NOTE: We recommend wearing gloves when removing the blade (21).
7. Clean the sa
will touch the blade.
Making a Pocket Cut
1. Adjust the depth of cut as required per previous instructions
2. Adjust the bevel setting to 0°.
3. R
so the blade (21) does not touch the work piece (Fig R).
4. With the blade (21) just clearing the work piece, start the motor by depressing
5. Always let the blade reach full speed (approximately 2 seconds) before you
begin to cut into the work piece.
6. Slowly lower the circular saw into the work piece, using the front of the base
resting on the work piece as a hinge point.
WARNING. As soon as the blade starts cutting the material, release the
lower blade guard lever (13).
7. Onc
forward direction to the end of the cut.
8. After completing your cut, release the trigger switch (4) and allow the blade (21)
to come to a complete stop.
Do not remove the circular saw from the work piece while the blade (21) is
moving.
NOTE: If the corners of your pocket cut are not
completely cut through, use a jigsaw or hand saw
.
R.
inner blade ange
Dust extraction outlet / adapter
1. A vacuum or dust extraction appliance can be tted to the dust
extraction adapter (17) by inserting the hose into the port of the dust
extraction adapter (17). Ensure the t is secure.
2. To remove the dust extraction adapter (17), loosen the assembly screw
using a philips head screwdriver (not supplied) in an anticlockwise
direction. Remove the screw, and pull the dust extraction adapter (17)
out and away from the saw (Fig Y Z).
3. To re-attach, place the dust extraction adaptor (17) over and around
the dust extraction port recess area, lining up the screw hole on the
adapter and the hole on the recess. Insert the assembly screw and
tighten in a clockwise direction using a philips head screwdriver (not
supplied). Ensure the t is secure.
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
26 27
8. Mount the new saw blade onto the spindle (30) and against the inner
blade ange
9. R
tighten the blade bolt (24) using the supplied allen key (2) in a clock wise
direction (Fig W).
WARNING: The direction in which the blade rotates has to be
the same as the direction per the blade rotation indicator (3)
(Fig X).
10. Ensure that the spindle lock button (20) is released.
11. Before using the saw again, check that the safety devices are in good
working order.
IMPORTANT. After replacing the saw blade (21), make sure that the
saw blade (21) runs freely by turning the blade by hand.
12. Attach the battery pack (27) to the circular saw and run the saw under
no load to
check that it runs smoothly before using it to cut any material.
V.
S.
W.
T.
X.
U.
Y. Z.
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
Battery Maintenance
To maintain battery capacity, always refer to the specic instructions in the
supplied manual included with the purchase of ALDI 20V Xnity Batteries.
It is recommended to recharge your battery every two months. Store only
fully charged batteries. They should therefore be recharged from time to
time. The place of storage must be dry.
CAUTION. Electrical and battery operated units that no longer work
should not be disposed of in the household waste! They are to be collected
separately, in accordance with your local waste disposal regulations.
ATTENTION! Batteries must be removed from battery powered tools
and disposed of separately in accordance with relevant waste battery
regulations.
Batteries must never be disposed of with domestic waste!
Discard power tools that are no longer usable at a local collection point.
Collection and disposal of packaging materials separately by types
complying with local rules and regulations. For details, please contact your
local council.
Storage & Transporting
• When transporting the circular saw, always remove the CBUUFSZQBDL
fromthe saw.
• When not using the circular saw, store both the battery and the circular
saw in a clean, dry environment.
1. Maintenance
WARNING:
the battery (27) is removed before making any adjustments.
Cleaning
1. Keep the tool’s air vents unclogged and clean at all times.
2. Remove dust and dirt regularly. Cleaning is best done with a rag.
3. Re-lubricate all moving parts at regular intervals.
4. If the body of the saw needs cleaning, wipe it with a soft damp cloth.
A mild detergent can be used but nothing like alcohol, petrol or other
cleaning agent.
5. Never use caustic agents to clean plastic parts.
CAUTION. Do not use cleaning agents to clean the plastic parts of the
tool. A mild detergent on a damp cloth is recommended. Water must
never come into contact with the tool.
General inspection
over time.
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
What your 5 year warranty means
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of
as quickly as possible once it has been brought to our attention. In the
unlikely event of such an occurrence, or if you require any information
about the product please contact us via our after sales support services,
details of which can be found in this manual and on the product itself.
After Sales Support TEL: 1300 889 028
Service Support
If you have any issues with the operation of your product, please call us
on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com
Accessories and After Sales Parts
The following is available for purchase by visiting https://help.tools/ or
calling our customer service hotline on: 1300 889 028
1. 63350-BL: 184mm Blade
1. Warranty
Your new WORKZONE® TITANIUM 20V Li-Ion Cordless Brushless 184mm
Circular Saw will more than satisfy your expectations.
It has been manufactured under stringent WORKZONE® TITANIUM Quality
Standards to meet superior performance criteria.
You will nd your new 20V Li-Ion Cordless Brushless 184mm Circular Saw
easy and safe to operate, and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire instruction manual before
using your new WORKZONE® TITANIUM 20V Li-Ion Cordless Brushless
184mm Circular Saw . Take special care to heed the Cautions and Warnings.
Your WORKZONE® TITANIUM 20V Li-Ion Cordless Brushless 184mm Circular
Saw has many features that will make your job faster and easier. Safety,
performance, and dependability have been given top priority in the
development of this 20V Li-Ion Cordless Brushless 184mm Circular Saw,
making it easy to maintain and operate.
Use only WORKZONE® TITANIUM replacement parts for your product.
Non-conforming parts or modications made to parts will void your
warranty.
Environmental protection
Recycle unwanted materials instead of disposing of them as
waste. All tools, hoses and packaging should be sorted, taken to
the local recycling centre and disposed of in an environmentally
safe way.
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
1. Technical Specifications
Voltage:
No Load Speed:
Blade Diameter:
Blade Teeth:
Blade Arbour:
Blade – 8idth of cut:
.BY
4QFFEPGCMBEF
Max. $utting angle:
Max. %epth of cut at 90°:
Max. %epth of cut at 45°:
.BDIJOF8FJHIU
20Vd.c.
4500NJO
184mm
24 T
NN
1.6mm
50°
62mm
4mm
This 20V Li-Ion Cordless Brushless 184mm Circular Saw
complies
with the following Standards:
4BGFUZ *&$
*&$
"4/;4
"4/;4
&.$ &/
&/
LH
NJO
1. FAQ/Troubleshooting
Trouble Problem Suggested remedy
Circular Saw will
not start
Battery pack (2)* is flat. Recharge the battery pack (2)*
Burned out switch Contact Customer Service for further advice.
Faulty motor Contact Customer Service for further advice.
Blade does not
reach full speed
Tool is overheating Turn off the tool and let it cool down to room temperature.
Inspect and clean the ventilation slots.
During use, do not push as hard.
Poor cutting Blunt blade Replace or sharpen circular saw blade (21).
Vibration or
abnormal noise
Loose parts Check to see that all knobs and levers are securely
tightened including bevel adjustment knob (9), depth locking
lever (18) and parallel guide locking knob (11).
Blade vibrating Ensure that the blade bolt (24) is securely tightened.
Check for any missing teeth on the blade, and replace the
blade (21) if necessary.
Moving parts excessively
worn
Contact Customer Service for further advice.
* Battery and Charger not included with this product
For further inquiries or issues associated with your Circular Saw, call our
Customer Service on 1300 889 028 or email us at info.aldi@positecgroup.com
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. T
conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty Details
Unfortunately, from time to time, faulty products are manu factured which need to be returned to the Supplier
for repair.
Please be aware that if your product is capable of retaining us er-generated data (such as les stored on a computer
hard drive, telephone numbers stored on a mobile telephone, songs stored on a port able media player,
games saved on a games console or les stored on a USB memory s tick) during the process of repair,
some or all of your stored data may be lost.
We recommend you save this dat a elsewhere prior to sending the pr oduct for repair.
You should also be aware that rather than repairing goods, we may replace them with refurbished goods of
the same type or use refurbished p arts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they meet
Please call us on 1300 889 028 , or email us at JOGPBMEJ!QPTJUFDHSPVQDPN
Positec Australia Pty Limited, 10 Corporate Blvd, Bayswater Victoria, Australia 3153
Positec Help Desk 1300 889 028 (Operating Hours: Mon-Fri 9:00 AM to 5:00PM EST)
EMAIL: info.aldi@positecgroup.com
INTERNET: https://help.tools/
Repair and Refurbished Goods
or Parts Notice
Circular Saw 20V Circular Saw 20V
ALDI guarantees that our exclusive brand products are developed
store within 60 days from the date of purchase for a full refund
or replacement, or take advantage of our after sales support by
calling the supplier‘s Customer Service Hotline.
WORKZONE® TITANIUM is a registered trademark of ALDI Stores
Made in China
WORKZONE® TITANIUM is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 SARGENTS ROAD, MINCHINBURY NSW 2770
www.aldi.com.au
1x Circular Saw Skin
1 x
184mm Cutting Blade
1 x Parallel Guide
1 x Allen Key
1 x Dust Extraction
Adapter
1 x Instruction Manual
1 x Quick Start Guide
1 x Warranty Certicate
1300 889 028
info.aldi@positecgroup.com
MODEL: CS20V PRODUCT CODE: 63350 01/2019
Loading...