Workzone CDLID20 Instruction Manual

Xfinity Li-ION 20V

Instruction Manual

IMPORTANT

Read carefully before use

Keep for future reference

20V Li-Ion Cordless Auto
Buffer / Polisher

ODEL NUMBER CDLID20

Version number:

1300 889 028

[e-mail]

03/2019

63520CDLID20

2

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

Welcome

Congratulations in choosing to buy a Workzone® Titanium 20V Li-Ion
Cordless Auto Buffer / Polisher.

All products bought to you by Workzone® Titanium are manufactured
to the highest standards of performance and safety and, as part of
our philosophy of customer service and satisfaction, are backed by our
comprehensive 5 Year Warranty. We hope you will enjoy your purchase
for many years to come.

When you open your packaging, first remove all items and check there
are no parts damaged or missing. If you find anything wrong, do not
operate the product until the parts have been replaced or the fault has

been rectified. Failure to do so could result in serious personal injury.

1

1

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

Contents

Application

Package Contents

Parts description

Description of symbols

General safety warnings

Safety notes for battery/charger

Important information-Product care

Assembly

Operation

Maintenance, Storage and Cleaning

Warranty

Disposal and environmental protection

Accessories and After Sales parts

FAQ/Troubleshooting

Technical Specifications

2

2

4

5

7

12

14

15

17

21

21

22

23

24

25

2

2

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

1.Application

First time users or inexperienced operators pay particular attention
to the operation of the 20V Li-Ion Cordless Auto Buffer / Polisher,
including details of starting and stopping and correct use of the 20V
Li-Ion Cordless Auto Buffer / Polisher on pages 14-20, as well as the
maintenance instructions on pages 21.

Intended use of 20V Li-Ion Cordless Auto Buffer / Polisher
NOTE: This product is for private domestic DIY use only. It is not

suitable for commercial or trade use.
This 20V Li-Ion Cordless Auto Buffer / Polisher is used for polishing
and buffing cars, boats, recreational vehicles , floors and other coated
surfaces.

2.Package Contents

1 x Auto Buffer / Polisher
1 x 20V Li-Ion Battery
1 x 20V Charger Adapter
1 x Plug Pack Charger
1 x Polishing / Buffing Bonnet
1 x Terry Towel Bonnet
1 x Instruction Manual
1 x Warranty Card

• Remove all packing materials

• Ensure all parts on the contents list are present

• Check the appliance, and all accessories for transportation damages

WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your power tool

should only be passed on together with this instruction manual.

3

3

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

WARNING! To reduce risk of injury, only use the supplied battery

and charger OR any 20V Xfinity Plus battery pack or chargers.
Other type of battery packs may burst causing personal injury and
damage. The battery pack must be recharged only with the supplied
charger OR any 20V Xfinity Plus battery charger.
NOTE: This appliance (charger) must be used with a residual current
device with a rated residual current of 30mA or less.

4

4

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

3.Parts description

Plastic handle/s

On/Off switch

Battery pack release button

Battery pack

Foam pad base

Polishing / Buffing bonnet

Terry towel bonnet

Charger adaptor (SEE FIG. A)

Plug pack charger (SEE FIG. A)

3

4

1

2

1

5

6

7

9

8

7

5

2

6

3

4

1

5

5

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

4.Description of Symbolssymbols

To reduce the risk of injury, user must read instruction manual

Warning

Wear ear protection
Wear eye protection
Wear dust mask

Regulatory Compliance Mark. Appliance complies with
requirements of electrical approval & EMC in Australia.

For indoor use only (only for charger)

Do not charge the battery pack if the ambient temperature is
less then 0°C or greater than 45°C.

Li-Ion battery. This product has been marked with a symbol
relating to ‘separate collection’ for all battery packs and battery
pack. It will then be recycled or dismantled in order to reduce
the impact on the environment. Battery packs can be hazardous
for the environment and for human health since they contain
hazardous substances.

The instruction manual, rating plate, or on the product itself, may show
these symbols. These represent important information about the product or
instructions on its use.

max45 C

6

6

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

Do not crush, disassemble, short terminals or dispose in fire;
there is a risk of burns explosion or fire.

Do not put in water.

Positive terminal

Negative terminal

Double insulation (only for charger) There are two independent
barriers of insulation to protect you from the possibility of
electrical shock.

Polarity

Fuse

60 Months Warranty

MEPS

T2A

60

7

7

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

5. General safety warnings

General Power Tool Safety Warnings

WARNING Read all safety warnings , instructions,
illustrations and specifications provided with this power

tool.

Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.

1). Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

b) Do not operate power tools in explosive atmospheres, such

as in the presence of flammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

2). Electrical safety
a) Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away from

8

8

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for outdoor

use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable,

use a residual current device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.

3). Personal safety
a) Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while
you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying power

tools with your finger on the switch or energising power tools that
have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep

your hair and clothing away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

9

9

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

g) If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related

hazards.

h) Do not let familiarity gained from frequent use of tools

allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury within a

fraction of a second.

4). Power tool use and care
a) Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better and
safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on

and off. Any power tool that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or remove

the battery pack, if detachable, from the power tool before
making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are easier
to control.

10

10

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the

power tool for operations different from those intended could result
in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from

oil and grease. Slippery handles and grasping surfaces do not allow

for safe handling and control of the tool in unexpected situations.

5). Battery tool use and care
a) Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of battery

pack may create a risk of fire when used with another battery pack.

b) Use power tools only with specifically designated battery

packs. Use of any other battery packs may create a risk of injury and

fire.

c) When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together

may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.

e) Do not use a battery pack or tool that is damaged

or modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or risk of injury.

f) Do not expose a battery pack or tool to fire or excessive

temperature. Exposure to fire or temperature above 130 °C may

cause explosion.

g) Follow all charging instructions and do not charge the

battery pack or tool outside the temperature range specified

11

11

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

6. Safety notes for battery/charger

in the instructions. Charging improperly or at temperatures

outside the specified range may damage the battery and increase
the risk of fire.

6). Service
a) Have your power tool serviced by a qualified repair person

using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.

b) Never service damaged battery packs. Service of battery packs

should only be performed by the manufacturer or authorized service
providers.

Additional safety rules:

Always wear eye protection.
Always wear ear protection during extended periods of operation.
Always check walls and ceilings to avoid hidden power cables and
pipes. A metal detector can be obtained from any good DIY store for
this purpose.
Use the original accessories and the tool provided, no others.
Only use accessories in good condition. Do not use torn or worn
accessories.
Do not turn the machine on whilst any of the accessories are resting on
or inserted into the work piece or material that you want to work with.
Wait until the machine is up to full speed before proceeding with your
task.
Keep your hands away from cutting area. Do not reach under the
material being cut.
The operating instructions and the enclosed safety information should
be kept carefully for later use and enclosed with the machine, should it
be passed on or sold.

12

12

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

6. Safety notes for battery/charger

Safety Warnings for battery pack
a) Do not dismantle, open or shred cells or battery pack.
b) Do not short-circuit a battery pack. Do not store battery packs

haphazardly in a box or drawer where they may short-circuit
each other or be short-circuited by conductive materials.

When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small metal
objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.

c) Do not expose battery pack to heat or fire. Avoid storage in

direct sunlight.
d) Do not subject battery pack to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to

come into contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of water

and seek medical advice.
f) Seek medical advice immediately if a cell or battery pack has

been swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a clean dry cloth if they

become dirty.
i) Battery pack needs to be charged before use. Always refer to

this instruction and use the correct charging procedure.
j) Do not maintain battery pack on charge when not in use.
k) After extended periods of storage, it may be necessary to

charge and discharge the battery pack several times to obtain

maximum performance.
l) Battery pack gives its best performance when it is operated

at normal room temperature (20 °C ± 5 °C).
m)When disposing of battery packs, keep battery packs of

different electrochemical systems separate from each other.

13

13

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

n) Recharge only with the charger specified by ALDI. Do not use

any charger other than that specifically provided for use with
the equipment. A charger that is suitable for one type of battery

pack may create a risk of fire when used with another battery pack.

o) Do not use any battery pack which is not designed for

use with the equipment.The supplied battery pack or any
ALDI 20V Xfinity Plus battery can be used on this tool. The
supplied charger or any ALDI 20V Xfinity Plus charger can be

used on this tool.
p) Keep battery pack out of the reach of children.
q) Retain the original product literature for future reference.
r) Remove the battery from the equipment when not in use.
s) Dispose of properly.

General Safety Warnings for charger

WARNING Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

- Children should be supervised to ensure that they do not play with

the appliance. If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

Additional safety instructions for your Battery Charger

1. Before charging, read the instructions.

2. For charging Li-ion battery pack only.

3. Do not charge a leaking battery.

14

14

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

4. Do not use chargers for works other than those for which they are
designed.

5.

Before charging, ensure your charger is matching the local AC supply.

6. The charging device must be protected from moisture.

7. Do not use the charging device in the open.

8. Do not short out the contacts of battery or charger.

9. Respect the polarity “+/-“ when charging.

10.Do not open the unit and keep out of the reach of children.

11.Do not charge the batteries of other manufactures or ill-suited
models.

12.Ensure that the connection between the battery charger and battery
is correctly positioned and is not obstructed by foreign bodies.

13.Keep battery charger’s slots free of foreign objects and protect
against dirt and humidity. Store in a dry and frost-free place.

14.When charging batteries, ensure that the battery charger is in a
well-ventilated area and away from inflammable materials. Batteries
can get hot during charging. Do not overcharge any batteries.
Ensure that batteries and chargers are not left unsupervised during
charging.

15.Do not recharge non-rechargeable batteries, as they can overheat
and break.

16.Longer life and better performance can be obtained if the battery
pack is charged when the air temperature is between 18°C and 24°C.
Do not charge the battery pack in air temperatures below 4.5°C, or
above 40.5°C. This is important as it can prevent serious damage to
the battery pack.

17.The supplied charger or any ALDI 20V Xfinity Plus charger can be
used on this battery supplied with this tool. Do not use any other
chargers.

7. Important information – Product care

This product uses Lithium Ion Battery Cells. Care MUST be taken to
ensure both the safety and life of the pack is maintained. Ensure you

15

15

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

have read all of the safety notes in the previous pages before using the
Auto Buffer / Polisher.
Treat the battery pack with care and within the guidelines of this
manual.
If the battery pack does become immersed in water or any fluids, or is
subject to a severe drop or it does not operate within the guidelines
of this manual or the supplied manual of any ALDI 20V Xfinity Plus
batteries, immediately STOP using the battery pack and have it
checked.

8. Assembly

NOTE: Before using the tool, read the instruction book carefully.

Before putting into operation and charging your battery pack, note
not to use any charger other than that specifically provided for use
with the tool. This product is also compatible with any ALDI Xfinity Plus
20V Batteries or Chargers.
If the battery pack is very hot you must remove your battery pack
from the charger and allow time for the battery to cool down before
recharging.
Charge the battery to reach full before storage. If the tool will not be
used for long periods of time, charge the battery every 3 months.

8.1 Charging procedure (See Fig. A)

1) Plug the plug pack charger (9) into the mains power socket and turn
on. The light will be green to indicate there is
power to the plug pack charger (9).

2) Plug the lead from the plug pack charger (9)
into the back of the charger adaptor (8).

2) Slide the Battery pack (4) into the charger
adaptor (8) by aligning the guiding rails on the
battery pack (4) and the charger adaptor (8). A
click indicates the battery is fitted. Make sure
the battery is secured firmly. The light will turn

A

9

8

16

16

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

to red to indicate the charging process has started.

3) When charging is completed, the light will turn to green.

4) Once fully charged, unplug the charger adaptor (8) and plug pack
charger (9) and remove the battery pack (4).

NOTE: The power to the charger adaptor (8) / plug pack charger
(9) should be turned off when unattended.

8.2 Charging indicator

Light Status

Green ON

Plug pack charger (9) is plugged
into the mains power and turned
on, without the battery inserted.

Red ON

Charging

Red OFF
Green ON

Fully charged

8.3 To remove and install the battery pack (See Fig. B1)

1. Press the battery pack (4) release button (3) firmly, and then slide the

battery pack (4) upwards to remove the battery pack (4) (See Fig. B1).
After recharging, insert the battery pack (4) into the product battery
port. A simple push and slight pressure will be sufficient (See Fig. B2). A
click will indicate the battery pack (4) is secure.

B1

B2

17

17

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

9.Operation

9.1 Attaching the terry towel bonnet (7) to the foam pad base
(5) (See Fig. C1, C2)

1) Place the terry towel bonnet (7) over the foam pad base (5) as shown
in Fig. C1.

2) Always make sure that the elastic strip on the bottom of the bonnet
is securely tucked on the underside of the foam pad base (5).

9.2 Applying wax to terry towel bonnet (7)

IMPORTANT: DO NOT APPLY WAX DIRECTLY
ON CAR!
Applying paste wax to terry towel bonnet
(7) (See Fig. D)

1) Spread a heaped teaspoon of wax evenly over

the entire surface of the terry towel bonnet (7)
using a putty knife or any other flat object.

9.3 Applying liquid wax to terry towel bonnet (7) (See Fig. E)

1) Apply three swirls of wax over the terry towel bonnet (7) (See Fig. E).

2) This should be enough to cover 1/4 of a cars surface.

3) For the second and third and fourth applications, only use
approximately half as much as used on the first application. The

D

C1

C2

18

18

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

terry towel bonnet (7) will not absorb as much
wax on later applications.

9.4 Running your polisher and waxing a vehicle

1) To avoid splashing wax, always start and stop
the polisher against the surface to be polished.

2) Place the polisher against the vehicle and turn
the polisher ON by pressing the “I” on the On/
Off switch (2).

3) Apply wax in a straight line with either a side­to-side or back and forth motion.

Always use broad, even strokes when applying

wax (See Fig. F).

4) Start applying wax to the flat surfaces (hood,
trunk and roof) first. Wax one section at a time
(See Fig. G).

5). After flat surfaces are covered with wax, you
can do the sides.

6). Apply wax in a thin, even coat. Too much wax does not add any
more protection and only makes the wax removal more difficult.

7). The random orbit motion of the buffer / polisher provides an
application that cannot be duplicated, not even “by hand”.

IMPORTANT: Do not apply excessive pressure against the work surface
with the buffer / polisher. The random orbital motion feature on this

G

H

I

F

E

19

19

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

product will perform better when less pressure is applied. Applying
excessive pressure will slow the random orbital motion and reduce the
effectiveness of the product.

9.5 Attaching the polishing / buffing bonnet (6) to the foam pad
base(5) (See Fig. J)

WARNING: When changing accessories, BE SURE that the On/Off

switch (2) is in the OFF position and the battery pack (4) has been

removed.

1. Place the polishing / buffing bonnet (6) on to the foam pad base (5)
as shown in Fig. J1,J2.

2. Always make sure that the elastic strip on the bottom of the bonnet
is securely tucked on the underside of the foam pad base (5).

9.6 Polishing - removing the wax from the surface

NOTE: Remove wax in the same order in which it was applied.

1. Wait until wax has dried to an even haze on vehicle.

2. Turn the product On by pressing the “I” on the on/off switch (2).

3. Turn the product Off by pressing the “O” on the on /off switch (2)

IMPORTANT: Do not apply excessive pressure against the work surface
with this product.
The random orbital motion feature on this product will perform better

J1 J2

20

20

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

when less pressure is applied. Appling excessive pressure will slow the
random orbital motion and reduce the effectiveness of the buffer /
polisher.

NOTE: For best results, use long, sweeping strokes in a criss-cross
pattern when removing wax.

4. Buff and polish the entire surface until all dried wax is removed.
Remove the polishing / buffing bonnet (6) from time to time and
shake out the dried wax residue. A polishing / buffing bonnet (6)
with excess residue will cause streaking. You may need to replace
the polishing / buffing bonnet (6) with a new one if you can’t get it
clean enough to avoid streaking.

5. Use a clean terry towel bonnet (7) for final buffing and polishing, or
use the polishing / buffing bonnet (6) for the ultimate “showroom”
shine.

CAR CARE TIPS

1. Wash and polish the car 3 to 4 times a year to help ensure paint
protection.

2. Wash the car at least every 2 weeks with a car wash solution which
will not harm the finish or strip the wax. Avoid washing with
household detergents.

3. Wash with a clean sponge and dry with a terry cloth towel to help
prevent dirt from scratching the paint. Start on the top and work
down.

4. Remove bugs, bird droppings, tree sap and tar from the car’s surface
on a daily basis.

5. Always make sure that the car’s surface is cool before washing.

6. Avoid parking near sprinklers, because water spots are difficult to
remove.

7. Always keep glass cleaner chemicals away from painted surfaces.
Spray the cleaner onto a towel, not directly on the windows.

21

21

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

10.Maintenance, Storage and Cleaning

Warning! Always ensure that the product is switched off and the

battery pack (4) is removed before making any adjustment.

Your product requires no additional lubrication or maintenance.
There are no user serviceable parts in this product.
Never use water or chemical cleaners to clean this product. Wipe clean
with a dry cloth.
Always store your product in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust.

Battery Maintenance

To maintain battery capacity It is recommended to recharge your
battery every two months. Store only fully charged batteries. They
should therefore be recharged from time to time.
The place of storage must be dry.

CAUTION!

Electrical and battery operated units that no longer work
should not be disposed of in the household waste! They are to be collected
separately, in accordance with your local waste disposal regulations.
ATTENTION! Batteries must be removed from battery powered tools
and disposed of separately in accordance with relevant waste battery
regulations.

11.Warranty

Your new WORKZONE® TITANIUM 20V Li-Ion Cordless Buffer / Polisher
will more than satisfy your expectations.
It has been manufactured under stringent WORKZONE® TITANIUM
Quality Standards to meet superior performance criteria.
You will find your new 20V Li-Ion Cordless Buffer/ Polisher easy and
safe to operate, and, with proper care, it will give you many years of
dependable service.

22

22

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

CAUTION. Carefully read through this entire instruction manual before
using your new WORKZONE® TITANIUM 20V Li-Ion Cordless Buffer /
Polisher . Take special care to heed the Cautions and Warnings.
Your WORKZONE® TITANIUM 20V Li-Ion Cordless Buffer / Polisher
has many features that will make your job faster and easier. Safety,
performance, and dependability have been given top priority in the
development of this 20V Li-Ion Cordless Buffer / Polisher, making it easy
to maintain and operate.
Use only WORKZONE® TITANIUM replacement parts for your product.
Non-conforming parts or modifications made to parts will void your
warranty.

What your 5 year warranty means

Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course
of as quickly as possible once it has been brought to our attention.
In the unlikely event of such an occurrence, or if you require any
information about the product please contact us via our after sales
support services, details of which can be found in this manual and on
the product itself. After Sales Support TEL: [phone]

Service Support

If you have any issues with the operation of your product, please call us
on 1300 889 028 for advice, or email us at [e-mail]

12.Disposal and environmental protection

Recycle unwanted materials instead of disposing of them as waste.
All tools, hoses and packaging should be sorted, taken to the local
recycling centre and disposed of in an environmentally safe way.

Batteries must never be disposed of with domestic waste!

Please discard power tools no longer usable at a local collection point.

23

23

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

Collection and disposal of packaging materials separately by types
complying with local rules and regulations. For details, please contact
your local council.

13.Accessories and After Sales parts

The following is available for purchase by visiting https://help.tools/ or
calling our customer service hotline on: 1300 889 028

1. 63520-TTB: Terry
Towel bonnet

4. 63520-CH: 20V
Charger

2.

63520-PBB: Polishing
/ Buffing Bonnet

3. 63520-BAT: 20V
Lithium Ion Battery

24

24

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

14.FAQ/Troubleshooting

Working hints for your polisher

1). At all times, let the polisher do the work - do not force it or apply
excessive pressure to the polisher. Preferably, use a light circular
motion. Pressing too hard will slow down the machine’s movement and
affect the quality of the work.

2). The most common error, however, is applying too much wax. If pad
absorbs too much wax, it will not last as long, and polishing is more
difficult and takes longer.

3). If bonnet continually comes off the pad, try with a new bonnet.

4). If the wax seems difficult to buff, you may have used too much wax.

Troubleshooting

Problem Possible Cause Solution
The battery pack

(4) gets warm when
charging.

It’s a result of the
stepping down of the
chemical reactions
inside the batteries
during the charging
process.

It is normal.

The polisher does not
abrade surface

Bonnet is worn out. Replace the new

bonnet and try again.

For further inquiries or issues associated with your polisher , call
our Customer Service on 1300 889 028 or email us at info.aldi@
positecgroup.com

25

25

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

15.Technical Specifications

Voltage 20V d.c.
No load speed 3000/min
Pad size Ø240mm
Battery pack Li-ion
Battery capacity 2.0 Ah
Charger rated input 100-240V~50/60Hz, 15W
Charger rated output 22VDC, 370mA
Machine weight 2.04kg

This product complies with the following standards

Safety: EN 62841-1
EN 62841-2-4
AS/NZS 62841.1
AS/NZS 62841.2.4

EMC: EN55014-1
EN55014-2

26

26

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

20V Auto Buer / Polisher

The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. T

conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.

Warranty Details

REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

27

27

AFTER SALES SUPPORT

e-mail: [e-mail]

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

Unfortunately, from time to time, faulty products are manufactured which need to be returned to the Supplier
for repair.
Please be aware that if your product is capable of retaining user-generated data (such as

les stored on a computer
hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player,
games saved on a games console or

es stored on a USB memory stick) during the process of repair,

some or all of your stored data may be lost.

We recommend you save this data elsewhere prior to sending the product for repair.

You should also be aware that rather than repairing goods, we may replace them with refurbished goods of
the same type or use refurbished parts in the repair process.

Please be assured though, refurbished parts or replacements are only used where they meet

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint.

Repair and Refurbished Goods

or Parts Notice

Positec Australia Pty Limited, 10 Corporate Blvd, Bayswater Victoria, Australia 3153

Positec Help Desk 1300 889 028 (Operating Hours: Mon-Fri 09:00AM to 05:00PM EST)

EMAIL: [e-mail]

INTERNET: https://help.tools/

20V Auto Buer / Polisher

Please call us on 1300 889 028, or email us at [e-mail]

This is a blank page

This is a blank page

ALDI guarantees that our exclusive brand products are developed

store within 60 days from the date of purchase for a full refund

or replacement, or take advantage of our after sales support by

calling the supplier‘s Customer Service Hotline.

Made in China

DISTRIBUTED BY:

ALDI STORES

1 SARGENTS ROAD, MINCHINBURY NSW 2770

www.aldi.com.au

rademark of ALDI Stores

is a re

g

istered t

rademark of ALDI Stores

is a re

g

istered t

WORKZONE TITANIUM

®

WORKZONE TITANIUM

®

1300 889 028

[e-mail]

03/2019

63520CDLID20