•
Grinder/Sander
I
~ A
Product
Safety P
roducilon
tn.pect.d
CONTENTS:
Warranty
Repair and
Explanation
I.
11.
Ill.
IV.
V.
VI. Technical
VII.
VIII.
Introduction
Layout
Scope
Intended
Safety
Before
Operation
•••••••••••••••••••••••••••••••••••••••••••••••••••••••
of
regulations
starting
Detai Is
Refurbished
of
delivery
use
data
•••••••••••••••••••••••••••••••••••••••••••••••••••
••••••••••
the
symbols
..................................................
•••••••••••••••••••••••••••••••••••••••••••
••••••••••••••.••••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••••••••••••••••
the
equipment
••••••••••••••••••••••••••••••••••
Goods
or
Parts
on
the
equipment.
•••••••••••••••••••••••• ~ •••••
Notice
••••••••••••
•••••••••••••
07
08
09
10
11
11
12
13 - 18
18
19-
20
20 -
21
IX. Cleaning
X.
XI.
XII.
XIII.
Storage/Transport
Electrical
Disposal
Trouble
and
maintenance
connection
and
recycling
shooting
•••••••••••••••••••• ~ ••••••••••••
••••••••••••••••••• ~ ••••••••••••••••••••••
•••••••••••••••••••••••••••••••••••••••
•••••••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••••••••••••••
21
22
22 - 23
23
24
I
13
12
18
- - - -
-----
-------
1 2
3 4 5 6
d 13
17 16
6
15
14
I .
I Utilisation
8
18
12
13
~~
12
5
19
A
A
17
-
-----··-·------------------------------
Grinder/Sander
rj
-
-
-
'
ALDI
•
Warranty Details
The product
of
36 months from the date
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benefits conferred by this warranty are
the product that the consumer has under the Competition and Consumer Act 2010 and similar
state and territory laws.
Our goods come with guarantees that cannot
Law.
You
for any other reasonably foreseeable loss or damage.
repaired or replaced if the goods fail to
does not amount to a major failure.
is
guaranteed to be free from defects
of
purchase. Defects that occur within this warranty period,
in
are entitled to a replacement or refund for a major failure and for compensation
be
of acceptable quality and the failure
in
workmanship and parts for a period
addition to all rights and remedies
be
excluded under the Australian Consumer
You
are also entitled to have the goods
in
respect of
AFTER SALES SUPPORT
ti
@ 1300
855
831
i;;.
support@scheppach.com.au
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
3
YEAR
WARRANTY
~
-
-
( -
ALDI
Repair and Refurbished Goods
or Parts Notice
Unfortunately, from
to the Supplier for repair.
Please be aware that
stored on a computer hard drive, telephone nufllbers stored on a mobile telephone, songs
stored on a portable media player, games saved
memory stick) during the process
We recommend you save this data elsewhere prior to sending the product for repair.
You
should also
refurbished goods of the same type·or use refurbished parts
Please be assured though, refurbished parts or replacements are only used where they
meet ALDl's stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint Please telephone us
RossMac Pty. Ltd.
P.O.
Box 261, Essendon North, Victoria,
1300 855
support@scheppach.com.au
831
time.
to time, faulty products are manufactured which need to
if
your product is capable of retaining user-generated data (such as files
on
a games console or files stored
of
repair, some or all of your stored data may
be
aware that rather than repairing goods, we may replace them with
in
the repair process.
on
1300 855
3041
831
or write to
us
at:
be
be
returned
on
a USB
lost
AFTER SALES SUPPORT
it
@ 1300 855
831
i;;;J
support@scheppach.com.au
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
VEAR
'---"'
3
WARRANTY
of
BGS700
Explanation
the symbols on the equipment
Explanation of the symbols on the equipment
@
0
Read the operating instructions to reduce the risk
injury
of
Wear ear-muffs. The impact
to hearing.
Wear a breathing mask. Dust which is injurious to health
can be generat~d when working
materials. Never use the device to work on any materials
containing
asbE!"stos!
noise can cause damage
on
wood and other
of
Wear safety goggles. Sparks generated during working
or
splinters, chips and dust emitted by the device can
cause loss
& Attention!
& Caution!
& Warning!
These operating instructions provide places concerning
your safety which are marked with this indication
Failure to follow these instructions may cause light to
medium risk
Failure to follow these instructions may cause danger to
life
or
AFTER SALES SUPPORT
Ir@
1300 855
831
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
of
danger
sight.
of
injury
of
'
serious injuries
9
8 support@scheppach.com.au
@)
Introduction BGS700
I.
Introduction
Congratulations on choosing to buy a WORKZONE TITANIUM® product.
All products brought to you by WORKZONE TITANIUM® are manufactured to the
highest standards of performance and safety, as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 3 Year Warranty.
We hope you will enjoy using your purchase for many years to come.
Note:
is
According to the applicable product liability law the manufacturer of this device
or
in
liable for damages which arise on
• improper handling,
• non-compliance with the instructions for use,
• repairs
• installation and replacement
• improper use,
• failures of the electrical system due to the non-compliance with the electrical
specifications and the VOE 0100, DIN
by
third party, non authorised skilled workers,
of
connection with this device
non-original spare parts,
57113
I VOE
0113
regulations.
in
case of:
not
Recommendations:
Read the entire text of the operating instructions prior to the assembly and operation
of the device.
These operating instructions are intended to make it easier for you to get familiar
of
with your device and utilise its intended possibilities
The operating instructions contain important notes on how to work safely, properly
and economically with your machine and how to avoid dangers, save repair costs,
reduce downtime, and increase the reliability and working life
In
addition to the safety regulations contained herein, you must
of
with the applicable regulations
machine.
Put the operating instructions
humidity, and store them near the machine. The instructions must be read and
carefully observed by each operator prior to starting the work. Only persons who
have been trained
dangers and risks are allowed to use the machine. The required minimum age must
be
met.
In
addition to the safety notes contained
the special regulations of your country, the generally recognised technical rules for
the operation of wood working machines must
in
the use
your country with respect to the operation
in
a clear plastic folder to protect them from dirt and
of
the machine and have been informed on the related
in
the present operating instructions and
be
use.
observed.
of
the machine.
in
any case comply
of
the
10
i;;;.i
support@scheppach.com.au
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
AFTER SALES SUPPORT
iir
(lluv
1300 855
831
@
BGS700
II. Layout
Safety glass
1
Spark deflector
2
Spark deflector adjusting screw
3
Fastening screw Safety glass holder
4
5
Guard hood
6 Grinding wheel
7 Workpiece support star screw
8 Workpiece support
9 Grinding
10
Belt guidance adjustment screw
11
Clamp screw for the top belt
12
Fastening screw for side cover
13
Side cover
14
Mounting point
15
Foot
16
On/Off switch
Coolant reservoir
17
Fastening screw for workpiece support
18
I sanding belt
roll13r
Layout/Scope of delivery
Ill. Scope
Grinder/Sander
Instruction manual
Sanding disc
Sanding belt
Grinding wheel dresser
Waranty sticker
• Open the packaging and remove the device carefully.
• Remove the packaging material as well
(if available).
• Check that the delivery
• Check the device and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.
of
delivery
(1)
(1)
(1)
(1)
(1)
(1)
is
complete.
as
the packaging and transport bracing
& Attention!
The device and packaging materials are not toys!
Children must not
a risk
of
swallowing and suffocation!
be
allowed
to
play with plastic bags, film and small parts! There
is
AFTER SALES SUPPORT
'il
@J 1300
855
831
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
11
Q support@scheppach.com.au
@)
Intended use BGS700
IV.
Intended use
I
11
11
I
:I'
I I
I
I
I
I ,
i
I .
11
The grinder/sander is a combination device for the coarse and fine grinding/sanding
of metals, woods of all kinds and other materials using the appropriate grinding/
sanding wheel or belt.
The machine may only
suitable for it and comply with the characteristic data
The machine is allowed to be used only for its intended purpose! Even when the
is
equipment
factors. The following hazards may arise
tion and layout:
• Contact with the grinding wheel where it is not covered.
• Catapulting parts out
• Catapulting of workpieces and parts of workpieces.
• Damage to hearing if essential ear-muffs are not used.
• Harmful emissions
• The rotating parts of the device cannot be covered for functional reasons.
Therefore you must exercise care and hold the workpiece firmly to prevent it
slipping which could result
sanding belt.
used as prescribed it
be
used with grinding/sanding wheels
in
is
still impossible to eliminate certain residual risk
in
connection with the machine's construc-
of
damag'ed grinding wheels.
of
wood dust when used
in
your hands coming into contact with the grinding/
in
closed rooms.
or
belts which are
these instructions.
The equipment
is
deemed to be a case of misuse. The user/operator and not the manufacturer will
be
liable for any damage or injuries
Please note that our equipment has not been designed for use
or industrial applications. Our warranty will
commercial, trade or industrial businesses or for equivalent purposes.
is
allowed to be used only for its prescribed purpose. Any other use
of
any kind resulting from such misuse.
in
commercial, trade
be
voided if the equipment
' '
is
used
in
12
Q support@scheppach.com.au
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
AFTER SALES SUPPORT
if
0u1J
1300 855
831
@)
BGS700
V.
Safety regulations
Safety regulations
& Caution!
Read all safety regulations and instructions. Any errors made
regulations and instructions may result
Keep all safety regulations and instructions
& Warning!
safety precautions must be observed when using power tools.
Read and follow these instructions before using the equipment and keep the safety
information
1.
Keep work area clean
• Cluttered areas and benches invite injuries.
2. Consider work area environment
• Don't expose power tools
tions. Keep work area well lit. Don't use power tools
liquids or gases.
3. Guard against electric shock
• Prevent body contact with grounded surfaces (e.g. pipes, radiators, ranges
refrigerators).
4.
Keep children away
• Do not allow other persons
from your work area.
5.
Store idle tools
• When not
the reach
6. Don't force tool
• It will do the job better and safer at the rate for which it was intended.
7.
Use right tool
• Don't force small tools or attachments to do the job
use tools for purposes not intended.
8. Dress properly
•
Do
Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.
9.
Use safety glasses
• Also use face or dust mask
10. Don't abuse cord
• Never carry tool by cord or yank it
from heat, oil and sharp edges.
To
protect against electric shock, injury and fire the following basic
in
a safe place.
to
to
is
use, tools should
of
children.
not wear loose clothing or jewellery. They can be caught
if
in
an
electric shock, fire and/or serious injury.
in
a safe place for future use.
rain. Don't use power tools
touch the equipment or cable, keep them away
be
stored
cutting operation
to
in
dry, high, or locked-up place, out of
is
dusty.
disconnect it from receptacle. Keep cord
in
following the safety
in
damp or wet loca-
in
presence of flammable
of
heavy duty tool. Don't
in
moving parts.
AFTER SALES SUPPORT
ir
~~
1300 855
831
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
ii;;!
support@scheppach.com.au
13
@)
Safety regulations
11.
Secure work
• Use clamps or a vice to hold work. It's safer than using your hand and it frees
both hands to operate tool.
12. Don't overreach
• Keep proper footing and balance
13.
Maintain tools with care
• Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically
and, if damaged, have repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean and
free from oil and grease.
14.
Disconnect tools
• When not in use, before servicing, and when changing accessories.
15.
Remove adjusting keys and wrenches
• Form the habit
ved from tool before turning it on.
of
checking to'see that keys and adjusting wrenches are remo-
at
all times.
16. Avoid unintentional starting
• Don't carry plugged-in tool with finger on switch. Be sure switch is
plugging in.
17.
Outdoor use extension cords
• When tool is used outdoors, use only extension cords intended for use outdoors and so marked.
18.
Stay alert
• Watch what you are doing. Use common sense. Do not operate tool when you
are tired.
19.
Checkdamagedparts
• Before further use
be carefully checked to determine that it will operate properly and perform
its intended function.
parts, breakage
operation. A guard
red
or
replaced by an authorized service-center unless otherwise indicated
elsewhere
authorized service-center. Do not use tool
in
this instructions manual. Have defective switches replaced by an
of
the tool, a guard or other part that is damaged should
Check
of
parts, mounting, and any other conditions that may affect its
or
other part that is damaged'should be properly repai-
for alignment
of
moving parts, binding
if
switch does not turn it on and off.
off
of
20. & Warning!
• The use
operating instruction
21.
Have your tool repaired by
• This electric appliance is
of
electric appliances may be carried out only by experts otherwise it may
cause considerable danger for the user.
of
any other accessory
or
the catalog may present a
in
or
attachment other than recommended it this
ris.k
of
personal injury.
an
expert
accordance with the relevant safety rules repairing
BGS700
when
moving
14
Q support@scheppach.com.au
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
AFTER SALES SUPPORT
if
@ 1300 855
831
-,-
@
BGS700
Safety regulations
22. Connect the dust extraction device
• Wherever there are facilities for fitting a dust extraction system, make sure it
connected and used.
is
General safety regulations and accident prevention
It
is
essential that you read the safety regulations and operating instructions
entirety and follow the information contained therein
bility
of
an accident or potentially dangerous situation from occurring while working
with the machine.
• Always check the device, the mains cable and the plug before using the device.
is
in
Only operate the tool when it
any
way.
Damaged parts have
cian.
• Always pull the power plug out of the socket outlet before doing any work on the
machine, before changing tools and whenever the machine
To
•
• Keep the tools
prevent damage to the power cable, always lead the power cable away from
the rear of the machine.
in
a safe place and out of the reach
good working order and is not damaged
to
be replaced immediately by a qualified electri-
in
order to eliminate the possi-
is
not being used.
of
children.
in
their
in
Use
on
materials containing asbestos is prohibited.
Note the corresponding accident prevention regulation issued by the professional
in
associations
• Use only original replacement parts.
• Repairs may only
• The machine may exceed 91.5 dB at the workplace. The operator will require
noise protection measures and ear muffs if this
electric tool is measured
21,
part
• Ensure that you maintain a steady foothold. Avoid abnormal working postures.
•
Do
not expose your electric tool to rain. Nev~r use electric tools
locations or near flammable liquids or gases.
• Protect the mains cable from becoming damaged by oil, solvents and sharp
edges.
• Keep your work area tidy.
• Make sure that the switch
supply.
• Wear suitable work clothes. Never wear loose fitting clothes and jewellery. Wear
a hair net
• For your own safety, use only accessories and auxiliary equipment from the
manufacturer of your electric tool.
• Always wear safety goggles, protective gloves and ear-muffs while carrying out
grinding, brushing and cutting jobs.
your country.
be
carried out by a qualified electrician.
in
accordance with IEC 59 CO
NFS 31-031 (84/537/EEC).
is
turned off when connecting the tool to the power
if
you have long hair.
is
the case. The noise of this
11,
IEC 704, DIN 45635
in
damp or wet
AFTER SALES SUPPORT
if
C,.us)
1300 855
831
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
~
support@scheppach.com.au
15
I
I
@)
Safety regulations
• Check that the rotating speed shown on the wheel is equal to or higher than the
rated speed
• Make sure that the grinding wheel is
• Grinding wheels must be handled and stored with care
manufacturer's instructions. Examine the grinding wheel each time before using
it.
Never use grinding wheels which have parts broken off or are cracked or
any other way damaged.
• Be sure
speed at least as high as the speed indicated on the rating plate
tool.
• Check that grinding wheels are fitted
instructions.
• , Make sure that intermediate layers are used if they are supplied with and re-
quired
• Make sure that the grinding disk
to use the tool. Allow the machine
5 minutes. Stop the machine immediately if severe vibrations arise or any other
defects are noticed. If this should be the case, examine the machine to find the
cause.
• The electric tool must never
• Never use separate reducer sleeves
larger holes fit
• Take precautions to ensure that flying sparks do not cause any danger, e.g. that
they do not hit anyone or cause inflammable substances to ignite.
• Always wear safety goggles and ear-muffs; use other personal safety equipment
such as gloves,
for
of
rotation for the tool.
of
the correct size for the grinder.
in
accordance with the
to
use only grinding wheels and brushes which are marked with a
of
in
accordance with the manufacturer's
the grinding wheel.
is
correctly fitted and secured before you start
to,
run without load and
be
used without the guard hood supplied with
or
adapters to make grinding wheels with
on
the machine.
,an
apron and a helmet if necessary.
in
a safe position for
BGS700
in
the electric
it.
& The workpiece becomes hot during grinding.
Important! Risk of burns!
Let the workpiece cool down. The material may become glowing hot during the
grinding. On longer jobs, allow the workpiece
• Do not use coolant or,the like.
Special safety information
1 Before you use the grinder, carry out a ring test on the grinding wheels (perfect
grinding wheels emit a clear tone when hit lightly with e.g. a plastic hammer).
This also applies when you fit new grinding wheels {damage
essential to subject the machine to an unloaded test run
Leave the danger zone while the test
2 Use only grinding wheels which are marked with details
type
of
bonding agent used, dimensions and the permissible RPM.
16
Q support@scheppach.com.au
MODEL:BGS?OO PRODUCT CODE: 48274 02/2015
is
in
to
cool down occasionally.
in
of
at least 5 minutes.
progress.
of
the manufacturer, the
AFTER SALES SUPPORT
if@
transit). It is
1300 855
831
<§)
BGS700 Safety regulations
3 Grinding wheels must be stored
ture.
4 Use only the clamping flanges supplied with the equipment to mount the grind-
ing wheels.
5 Use only clamping flanges of identical size and identical shape to mount the
grinding wheels. The intermediate layers between the clamping flange and the
grinding wheel must be comprised of elastic materials, e.g. rubber, soft card-
board, etc.
6 Never enlarge a grinding wheels' mounting hole by subsequent drilling.
7 The workpiece supports and the top adjustable safety guards must always be
as
moved
8 Grinding wheels are not allowed to be used without the safety device. The fol-
lowing clearances must not be exceeded:
- Workpiece support/grinding wheel: max. 2 mm
- Safety guard/grinding wheel: max. 2
9 The guard holder, workpiece support and transparent guard must
fore the double grinder is used.
10 The power plug must
11
The max. circumferential speed
3.14 X n)
d = diameter of the grinding wheel
n = motor revolutions per minute
12
Max. permitted motor housing temperature: 80°C
13
Before starting work, firmly screw the grinder to the workbench by using the 2
mounting points on the base plate.
14
Adjust the spark deflector periodically
wheel. Please note that the distance between the spark deflector and the wheel
is
to be kept as small as possible and should
15
The grinding wheel must be replaced at the latest when the spark deflector and
the workpiece support can no longer be set a maximum distance
the grinding wheel.
16
Process only work pieces, which can be held
small work pieces will increase the risk injuries. Longer work pieces must be
supported by using a roller stand (optional equipment)
close
f (60 X 1000)
as
possible to the grinding wheel (max. 2
be
pulled out before changing the grinding wheel.
in
a dry place, ideally at a constant tempera-
mm
clearance).
mm
of
the dry grinding wheel is:
in
mm
in
.
be
fitted be-
23
mis mis=
order to compensate the wear of the
in
no case exceed 2 mm.
of 2 mm
in
position safely. Processing very
or
the like.
(d
x
from
Residual risks
Even if you use this electric power tool in accordance with instructions,
certain residual risks cannot be ruled out. The following hazards may arise
connection with the equipment's construction and layout:
• Lung damage
• Damage to hearing
• Health damage caused by hand-arm vibrations
prolonged period
if
no suitable protective dust mask is used.
if
no suitable ear protection is used.
if
the equipment is used over a
or
is not properly guided and maintained.
AFTER SALES SUPPORT
1i' @ 1300 855
831
J;;!
support@scheppach.com.au
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
in
17
@)
Tech.nical data
Keep
this
safety
information
in a safe place.
BGS?OO
VI. Technical data
dimensions
111
grinding
grinding
111
grinding
max.
circumferential
belt
speed
grinding
weight
drive
rated
voltage
power
idle
speed
Load factor:
A load factor of
the motor continuously at its nominal power level (230 W) for no longer than 30 minutes ON period. If you fail to observe this time limit the motor will overheat. During
the OFF period the motor will cool again to its starting temperature.
L x W x H
wheel
wheel
thickness
wheel
m/min
/sanding
kg 10.2
V/Hz 230/50
rating
n,
min·'
mm
mm
mm
hole
mm
speed
belt
82
30 min (intermittent periodic duty) means that you may operate
L x W
mis
mm
360 X 280 X 335
150
20
12.7
23
895
686 X 50
370W S2 30min
2850
Noise
Sound values were measured
Sound
Uncertainty
Sound
Uncertainty
Wear
The impact
Limit
pressure
power
level L A
K A
level
KwA
ear-muffs.
of
noise can cause damage to hearing.
the
noise
L,,A
to a minimum!
in
accordance with
82.3 dB(A)
3 dB
91.5 dB{A)
3 dB
EN
61029.
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
Do
•
not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance
when it
is
not
in
use.
off
• Wear protective gloves.
,,
_,
I
18
J;!
support@scheppach.com.au
AFTER SALES SUPPORT
if
@ 1300 855 831
MODEL:BGS?OO PRODUCT CODE: 48274 02/2015
'
@
BGS700
Before starting the equipment
VII. Before starting the equipment
Before you connect the equipment to the mains supply make sure that the data on
the rating plate are identical to the mains data.
Always pull the power plug before making adjustments to the equipment.
• The machine must be set up so that it stands firmly, i.e. it must be securely
or
screwed to a work bench
• The grinder should be fixed permanently at a suitable place. To attach the grin-
der
to a hard and flat surface, there are
tool
support
area is
• All covers and safety devices have to be properly fitted before the equipment is
switched on.
• It must be possible for the grinding wheel to run freely.
should be approximately at the height
in
front
of
the machine - keep it free
Assembling the spark deflector (Fig.1-3)
• Slide the spark deflector (2) under the guard hood (5). Screw the spark deflector
(2) to the guard hood (5) by using the spark deflector adjustment screw (3).
• Use the
washer
2).
• Adjust the spark deflector (2) using the spark deflector adjusting screw (3)
· that the distance between the
is as small as possible and certainly does not exceed 2 mm. (Fig.3)
• Adjust the spark deflector (2) periodically to compensate for
spark
to fix the spark deflector (2).
deflector adjustment screw (3) with the spring
similar.
dry
grinding wheel (6) and the
two
mounting points on the grinder. The
of
your
elbow. The working
of
obstacles.
washer
To
secure you will need a screwdriver (Fig.
spark
wear
and the
deflector (2)
on the wheel.
so
Fitting the workpiece supports (Fig. 1/4/5/6)
• Secure the workpiece supports (8) to the grinder/sander using the workpiece
support star screw (7) on belt side and the 2 fastening screws for workpiece
support (18) on grinding wheel (5) side.
Adjusting the workpiece supports (Fig.
• Adjust the workpiece supports (8) using the fastening screws
port (18) and the workpiece support star screw (?)so that the distance between
the
dry
grinding wheel (6)
supports (8) is as small as possible and certainly does not exceed 2 mm.
• Adjust the workpiece supports (8) periodically to compensate
dry
grinding wheel.
or
the grinding/sanding belt (9) and the workpiece
6)
for
workpiece sup-
for
wear
on the
AFTER SALES SUPPORT
19
fir
@ 1300 855
831
MODEL:BGS700
~ support@scheppach.com.au
PRODUCT
CODE: 48274 02/2015
I,
@
I
. I
Before starting the equipmenUOperation
:.i
11;1
'
Changing the grinding wheel (Figs. 1/7/8)
Loosen the 3 fastening screws for side cover
(13),
ver
turn anti-clockwise and take it
ant: the grinding/ sanding wheel
of
nut (Fig. 9/A)
the grinding/sanding belt roller
is
off
fastened with a lefthanded thread) by holding the
(12)
(Fig.
holding the grinding wheel side co-
7).
Slacken the nut (Fig. 8/A) (import-
on
the opposite side. Then remove
the flange (B) and replace the grinding wheel (6). The grinding wheel
with the help
of
a rag.
is
Mount the flange (B) on the shaft and screw on the nut (A) hand-tight (Fig.
To
tighten the nut (A), hold the grinding wheel
(Fig.
8).
(6)
with a rag and tighten the nut (A)
BGS700
mounted
8).
Changing the grinding/sanding belt (Fig. 1/10)
• Loosen the fastening screw for side cover
• Slacken the clamp screw for the top belt roller
• Push the top belt roller downwards and pull the grinding/sanding belt out
(12)
and remove the side cover
(11)
by a few turns.
(13).
off
the
rollers.
in
• Place the new grinding/sanding belt (9)
the center of the top and bottom roll-
ers and release the clamping top belt roller.
• Now tighten the clamp screw
for
the top belt roller
(11)
and fit the side safety
guard.
• With the belt guidance adjustment screw (10) on the side you can adjust the belt
run by turning. Precise adjustment
the belt run
is
best done by turning the
of
grinding/sanding belt by hand.
I
I .
I
&.
Attention!
After replacing the grinding wheel
or
sanding belt, all guards must be reassembled.
VIII. Operation
On/Off switch (16)
•
To
switch on the equipment set 'the On/Off switch
• Move the On/Off switch (16) to position O to switch
switching on, wait for the equipment to reach its maximum speed of rotation.
Only then should you begin with the grinding.
Grinding
• Place the workpiece onto the workpiece support (8) and slowly guide the
workpiece towards the grinding wheel (6) at the desired angle to the point where
workpiece and grinding wheel make contact.
• Move the workpiece slightly back and forth to produce an optimal grinding re-
sult. This way the grinding wheel (6) will be evenly worn. Allow the workpiece to
cool down occasionally.
(16)
to position
off
the equipment. After
1.
20
J;l support@scheppach.com.au
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
AFTER SALES SUPPORT
'if
@ 1300 855
831
@)
BGS700
Grinding/sanding with the belt
• Always hold the workpiece firmly during grinding/ sanding.
• Do not exert excessive pressure.
• The workpiece should be moved on the belt to prevent the paper wearing on
one side.
• Important! Pieces of wood should always be sanded with the grain to prevent
them splitting.
Using the grinding wheel dresser
The grinding wheel dresser is a tool for straightening
• Press lightly against grinding wheel - without creating sparks. Move the dresser
sideways over the entire width of wheel.
Operation/Cleaning and maintenance
of
grinding wheels.
& Attention! Always wear safety goggles.
& Attention!
If the grinding wheel or the grinding/sanding belt becomes jammed during operation,
please remove the workpiece until the tool reaches its top speed again.
IX. Cleaning and maintenance
Always pull out the mains power plug before starting any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor housing free
as far as possible. Wipe the equipment with a clean cloth
pressed air at low pressure.
• We recommend that you clean the device immediately each time you have
finished using
• Clean the equipment regularly with a moist cloth and some soft soap. Do not
use cleaning agents or solvents; these could attack the plastic parts
equipment. Ensure that no water can seep into the device.
Maintenance
There are no parts inside the equipment which require additional maintenance.
it.
or
of
dirt and dust
blow
it
with com-
of
the
AFTER SALES SUPPORT
'if
@ 1300 855
831
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
21
Q support@scheppach.com.au
<§)
:11
I,
Ii
·'
!
Storage/Transport/Electrical connection
X.
Storage/Transport
Store the equipment and accessories out
at above freezing temperature. The ideal storage temperature is between 5 and 30
~C.
Store the electric tool
Lt:..
Attention!
The appliance must unconditionally
ring transport.
The appliance can
Power cable, flexible lamp shaft etc. should not
XI. Electrical
The electrical
The
connection
Lt:..
Attention!
This
machine
rated residual
Unplug
be
connection
motor
complies
shall
current
in
its original packaging.
the
machine!
be
lifted on the left and right grinding wheel I belt sander cover.
installed
always be
of
with
30
mA
is
connected
the
supplied
or
of
children's reach
secured against falling or turning down du-
be
used for transport purpose.
and ready
applicable VDE and DIN
via a residual
less
to
avoid
electric
in
a dark and dry place
for
operation.
provisions.
current
shock.
device
BGS?OO
with
a
Lt:..
Attention!
The
power
tor
and a
which
and
ordinances.
Lt:..
Warning!
Check
rating label!
The
customer's
also
comply
Damaged
The insulation on electrical connection cables
This may have the following causes:
• Passage points, where connection cables are passed through windows or
doors.
• Kinks where the connection cable has been improperly fastened or routed.
• Places where the connection cables have been cut due
• Insulation damage due to being ripped out of the wall outlet.
• Cracks due to the insulation ageing.
supply
grounding
is
properly
the
voltage! The
with
electrical
cord
plug. The
installed
mains
these
connection
of
this
machine
plug
and
grounded
voltage
connection
regulations.
must
cable
has an
must
as well as the
be
comply
equipment-grounding
plugged
in
accordance
with
is
often damaged.
into
an
with
the
information
extension
to
being driven over.
conduc-
appropriate
all local
on
the
cable used
codes
must
outlet
22
Q
support@scheppach.com.au
MODEL:BGS?OO
PRODUCT
CODE: 48274 02/2015
AFTER SALES SUPPORT
1f@
1300 855
831
@)
BGS700
Such damaged electrical connection cables
tening due to the insulation damage.
Check the electrical connection cables for damage regularly. Make sure that the
connection cable does not hang on the power network during the inspection.
Electrical connection cables must comply with the applicable VOE and DIN provisions. Only use connection cables with the marking "V-90/5V-90 3 x 0.75 mm
The printing
of
the type designation on the connection cable
Electrical connection/Disposal and recycling
must
not be used and are life-threa-
2
".
is
mandatory.
XII. Disposal and recycling
The equipment
The raw materials
its accessories are made of various types of material, such as metal and plastic.
Never place defective equipment
be taken to a suitable collectibn center for proper"disposal. If you do not know the
whereabouts
is
supplied
in
this packaging can be reused or recycled. The equipment and
of
such a collection point, you should ask
in
packaging to prevent it from being damaged
in
your household refuse. The equipment should
in
transit.
in
your local council offices.
AFTER SALES SUPPORT
'if
@ 1300 855
831
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
J;;!
support@scheppach.com.au
23
@)
Trouble shooting
XIII. Trouble shooting
Problem Possible Cause
a)
ON/OFF switch damaged.
b)
Motor
doesn't start
Machine
gets slower
during work.
Sanding
belt comes
off the drive
pullevs.
ON/OFF cable damaged.
c)
ON/OFF relay damaged.
d) Fuse blown.
e)
Motor burnt.
Too much pressure put on the Reduce the pressure on the
workpiece.
Belt does not run straight.
BGS700
Action
a-d) Replace all damaged parts
before you use your machine again.
e)
Contact your local service
centre. Every attempt
out a repair, can be dangerous if it is not done by skilled
personnel.
'
workpiece.
Reset the track.
to
carry
The wood
gets burnt with grease.
during
sanding. piece.
a)
Sanding disc or belt covered
b)
Excessive pressure on work-
a)
Replace disc
b)
Reduce pressure
piece.
or
belt.
on
work-
24
Q support@scheppach.com.au
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
AFTER SALES SUPPORT
ii'
@ 1300 855 831
BGS700
AFTER SALES SUPPORT
1f
@ 1300 855
831
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
25
i;i, support@scheppach.com.au
BGS700
26
J;;;!
support@scheppach.com.au
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
AFTER SALES SUPPORT
if
@ 1300 855
831
®
11
43
31.
54
OJ
G)
C/J
--.J
0
0
31
45
46
63
11
16
10---.___1
65~14
l
41
38
.
11
56
59~.LJ)
~
.
17
66
31
~
'
61
"9
6
55
9
19
.....
llD
~
"'
0
,18
15
m -c
0 C
16
o
"C
OJ
r-:-
30
i
ffi
33
:::r
~
g
34
(1)
-u
;u "C
0 "C
~
0
:::r
0
C
(")
*'
)>
m
;;a
-I
.,,
3
f1:1
0 C
--; 0
(")
O ii,
.j>.
00
0
0
N
:i,!
01
N
.....
N
C/)
~
C/)
m
r.,
\!cl
ID
C/)
.....
C
g:
"ti
Q
"ti
co
0
g:
;;a
co
-I
~
ALDI guarantees that
our stringent quality specifications. If you are not entirely satisfied with this
product, please return it to your nearest ALDI store within 60 days from
our
exclusive brand products are developed to
the date
our after sales suppoft by calling the supplier's Customer Service Hotline.
Made
WORKZONE TITANIUM is a registered trademark
DISTRIBUTED
ALDI STORES
1 SARGENTS ROAD
MINCH
www.aldi.com.au
_A_FT_E_R_S_A_L_E_s_s_u_P_P_O_R_T~~~~~
if@
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
_______
of
purchase for a full refund or replacement,
in
China
BY:
IN
BURY NSW 2770
1300 855 831
,,__,,,_-.,
Q
support@scheppach.com.au
.. :™ ·w
••
i-
or
of
ALDI Stores
[\V~
w
take advantage of
3
YEAR
WARRANTY
Loading...