Work sharp E2P, E2 User Manual
ELECTRIC SHARPENING MANUAL SHARPENING
SHARPEN SCISSORS
Power on the sharpener.
1.
MODEL E2:
MODEL E2P:
2.
Set knife in sharpener.
KNIFE
Pull through slowly.
3.
Press
Press
Press
dull knives.
to sharpen knives.
restore extremely
1.
Insert blade into center slot.
With gentle downward pressure, slide the knife back
2.
and forth along the full length of the blade 10 times.
10X
KNIFE
REMOVING / CHANGING
ANGLE GUIDE
Remove the guide to sharpen scissors, change abrasives,
or attach the Pocket Knife Guide included with Model E2P.
Remove the guide. Set sharpener to lowest speed. Rest
blade on the scissor guide and pull thru slowly. Repeat 2-5
times per side.
SCISSOR
GUIDE
SLOWLY
SHARPEN SERRATIONS
SLOWLY
Repeat on the opposite side. Continue alternating sides
4.
until machine shuts off.
KNIFE KNIFE
SLIDE, LIFT
CHANGING ABRASIVES
First, remove the guide and open top
cover. Remove o-ring and unscrew
fastener holding abrasive in place.
Abrasives are reversible.
After each use, wipe the inside & outside
of your sharpener with a dry cloth to
remove any grinding dust that may have
accumulated.
1. Insert blade into center slot.
With gentle downward pressure, slide the knife back
2.
and forth along the full length of the blade 10 times.
10X
KNIFE
Loading...