Wolf CI304C Specification Sheet & Dimensions Guide
30" Contemporary Induction Cooktop
FEATURES
• Trimless design to match Wolf contem-
porary products.
• Can be mounted flush with countertop.
• Ceran glass-ceramic surface for scratch
resistance and easy cleaning.
• Induction elements heat iron and other
magnetic cookware instantly, while
cooktop surface stays cool.
• Cookware sensing—elements will not be
energized without an induction-compatible pan on the surface.
• Bridge zone connects two elements to
create a 8" x 17" cooking area.
• Wolf exclusive induction elements sense
pan size to focus power for optimum
performance.
• Boost mode boosts power by diverting
power from an adjacent element.
• Wolf exclusive melt setting for gentle
heat, and true simmer setting prevents
scorching.
• Touch controls display an intuitive
power scale for precise control.
• Indicators including boost mode,
illuminate on the control panel.
• Control panel lock.
• Independent timer up to 99 minutes.
MODEL
Contemporary CI304C
wolfappliance.com
INDUCTION COOKING
In induction cooking, the electricity flows
through a coil to produce a magnetic field
under the glass-ceramic surface. When an
induction-compatible pan is placed on the
cooktop, currents are induced in the pan
and instant heat is generated. Cookware
made of magnetic materials, such as cast
iron or magnetic stainless steel is required
for induction cooking.
Model CI304C
30" Contemporary Induction Cooktop
SIDE
NO
combus
El
Outsid
wolfappliance.com
SPECIFICATIONS
PRODUCT
Dimensions 30"W x 21/2"H x 21"D
Weight 49 lb
ELECTRICAL
Supply 3-wire, 240/208 VAC, 60 Hz
Service 40 amp circuit
Conduit 4' flexible
DIAMETER
Element 101/2", (2) 8", 6"
ELEMENT RATING W
Large 2600 / 3150 boost
Medium (2) 2100 / 3000 boost
Small 1400
Flush mount installations are intended for
granite, solid surface or stone countertop
surfaces only.
Specifications are subject to change without
notice. Visit wolfappliance.com/specs for the
most up-to-date information.
Dimensions may vary ±
1
/8" (3). Dimensions in
parentheses are millimeters unless otherwise
specified.
DIMENSIONS
30" (762)
11/4" (32)
INSTALLATION
7
/8"
(22) MAX
CONDUIT
7
/8"
(22)
COUNTERTOP
PROFILE
5
/16"
(8)
21"
(533)
21/2" (64)
211/8"
(537)
RECESS
19/16" (40) min
W
29" (737)
CUT-OUT WIDTH
A
301/8" (765)
RECESS
COUNTERTOP CUT-OUT
21/2" (64)
191/2"
(495)
21/2" (64)
13"
(330)
36" (914) min
FLOOR TO
COUNTERTOP
VIEW
TE: Shaded area above countertop indicates minimum clearance to combustible surfaces,
tible materials cannot be located within this area.
ectrical supply location only applies to installations with built-in oven.
e corner radius 7/16" (11).
©Wolf Appliance, Inc. all rights reserved. 9/2014
18"
(457)
(51)
2"
30"
(762)
31/2" (89)
FRONT VIEW
41/2" (114)
E
10" (254)
Loading...