Wolf AHP212 Parts List

CATALOG OF

REPLACEMENT PARTS

AHP AND VHP GAS HOTPLATES

MODELS

VHP212 VHP424 VHP636 VHP848

VHP636

AHP212 AHP424 AHP636 AHP848

For additional information on Vulcan or to locate an authorized parts and service provider in your area, visit our website at www.vulcanequipment.com

©ITW Food Equipment Group, LLC 3600 North Point Blvd. Baltimore, MA 21222

AHP636

RETAIN THIS MANUAL FOR FUTURE USE

FORM F-37127 (04-12)

AHP AND VHP GAS HOTPLATES REPLACEMENT PARTS

TABLE OF CONTENTS

INTRODUCTION…………………………………………………………………………………...….......

REVISION A AHP AND VHP MODELS ………………………………………….……………………. Exploded parts view of exterior components...………………….……..……………………….… Exploded parts views of gas train components…………………………………………………… Recommended spare parts……………………………….………………………………………….

REVISION B AHP AND VHP MODELS ………………………………………….……………………. Exploded parts view of exterior components...…….……………….…..……………………….… Exploded parts views of gas train components…………………………………………………… Recommended spare parts……………………………….………………………………………….

3 3 4 5

6 6 7 8

INTRODUCTION

The AHP and VHP model designation is shared by two design platforms that have the same basic dimensions; however many service parts for the two designs are not interchangeable. The first revision (A) was manufactured prior to January of 2012; the second revision (B) began manufacture in January of 2012. Revision A models produced before January of 2012 will have one pilot head at each burner on the standard, flat burner units. Revision B models produced beginning in January of 2012 will have one pilot head between every two burners with a flash tube for flame carry over on the standard, flat burner models. Revision A AHP and VHP models manufactured prior to January of 2012 will have a removable bullnose (see item 2 on page 3) and revision B models manufactured January 2012 to present will have a bullnose that is welded to the chassis assembly and cannot be removed. The images on the front cover represent revision B models manufactured January 2012 to present.

January 2012 was the start for revision B but some of the revision A models ran several months past this date including most step-up models.

- 2 -

AHP AND VHP GAS HOTPLATES REPLACEMENT PARTS

REVISION A AHP AND VHP MODELS

EXTERIOR COMPONENTS

ILLUSTRATION NO. PART NO. NAME OF PART AMOUNT

1.………..……… 00-720567-00000…..……. Grate, Double…...………………………….. ...……..AR

2...………….….. 00-498000-00012………... Bullnose(12”)...……………………………... ………….1 00-498000-00024………... Bullnose(24”)...……………………………... ………….1 00-498000-00036………... Bullnose(36”)...……………………………... ………….1 00-498000-00048………... Bullnose(48”)...……………………………... ………….1

3..………..…….. 00-498001-00012………... Panel, Front(12”)…………………………… ………….1 00-498001-00024………... Panel, Front(24”)…………………………… ………….1 00-498001-00036………... Panel, Front(36”)…………………………… ………….1 00-498001-00048………... Panel, Front(48”)…………………………… ………….1

4..………..…….. 00-719255-00012………... Knob, Wolf (Red)…………………………… ...……..AR

5..………..…….. 00-428300-00001………... Knob, Vulcan (Black)………………………. ...……..AR

6..………..…….. 00-788918-00000………... Tray, Crumb (212)…………………………. ………….1 00-788919-00000………... Tray, Crumb (424…………………………. ………….1 00-788920-00000………... Tray, Crumb (636)…………………………. ………….1 00-788921-00000………... Tray, Crumb (848)…………………………. ………….1

7..………..…….. 00-723532-00000………... Leg (6”– recessed mount leg design)….… ………….4

8..………..…….. 00-722559-00000………... Step-Up Grate (Front)……………………... ...……..AR

9..………..…….. 00-498008-0000A...……... Step-Up Frame………………………..……. ...……..AR

00-710503-00000………... Leg (4”– surface mount leg design)……… ………….4

- 3 -

+ 5 hidden pages