Wolf 810431, 810430, 810425, 810429, 810428 Installation

...
WOLF STAINLESS STEEL BACKSPLASH
INSTALLATION INSTRUCTIONS
Wolf Stainless Steel Backsplash Kit Contents:
QTY DESCRIPTION
1 Backsplash (see list) 4 #10x2''(51) Hex Head Screws
FOR MODEL NUMBERS:
38”(965) H BACKSPLASH 30”(762) WALL HOOD
38”(965) H BACKSPLASH 36”(914) WALL HOOD
42BAK (810427) 42”(1067) W x
38”(965) H BACKSPLASH 42”(1067) WALL HOOD
48BAK (810428) 48”(1219) W x
38”(965) H BACKSPLASH 48”(1219) WALL HOOD
54BAK (810429) 54”(1371) W x
38”(965) H BACKSPLASH 54”(1371) WALL HOOD
60BAK (810430) 60”(1524) W x
38”(965) H BACKSPLASH 60”(1524) WALL HOOD
66BAK (810431) 66”(1676) W x
38”(965) H BACKSPLASH 66”(1676) WALL HOOD
NOTE: The total height of the back­splash is 38”(965). The Wolf back­splash is designed to be installed under your Wolf Hood and extend behind your Wolf Cooking appliance.
IMPORTANT NOTE: There are no mounting holes along the top edge of the backsplash for cosmetic reasons. Additional support is required and a contact adhesive must be used. Consult your local building material supplier or hardware store for details on backsplash adhesive products.
Page 1 of 1 810884 / Rev A / March, 2007
INSTALLING BACKSPLASH:
1. Align top edge of backsplash with underside of hood. Allow maximum of 1/8”(3) clearance between the bottom edge of the hood and the top of the backsplash.
2. Carefully following the contact adhesive instructions, apply contact adhesive to the back side of the top edge of the back­splash. Then make sure the top edge of the back splash is level and mount the backsplash to the wall.
3. Make sure backsplash is level with the Wolf Hood before installing screws along bottom edge of backsplash (See Figure 1).
IMPORTANT NOTE: It may be neces­sary to pull Wolf Cooking appliance away from the wall to complete installation of backsplash bottom screws. As shown in figure 1.
Backsplash corners and edges are sharp and caution should be used when handling backsplash.
Figure 1
To p
Bottom
Loading...