Wolf 805092, 804666, 804667, 804665 Installation
Front Leg Extension Cover
Model Numbers
• LEGCOV/3.3 – 3-1/4" Front Leg
Extension Cover for all Dual Fuel
Ranges with side panel height of
35-7/8" to 36-1/4"
• LEGCOV/3.8 – 3-3/4" Front Leg
Extension Cover for all Dual Fuel
Ranges with side panel height of
36-3/8" to 36-7/8"
• LEGCOV/4.3 – 4-1/4" Front Leg
Extension Cover for all Dual Fuel
Ranges with side panel height of
37" to 37-1/2"
• LEGCOV/4.8 – 4-3/4" Front Leg
Extension Cover for all Dual Fuel
Ranges with side panel height of
37-5/8" to 38"
Kit Contains:
(3) Lower Leveling Leg Covers
All 30" and 36" Dual Fuel
Ranges require 2 Lower Leveling
Leg Covers. All 48" and 60" Dual
Fuel Ranges require 3 Lower
Leveling Leg Covers.
Remove Existing Lower Leg
Covers
Step 1:
Pull Dual Fuel Range away from wall
and unplug the unit.
BE SURE TO DISCONNECT
POWER TO THE DUAL FUEL
RANGE BEFORE INSTALLING
FRONT LEG EXTENSION COVER.
Step 2:
Tip Dual Fuel Range backward so
front legs are elevated off of the
ground.
BE SURE THAT UNIT IS
SUPPORTED ALONG BACK EDGE.
DO NOT ATTEMPT TO REMOVE
LOWER LEGS UNTIL UNIT IS
SECURE.
Step 3:
Push factory installed bottom cover
up to expose leg leveling bolt.
Step 4:
Unscrew leg leveling bolt and remove
lower cover. Discard lower cover.
Step 5:
Insert leg leveling bolt into replacement cover and screw the bolt with
the cover attached into the bottom
of the Range.
Step 6:
Repeat Steps 3-5 for all Range legs
(2 for 30" and 36" units, 3 for 48"
and 60" units).
Step 7:
Lower the Dual Fuel Range and
adjust height of each leveling leg
until Range is level.
Step 8:
Plug in unit and slide unit back to
original position.
Wolf Appliance Company, LLC • P.O. Box 44848 • Madison, WI 53744 • 800-332-9513 • www.wolfappliance.com
804629A 6/03
W OLF D UAL F UEL F RONT L EG E XTENSION C OVERS
I NSTALLATION I NSTRUCTIONS
Loading...