Wisco 695D Service Manual

WARMING AND MERCHANDIS ING CABINET

Above red graphics now
replace green graphics
shown in photo.

MODEL 695

(Single door unit shown)

Snack foods have to be hot and moist to be appealing. Cold won’t do... Dry won’t do.
Wisco’s model 695 Food Warmers and Displays will keep your snack foods hot and moist
with fresh-out-o f-the-oven flavor and eye appeal. That mea ns longer holding time with
less product loss. And that means more profits for you. Now - isn’t that appealing?

FEA TURES:

- “Ready to Go” pizza graphic panels on Model 695

- “Ready to Go” graphic panels on Model 695-S

- Indicator lights show when water tank is empty/full

- Glass panels and display floor remove for easy cleaning

- Adjustab le thermostat

- Temperatures from 80 deg. to above 150 deg. F

- 2 Door “self serve” option available

Model 695

- Rotating racks accommodate up to a 16” pizza

Model 695-S

- Includes (4) shelves

- Total height of adjustable shelf space: 21”

- Adjustable shelves accommodate up to a 14” pizza

- Ad ditional shelves a vailable (#0018630)

MODEL 695-S

(Single door unit shown)

ELECTRICAL DA TA:

- 120 volts, 12 amps, 1440 watts

- Best when operated on an individual branch circuit

- 6’ power cord length

DIMENSIONS:

695/695-S: 32”H x 18-1/2”W x 18-1/2”D

SHIPPING WEIGHT:

695/695-S: A ppro x. 95 lbs.
*UNITS MUST SHIP FREIGHT

FP140039-M
12-5-13

P.O. BOX #10
OREGON, WI 53575
PHONE: [phone]
FAX: [phone]
www .wiscoind.com

LIMITED WARRANTY:

Wisco Industries, Inc. expressly warrants the product will be free from defects in workmanship and materials for a period of
1 year from the date of shipment. WISCO DISCLAIMS AND EXCLUDES ANY AND ALL OTHER EXPRESS OR IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.

Buyer agrees that its SOLE AND EXCLUSIVE REMEDY against Wisco and Wisco’s SOLE AND EXCLUSIVE LIABILITY arising
out of any defect or nonconformity in the product shall be replacement/exchange of such nonconforming countertop food service
equipment at Wisco’s expense. No countertop food service equipment shall be returned without Wisco’s consent. IT IS AGREED
THAT WISCO’S MAXIMUM LIABILITY SHALL NOT IN ANY CASE EXCEED THE SALE PRICE FOR THE COUNTERTOP
EQUIPMENT CLAIMED TO BE DEFECTIVE OR NONCONFORMING.

INTRODUCTION

We congratulate you on your recent purchase of the Wisco 695 Food W armer and Displa y unit.
Our company has tremendous pride in presenting you with a dependable, top quality unit
that is designed to provide you with years of reliable service.

GENERAL

The 695 Display Warmer offers flexibility with its sophisticated environmental control system. It
provides superior conditions for holding a variety of foods by allowing you to match selectively
the precise temperature and humidity balance that is best for your product.

As a safety precaution we recommend all instructions and safety tips appearing in this manual
be reviewed prior to operation.

CONSTRUCTION

Wisco’s Display Warm er is constructed of 22 guage brushed stainless steel. The unit is equipped
with tempered glass sides, door panels, and either a rotating carousel or adjustable shelving.
Both the rotating carousel and adjustable shelves are chrome plated and are easily removable
for quick cleaning.

IMPORTANT: Read the following safety and operation instructions to avoid injury and to avoid
damage to equipment or property.

Plug unit into a properly grounded electrical outlet of the correct voltage, size and plug configuration for this unit. We recommend usage

!

on an individual branch circuit of at least 15 amps for best results. Failure to do so may result in decreased performance of the warmer.

Unplug unit from power source and allow to cool completely before performing any maintenance or cleaning.

!

Unit is not waterproof. Do Not submerge in water. Do not operate if unit has been submerged in water.

!

Exterior surfaces on unit may get hot. Use caution when touching these areas to avoid injury.

!

Only shatter resistant light bulbs which meet or exceed NSF Standards specifically designed for food holding units must be used.

!

Breakage of bulbs not specially coated could result in personal injury and/or food contamination.

This warmer is designed to maintain food product at or above the optimum temperature.
It is not designed or intended to heat up or cook food to the serving temperature. Product is
to be prepared to a temp erature of above 160 F before placing in the warmer.

TO REPLACE DISPLAY LIGHT:

Only shatter resistant light bulbs which meet or exceed NSF Standards specifically designed for food holding units must be used.

!

Breakage of bulbs not specially coated could result in personal injury and/or food contamination.

- Disconnect the power supply cord and wait until unit has completely cooled. Unscrew display light
and replace with a new specially coated bulb. Same style and wattage.

CLEANING INSTRUCTIONS:

Do not steam clean or use excessive water on unit to avoid personal injury or electrical shock.

!

Unplug unit from power source and allow to cool completely before performing any maintenance or cleaning.

!

Unit is not waterproof. Do Not submerge in water. Do not operate if unit has been submerged in water.

!

It is recommended that the interior and exterior surfaces be cleaned daily with a mild soap and damp cloth.
Stubborn stains on base of unit may be removed with a non-abrasive cleaner and damp cloth. Usage of
an abrasive cleanser could scratch or damage the finish of your unit.

TROUBLESHOOTING:

Unplug unit from power source and allow to cool completely before performing any maintenance or cleaning.

!

Unit not working:

- Check power switch position, power cord and/or electrical circuit.
Display Light not working:

- Tighten or replace bulb
Loud noise coming from the unit:

- Check to see that blower motor is functioning properly
Unit not heating properly:

- Has food been prepa red in advance and placed in warmer at proper serving temperature?

- Check heat settings. Is it at the correct setting for your food product?

- Turn unit on, open the door and verify that hot air is being blown into unit.
If not, your blower motor may not be functioning properly.

- If the air being blown in is not hot then the thermostat may not be functioning properly.

- If carousel is not turning: Drive motor may not be functioning or door
switch may not be functioning properly

If you have further questions in regards to this piece of equipment - please contact Wisco Industries, Inc.
directly at: [phone] or [phone]; fax [phone] for further information.
*Please be sure to have the complete model # and serial # available.