Wintop Electronics WM 610 User Manual

Quick Start Guide

Specifications

Dimensions(L x W x H):103*65*38mm Weight:60g

Buttons:3 Connector Type:USB

Sensor Type:Optical Model:AMR910

Connector DPI:1200

Device Features

1. Left button 4.Optical sensor

2.Scroll wheel 5.Battery cover

3.Right button

How to Use

1. Open the battery compartment cover at the bottom of the mouse;

remove USB receiver.

2. Insert two AAA batteries into the battery compartment.

3. Replace the battery compartment cover.

4. Plug the USB receiver into one of your computer’s USB ports.

Now you are ready to use the mouse.

Caution

• Do not disassemble the device or operate the device under abnormal conditions.

• Do not submerge the device in water.

• If the device could not be functional, or there was thermal abnormal situation,

please re-plug in the USB.

• If you still encounter problems after going through the corrective measures,

please contact your dealer or an authorized service center for assistance.

•For more information regarding the Acer accessories, please visit the Acer website

at www.acer.com.

Environment

Temperature:

• Operating: 0 °C to 40 °C

• Non-operating: -10 °C to 60 °C

Humidity (non-condensing):

• Operating: 10% to 90%

• Non-operating: 10% to 90%

Manufacturer address

Acer Inc.

8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City 221, Taiwan address

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesired operation. Warning: Changes or modifications not expressly

approved by the party responsible for compliance could void the user's authority to

operate the equipment.