Quick Start Guide
Specifications
Dimensions(L x W x H):103*65*38mm Weight:60g
Buttons:3 Connector Type:USB
Sensor Type:Optical Model:AMR910
Connector DPI:1200
Device Features
1. Left button 4.Optical sensor
2.Scroll wheel 5.Battery cover
3.Right button
How to Use
1. Open the battery compartment cover at the bottom of the mouse;
remove USB receiver.
2. Insert two AAA batteries into the battery compartment.
3. Replace the battery compartment cover.
4. Plug the USB receiver into one of your computer’s USB ports.
Now you are ready to use the mouse.
Caution
• Do not disassemble the device or operate the device under abnormal conditions.
• Do not submerge the device in water.
• If the device could not be functional, or there was thermal abnormal situation,
please re-plug in the USB.
• If you still encounter problems after going through the corrective measures,
please contact your dealer or an authorized service center for assistance.
•For more information regarding the Acer accessories, please visit the Acer website
at www.acer.com.
Environment
Temperature:
• Operating: 0 °C to 40 °C
• Non-operating: -10 °C to 60 °C
Humidity (non-condensing):
• Operating: 10% to 90%
• Non-operating: 10% to 90%
Manufacturer address
Acer Inc.
8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City 221, Taiwan address
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation. Warning: Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Loading...