Winston BA1TA4 Operators Manual

Winston

Breader / Sifter Table

for breading, sifting, rolling,

kneading, and cutting

BA1TA2 & BA1TA4

Use & Care Manual

8525 Rev 9

rs 5-24-07

www.winstonind.com

800-234-5286

BA1TA2

Congratulations on your purchase of Winston’s Breader/Sifter Table.You will benefit
from the ability to wet and bread product, roll and cut dough, blend and sift flour or
breading–and it only requires five square feet of floor space.

LOW MAINTENANCE

The Winston Breader/Sifter Table has no electromechanical parts to break down. It’s
virtually maintenance free. Top grade stainless steel is easy to clean up.

ACCELERATE PRODUCTION

Sift up to 25 lbs. of breading in just two minutes.The Winston Breader/Sifter Table
separates dough balls while blending breading and seasonings to be reused. Lower
the lid and you have additional workspace for rolling, kneading, cutting, and more.

BUIL T T O LAST

Winston’s Breader/Sifter Tables are designed for high volume usage.They are built
to comply with all applicable standards for manufacturers. The Breader/Sifter Table is
UL Sanitation approved.

We want you to be happy with your new Breader/Sifter Table.Should you have any
questions or comments, please feel free to call our customer service center at
1-800-234-5286.

Thanks for your business!

BA1TA2 & BA1TA4 – Breader-Sifter Table

DESCRIPTION

2

www.winstonind.com

800-234-5286

Copyright© 2007 Winston Industries, LLC. All rights reserved. CVap and Collectramatic are registered trademarks of Winston Industries, LLC.The CVap logo and
Collectramatic logo are trademarks of Winston Industries, LLC.All other company and product names may be trademarks of their respective companies.

Table of Contents

Description ...................... 2

Warning ............................ 3

Installation........................ 4

Nomenclature .................. 5

Operating.......................... 6-7

Daily Care ........................ 8

Troubleshooting .............. 9

ZAP Warranty .................. 10

Terms & Conditions ........ 11

Internet: www.winstonind.com
Email: [e-mail]
Phone: [phone] • 502-495-5400 • Fax [phone]
Mail: 2345 Carton Drive • Louisville, KY 40299 USA.

Need to contact us? Choose the
most convenient method.

Read and understand this entire use and care manual before operating your
breader/sifter table.

WARNING:

Operating this appliance can be dangerous.
Read, understand, and obey the following warnings. If you do not, you could be

burned, badly hurt, or killed!

• Do not stand on appliance. Do not use appliance for any purpose other than its
primary functions.

• Have appliance serviced ONLY by a trained servicer. Do not allow personnel to
operate appliance while it is being serviced.

• To prevent the hinged cover from falling when it is in the up and open position,
be sure that it is locked in place with the drip pan.

• Protective gloves should be worn to prevent burns associated with handling hot
baskets from fryers.

• Always perform daily cleaning procedures for this appliance. Build-up of food res­idues high in acid or chlorides can cause permanent damage to the

stainless steel and can contaminate foods!

CAUTION: Prior to using appliance for the first time, perform the daily cleaning

procedure listed on page 8.

WARNING

BA1TA2 & BA1TA4 – Breader-Sifter Table

3

www.winstonind.com

800-234-5286

SHIPPING DAMAGE

All equipment should be thoroughly examined for shipping damage before, during
and after unloading. It has been carefully inspected at our factory and the carrier
has assumed responsibility for its safe arrival.If the equipment is damaged,
either apparent or concealed, a claim must be made to the carrier.

APPARENT LOSS OR DAMAGE

If there is an obvious loss or damage, it must be noted on the freight bill or express
receipt and signed by the carrier’s agent;otherwise, the carrier may refuse the
claim.The carrier will supply the necessary forms.

CONCEALED LOSS OR DAMAGE

When loss or damage is not apparent until after the equipment is uncrated, a claim
for concealed damage must be made.Upon discovering damage, make a request in
writing to the carrier for inspection within 15 days, and retain all packing.The carrier
will supply an inspection report and the required claim forms.

PHYSICAL

BA1TA2 & BA1TA4 – Breader-Sifter Table

INSTALLATION

4

www.winstonind.com

800-234-5286

Model Height incl. Width Depth Weight

Legs (IN/MM) (IN/MM) (IN/MM) (LBS/KG)

BA1TA2 36.7/932 58.3/481 31.3/795 131/60

BA1TA4 36.7/932 58.3/1481 31.3/795 131/60