Winplus LM55931 User Manual

App-Controlled

Smart LED Light Strip

Model: LM55931

CARE & USE INSTRUCTIONS

IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY

TECHNICAL SPECIFICATION INSTALLATION

Input voltage: 120VA
Output voltage: 12VDc
Bluetooth ® distance:
Frequency band: 2.4GHZ
Types of LED:
Maximum LED: 20ft (total combined)
Maximum amperage draw: 3A

c, 60Hz

30ft (if no obstacles)

5050 SMD RGB

PACKAGE CONTAINS

120V Home Adapter

& Converter Cable

LED Strips

Extension

Cables

4 x 24”

Extension

Cables

Smart Lighting
Hub Controller

12V DC

12V DC

4 x 36” Multi-Color

12V DC

12V DC

LED Strips

Winplus
Smart Lighting
Hub Controller

®

Lights will ONLY work
when power arrows are
aligned as shown above

Total combined 20ft

12V DC

12V DC

12V DC

12V DC

• Plug the adapter with converter cable

into any standard 120V wall socket for power supply.

• Connect the App-Controlled

Smart LED Light Strip

or

extension and create your personalized lighting experience

EXTENDABLE

Winplus

The

up to a maximum length of 20ft (6m) using compatible extension strips. To function properly,
extension strips must be connected to the same type of strip. (see example on the right)

APP INSTALLATION USING THE APP

Compatible with iPhone 4s &

higher, iPad3, iPad Mini, iPad Air

& higher, and iPod touch 5th

Requires iOS 7.0 or higher.

App-Controlled

Smart LED Light Strip can be extended

FPO FPO

Scan to download APP

Generation & higher.

Scan to download APP

Compatible with phones

with Android™ 4.3 or higher.

Note: not all Android™ phones
are equipped with Bluetooth®

Smart v4.0 required for

this application.

• To install Smart Lighting APP

on your Smartphone, scan
above QR code to find the

compatible APP for iOS or

Android.

• Or you can search for the
APP through the APP Store
or Google Play

WINPLUS LED

• Once installed, open the

APP and begin enjoying

your Winplus® experience.

V1.1 DEMO

Smart LED Hub

Note: The portion of
strip that is cut-off is
no longer usable.

+

12V DC12V DC

Multi color + Multi color extension

Tap “Smart LED Hub” Icon to start

APP will automatically pair to the Hub

when both are powered on (including

Bluetooth ®) and within 30ft (9m)

USING THE APP CONT.

A

Master On/Off Switch

Press and hold zone icon, select “Select

Press “Yes” to delete.

Multiple” then select your desired zone by

LED Zone Functions:

B

Connect and control up to 4 separate

A

zones.

pressing “Confirm”. To ungroup your
selection, press and hold zone icon and
select “Ungroup”.

Select Color:

Choose from up to 49 different colors.

Press "Select Color", select your desired

color and press “Confirm”.

On/Off: Press each zone icon to turn LED

B

On or Off.

Move Zone Icon:

C

Press and hold zone icon, select “Move”

to position each zone icon at your desired
location.

C

Save Preset:

You can save your favorite settings.
After creating your setting, press "Save

Preset" and enter your preset name. You

can save up to 10 preset settings.

Select Preset:

Brightness:

D

Slide bar to adjust brightness setting.

E

LED Mode:

Choose from 8 different modes
Note: Music Mode is sound activated.

You can select your previously saved

D

Rename Zone Icon:

Press and hold zone icon, select

preset setting, press "Select Preset" and
choose your saved setting.

“Rename” to rename each icon. (Note:

E

Maximum 4 characters).

Delete Saved Preset Setting:

To delete a saved preset setting, press

F

Speed:

Slide bar to adjust the speed of the

movement from each LED Mode.

Select Multiple:

F

You can select multiple zones and control
the same setting at once.

"Select Preset" and press and hold the

preset setting that you wish to delete.

WARNINGS

1. Do not install or use product if it, in any way, impairs the safe
operation at home. You assume all responsibilities for the safe and

prudent operation of the product and APP.

2. Follow manufacturer’s instructions to ensure the product is properly
& safely installed.

3. Check your state or provincial laws before installing.

4. This product is intended solely for decorative purposes.
Manufacturer and Seller assume no liability for installation or use, which
are solely the responsibility of the purchaser.

5. Do not stare directly into the LED light strip when illuminated. Do not
allow pets or children to stare directly into the LED light strip when
illumniated.

6. The Manufacturer and Seller are not responsible or liable for
consequential, incidental, or indirect damages, whether to person or
property, resulting from the installation or improper use of this product.

WARNING: This product contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm.

“Contains Transmitter Module FCC ID: WUI-LM55931”

FCC statement:
FCC Part 15.19 Warning Statement

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.

FCC Part 15.21 Warning Statement
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED
BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.

FCC Part 15.105 Warning Statement

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy, and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica­tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for

help

RF statement:

The device has been evaluated to meet general RF exposure
requirement.
To maintain compliance with FCC’s RF exposure guidelines, this
equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body.

The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Winplus Co., Ltd. is under
license. Other trademarks and trade names are
those of their respective owners.

Have a comment or question?
Email us at: [e-mail]
or visit us online at: www.winplususa.com

Winplus North America, Inc.

820 South Wanamaker Avenue, Ontario, CA 91761 USA

Tel: [phone]
© 2016 Winplus North America, Inc.

All rights reserved.
3M™ is a trademark of 3M Company.

iPhone, iPad and iPod touch are trademarks of Apple Inc.

Android is a trademark of Google Inc.

ML-55931_V1