Winegard TN-2033, TN-2055 User Manual

TravelNet Internet Only Cellular Router Activation Guide

Activation Instructions For Models TN-2033, and TN-2055:

Verizon TN-2055 Activation:

1. Connect an Ethernet Cable directly to the TravelNet Cellular Router and the

Laptop.

2. Enable the Local Area Network, when connected, go to the next step.

3. Open a web browser (Internet Explorer, Firefox, Mozilla, Safari)

4. Enter the IP address: 192.168.1.10

Figure 1

Figure 2

5. Enter the user name ‘ctek’ and password ‘ctek’

6. Click on the Login button.

7. Click on the Activation button.

Ver. 1.5
4/21/2009 - 1 -

Figure 3

8. Click on the Over The Air Activation button.

9. If Network Stability is OK For Activation (if Not Ok for Activation, wait 3

minutes.) If Not OK for Activation for 15 additional minutes, contact Support.

10. Click the Activate button.

11. Wait 3 minutes, then check status. If still in progress, wait an additional 3

minutes. If still in progress or ‘failed’, contact support.

12. When ‘Activated’ click Back button

13. Click the Home button.

14. Go to Interfaces-Wireless and

Wireless Connection: and

Select ‘Enable’ (refer to

figure 11)

Figure 4

15. At the bottom of the page, click the Update button.

16. Click on the Home button.

17. Click on the Restart button and confirm by clicking the Restart button again, and

wait 30 seconds.

18. Click on the Home button.

Ver. 1.5
4/21/2009 - 2 -

19. Click on the Status-Wireless button, and verify that there is a Current IP address.

This may take several minutes depending on the carrier network.

Figure 5

20. Click on the Home button.

21. Click on the Restart button and confirm by clicking the Restart button again, and

wait 30 seconds.

22. Do a restart of all network devices in order, first the TravelNet Router, 2nd the

Edimax Router, and finally laptop.

Sprint TN-2033 Activation:

1. Connect an Ethernet Cable directly to the TravelNet Cellular Router and the

Laptop.

2. Enable the Local Area Network, when connected, go to the next step.

3. Open a web browser (Internet Explorer, Firefox, Chrome, Mozilla)

4. Enter the IP address: 192.168.1.10

Figure 6

Ver. 1.5
4/21/2009 - 3 -

Figure 7

5. Enter the user name ‘ctek’ and password ‘ctek’

6. Click the Log In button.

7. Click on the Activation button.

8. Click on the Over the Air Activation button

Figure 8

9. If Network Stability is Ok for Activation then go to step 10, if Not Ok, then wait 3

minutes. If still Not Ok, call support.

Figure 9

Ver. 1.5
4/21/2009 - 4 -