Winegard RZ-5000, RZ-5035 Installation Manual

Amplified Local HD and Digital Broadcast TV Antenna

for VHF & UHF Digital and HD T V Channels

Antenna Head

Installation Guide

Models RZ-5000 White and RZ-5035 Black

INSTALLATION ON EXISTING
CRANK-UP ANTENNA

NOTE: Before installation, ensure antenna has enough

space to stow around existing booms. A minimum
clearance of 8” on both sides is required.

1. Crank existing antenna into up position.

2. Disconnect existing coax cable from antenna head,

and remove pins/e-clips that secure the existing
antenna’s bracket to the elevating booms. Remove the
existing antenna head.

3. Position the Rayzar z1 adapter so the holes on the

bracket are aligned with the holes on the booms.
Insert both pins through adapter and booms. Fasten
e-clips in place on pins. Ensure the e-clips are properly
secured into the groove on the pin.

4. Thread the existing coaxial cable through the gap in

the adapter.

5. Attach the coaxial cable to the Rayzar z1 antenna

head. Tighten by hand - DO NOT OVERTIGHTEN.

6

5

4

3

7

6. Align slot on underside of Rayzar z1 head with post on

bracket. Gently push down on head and twist counter­clockwise to lock head onto bracket.

7. Ensure locking tab on bracket is aligned and snapped

into place with opening on antenna head base.

8. Once locking tab is engaged, on the opposite side of

base, ensure screw hole and screw alignment feature
on the antenna head are lined up as pictured. Insert
screw into hole and tighten. Gently pull up on antenna
head to ensure head is firmly locked in place.

WARNING: FAILURE TO PROPERLY SECURE ADAPTER

OR ANTENNA AS INSTRUCTED ABOVE COULD RESULT
IN THE ANTENNA BECOMING SEPERATED DURING TRAVEL
AND POTENTIALLY CAUSING INJURY OR DEATH.

Register your product at winegard.com/myantenna

Manuel disponible en français au www.winegard/support

8

2452371

Re v4 2-17

HOW TO RUN A CHANNEL SCAN

Using the television remote, select “Menu” and then
“Settings.” Select “Channel Setup.” Select “Antenna” or
“Air,” depending on your TV. Make sure you are not on
“Cable.” Select “Channel Search” or “Channel Scan.”

Keep in mind that steps to perform a channel scan may
vary. If the wording in your TV differs from the options
shown, refer to your TV user manual for help.

TIP: Check out antennaweb.org to help locate or fine-tune
specific channels in your area by inputting the zip code of
your current location.

TIP: Running a channel scan is NOT the same as pressing
Channel UP/DOWN on your remote.

For help, email [e-mail] or call 1-800-788-4417

Scan. Watch.

Perform Channel Scan

Select Menu then Channel
Search

Move antenna and rescan to find the
most channels within range. Scan
monthly for programming updates.

WINEGARD MOBILE PRODUCTS LIMITED WARRANTY

(5 YEARS PARTS; 1 YEAR LABOR)

Winegard Company warrants this product against defects in materials or workmanship for a period of five (5) years from the date of original purchase. During
year one (1) of such warranty, Winegard Company will also pay authorized labor costs to an authorized Winegard dealer to repair or replace defective products.
No warranty claim will be honored unless at the time the claim is made, Customer presents proof of purchase to an authorized Winegard dealer (to locate the
nearest authorized Winegard dealer, contact Winegard Company, 3000 Kirkwood Street, Burlington, Iowa 52601, Telephone [phone] or visit www.winegard.
com). Customer must provide proof of purchase with a dated sales receipt for the Winegard product to verify the product is under warranty. If the date of
purchase cannot be verified, the warranty period shall be considered to begin thirty (30) days after the date of manufacture.

If a defect in material or workmanship is discovered, Customer may take the product to an authorized Winegard dealer for service. Customer must provide proof
of purchase to verify the product is under warranty. If the product is brought to an authorized Winegard dealer for service prior to expiration of year one (1) of the
warranty period and a defect in material or workmanship is verified by Winegard Technical Services, Winegard Company will cover the Winegard dealer’s labor
charges for warranty service. The Winegard dealer must contact Winegard Technical Services in advance for pre-approval of the service. Approval of the service
is at the sole discretion of Winegard Company.

Alternatively, Customer may ship the product prepaid to Winegard Technical Services (located at 2736 Mt. Pleasant Street, Burlington, Iowa 52601, Telephone
800-788-4417). Customer must return the product along with a brief description of the problem and provide Winegard Technical Services with Customer ’s
name, address, and phone number. Customer must also provide proof of purchase to verify the product is under warranty. If the product is returned before the
expiration of the warranty period, Winegard Company will (at its option) either repair or replace the product.

This Limited Warranty does not apply if the product has been damaged, deteriorates, malfunctions or fails from: improper installation, misuse, abuse, neglect,
accident, tampering, modification of the product as originally manufactured by Winegard in any manner whatsoever, removing or defacing any serial number,
usage not in accordance with product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as salt spray
and acid rain. This Winegard Product was designed to work within the parameters of radio frequency (RF) spectrum allocation and broadcast technology in effect
at the time the product was manufactured. This Limited Warranty does not apply if the product becomes unable to perform its intended function as a result of
changes in RF spectrum allocation, changes in television broadcast technology, RF interference, or other factors beyond Winegard’s control.

RETURN AUTHORIZATION POLICY

A Return Material Authorization (RMA) is required prior to returning any product to Winegard Company or Winegard Warranty Services under this warranty
policy. Please call our Technical Services Department at 800-788-4417 or send an email to [e-mail] to obtain the RMA number. Please furnish
the date of purchase when requesting an RMA number. Enclose the product in a prepaid package and write the RMA number in large, clear letters on the outside
of the package. To avoid confusion or misunderstanding, a shipment(s) without an RMA number(s) or an unauthorized return(s) will be refused and returned to
Customer freight collect.

WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.

ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY ARE LIMITED TO THE FIVE YEAR PERIOD OF THIS WARRANTY.

In states that do not allow limitations on implied warranties, or the exclusion of limitation of incidental or consequential damages, the above limitations or
exclusions do not apply.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.

This warranty gives Customer specific legal rights. Customer may also have other rights that may vary from state to state.

Rev0 2/17

Winegard Company • 2736 Mt. Pleasant Street • Burlington, IA 52601 • 1-800-288-8094 • Fax [phone] • www.winegard.com

Winegard and Rayzar are registered trademarks of Winegard Company. Printed in U.S.A. ©2016 Winegard Company Rev4 2-17 2452371

Page 2