Windsor VP6, VP10 Service Manual
Service Guide
VP6 and VP10 Back Pack Vacuum
Repair Manual
1
Table of contents
Section 1: Introduction page 3
Section 2: Machine components page 4
Section 3: Tools Required page 5
Section 4: General Maintenance Page 6
Section 5: Electrical Troubleshooting Schematic Page 7
Section 6: Vacuum System Troubleshooting Pages 8-13
2
Section 1 Introduction
How the machine works:
The Vac Pac (VP6 and VP10) is a portable back pack vacuum cleaner intended for
commercial use.
The appliance is strapped to the operators back using a harness allowing the
operator to clean without having to move the appliance manually. The machine
uses a single motor in a canister with a hose and wand with multiple attachments
for various applications. The machine has two primary systems, the filtration system
and the vacuum system.
The filtration system consists of a micro (paper) bag a micro-Tex (cloth) bag and a
motor filter. An optional high efficiency filter kit is also available filtering at 99.98% at
0.3 microns.
The vacuum system consists of the canister body and single stage flow through
vacuum motor, there is no internal circuit breaker, the motor is protected by an
in-line fuse and a thermal cut-off switch for overload/overheat protection.
3
Section 2 Machine Components
1
2
3
4
1. Cap
2. Housing
3. Switch assembly
4. Power cord
5. Harness assembly
6. Accessories
7. Hose
8. Wand
9. Carpet tool
5
6
7
8
9
4
Loading...