Wildview STC-TGL5M User's Manual
STC-TGL2M / STC-TGL4M / STC-TGL5M
User’s Manual
Toll Free Customer Support 1-888-304-6125
www.wildviewcam.com
Version 1.3 06/07
Wildview Series
For Customer Service or Warranty Information Call
Toll Free
888-304-6125
WILDVIEW
P.O. Box 535189
Grand Prairie, Texas 75053-5189
Wildview Limited Warranty
Your Wildview scouting camera is covered by a 90 days Limited
Warranty on parts and labor from the date of original purchase, and
purchases must be made through an authorized dealer. The warranty
covers defects in workmanship and materials. The warranty does not
apply to units, which have been damaged or abused intentionally or
unintentionally. A purchase from individuals or unauthorized internet
sites voids the warranty.
Tampering with or altering the unit will void the warranty. Any
unauthorized service will void warranty. Original sales receipt must be
produced for any warranty service and a Return Authorization (RA)
number must be obtained from customer service at 888-304-6125
www.wildviewcam.com Toll Free 888-304-6125
prior to returning product
2
Wildview Series
Manual Contents
Camera overview 4
Camera kit contents 6
Battery and memory Installation 6
Definition 10
Programming 11
Mounting the camera 14
Viewing images 18
Saving and Deleting images 21
Memory compatibility chart 24
Technical Specs 25
General Information 28
Image Capacity Chart 30
www.wildviewcam.com Toll Free 888-304-6125
3
Camera overview
Wildview Series
Front view Side view
www.wildviewcam.com Toll Free 888-304-6125
4
Wildview Series
Open view image with major parts indication
www.wildviewcam.com Toll Free 888-304-6125
5
Wildview Series
Warning:
Camera kit contents
• Wildview series Digital Scouting Camera
• Camera driver
• User Manual
• USB cable
• Strap
Battery & memory installation
Do not use a different Voltage lead
acid battery other than the one specified in
this section. Doing so will damage the camera
and will void the warranty.
The Wildview Digital Scouting Camera is designed to
operate using alkaline batteries for optimum performance.
www.wildviewcam.com Toll Free 888-304-6125
6
Wildview Series
NOTE: Always have camera in the OFF position when
installing or removing batteries.
Batteries “C” cell
The internal battery compartment accepts 4 “C” cell
batteries. Be sure to use high quality brand name
alkaline batteries. Install batteries with correct polarity
(+/-) as noted inside the battery compartment.
12V Lead Acid external battery
The Wildview Scouting Camera is equipped with an
external power jack designed to accept a barrel plug
cable to attach to a sealed lead acid battery. (sold
separately). Battery cable and complete 12V Lead Acid
battery kits are available wherever Wildview scouting
cameras are sold or call toll free 888-304-6125. Only
Wildview external battery accessories are recommended.
• Insert the battery pack plug into the DC 12V jack at
the bottom of camera housing
• Turn on the camera by sliding the power switch to
PIR position
www.wildviewcam.com Toll Free 888-304-6125
7
Wildview Series
Please make sure the voltage and polarity (+/-) are
correct before connection. Incorrect voltage or
polarity (+/-) will damage the camera.
Memory Options
Your Wildview scouting camera is equipped with the
following:
Model SDRAM
STC-TGL2M 16MB
STC-TGL4M 32MB
STC-TGL5M 32MB
The camera is also equipped with an expandable media
card slot capable of accepting up to 2GB* SD card (sold
separately). With no memory card inserted into the slot,
the camera will use the built in SDRAM memory to store
images. If an SD card is inserted into the slot then the
camera will bypass the built in memory and utilize the SD
memory. The front counter display will show the number
www.wildviewcam.com Toll Free 888-304-6125
8
Wildview Series
of images on the built in memory unless the expansion
card is inserted at which point the front counter will only
display the number of images stored in the expansion
card.
Inserting SD card
Make sure camera is in the OFF position whenever
adding or removing memory.
• Insert SD memory card in to the SD card slot
completely and in the correct direction as shown on
the inside of the housing.
• To remove the SD memory card, depress the SD
card and pull out the card gently.
SD cards must be clean (no images from other
sources.)
www.wildviewcam.com Toll Free 888-304-6125
9
Wildview Series
Definition
• Time out: To set the amount of preset time in
minutes the camera will sleep between PIR triggering
• Resolution: The resolution selection that you have
selected.
Model Hi Low
STC-TGL2M 2.0M 0.3M
STC-TGL4M 4.0M 1.3M
STC-TGL5M 5.0M 3.0M
• Date/Time: To set date and time stamp in the picture
• Flash: Auto / On / Off mode
• Burst: To set the number of pictures the camera will
take per PIR triggering
o 1P: Single image capturing per PIR triggering
o 2P: Two images continuous capturing per PIR
triggering
www.wildviewcam.com Toll Free 888-304-6125
10
Loading...