WIKA TT.50 Data sheet
Twin-Temp Transmitting Accessories and Options
Thermometers
Application
Industrial type design for fluid medium which does not
corrode 304 stainless steel. Designed for applications
requiring local readability using a mechanical measuring
element while affording an additional means of electronic
data acquisition from the same instrument.
Sizes
5" (127 mm) - Type TT.50
Accuracy
+ 1.0% of measurement range
Ranges
o
-40
F to 550 oF (and equivalent Celcius)
Over/Under Range Protection
Temporary over or under range of 50% (maximum
exposure 500
o
F)
Twin-Temp Thermometer
Type TT.50
Standard Features
Connection
Material: 304 stainless steel
Center back mount (CBM) - Type TT.50
1/2" NPT standard
Stem
Material: 304 stainless steel
Diameter: 1/4" (6.35 mm)
Length: 2 1/2" to 48" (63.5 mm to 1,219.2 mm)
Measuring Element (Mechanical)
Bi-metal helix
Measuring Element (Electrical)
Thermocouple
Type K Grounded Junction Thermocouple standard
(Type J, E, and T available)
RTD
Platinum 100-ohm, DIN curve (0.00385 Ohm/Ohm/oC)
(3 wire standard configuration)
Case
Material: 304 stainless steel
Hermetically sealed per ASME B40.3 standard
External reset slotted hex head on back of case
Dial
White aluminum, dished, with black markings
Pointer
Black aluminum
Standard Scales
Single: Fahrenheit or Celsius
Dual: Fahrenheit (outer) and Celsius (inner)
Window
Flat instrument glass
Order Options
Weather-proof Housing and Plug
7/8-20 UNEF threaded barrel with busing and
compression nut. Provides environmental
protection to thermocouple/RTD connection.
Electrical Connection With Lead Wire (½ NPT)
Available in thermocouple or RTD in 6" increments.
Allows site installation using other enclosures or
piping systems.
Thermocouple Enclosure Head
A protective enclosure threads onto the optional ½
NPT electrical connection. The housing protects
electrical connections from the environment.
Houses a 4-20 mA transmitter or terminal block.
Aluminum housing is standard.
Terminal Block
Provides a connection point for the thermocouple or
RTD. Mounts in thermocouple head with 2 screws.
4-20 mA Transmitter
Refer to transmitter specifications
Additional Options
Thermowells
Acrylic, Lexan, and safety glass window
Calibration certification traceable to NIST
Warranty
Limited one year warranty as stated in WIKA's
Terms & Conditions of Sale
TT.50
Dimensions:
enclosure headenclosure head
enclosure head
enclosure headenclosure head
Thermocouple
enclosure head
connection is ½"NPT.
Must specify "Lead
Wire" connection
with thermocouple
enclosure head.
7/8" - 20 UNEF
thread connection
(non-lead wire
connection)
THE MEASURE OF
Total Performance
Ordering Information:
State computer part number (if available) / type number / size
/ range / connection size and location / options required.
Specifications given in this price list represent the state of engineering at the time of printing.
Modifications may take place and the specified materials may change without prior notice
ATM
05/02
TM
WIKA Instrument Corporation
1000 Wiegand Boulevard
Lawrenceville, Georgia 30043-5868
Tel: 770-513-8200 Fax: 770-338-5118
http://www.wika.com e-mail: info@wika.com
Loading...