WIKA CPB 5000 DP Operating Instructions Manual

Operating Instructions
Betriebsanleitung

CPB 5000 DP

Addition to the operating instructions of the CPB 5000
Ergänzung zur Betriebsanleitung CPB 5000

Differential Pressure Balance GB

Differential Pressure Balance CPB 5000 DP

Differenzdruck-Kolbenmanomete

r

D

Differential Pressure Balance / Differenzdruck-Kolbenmanometer
CPB 5000 DP

WIKA Operating Instructions Differential Pressure Balance Version 1.0

2

Information

This symbol provides you with information, notes and tips.

Warning!

This symbol warns you against actions that can cause injury to people or
damage to the instrument.

Operating Instructions Differential Pressure Balance Page 3 - 4

GB

Betriebsanleitung Differenzdruck-Kolbenmanometer Seite 5 - 6

D

Differential Pressure Balance / Differenzdruck-Kolbenmanometer
CPB 5000 DP

WIKA Operating Instructions Differential Pressure Balance Version 1.0

3

1. Arrangement of control elements .

2. General description .

The instrument includes two common pressure-balances of the basic series CPB5000.
For the calibration of differential gauges at a static line pressure, the systems can be seperated.

One system is used to generate the line pressure. The second one supplys the differential pressure
(including line pressure). Following the description for the use of the instrument.

3. Working principle .

Piston 2

Inlet Outlet Spindle

Bypass

Differential pressure Static line pressure

Outlet Inlet

Piston 1

Device under test

Spindle

2 connections for
test specimen

Initial pressure pump

Fixture for
ConTect-System

Water
level

Spindle pump

Screwed drain plug for
tank (hydraulic only)

Fixture for
ConTect-System

Inlet valve

(pneumatic only)

Outlet
valve

2 Test pressure
gauges

Bypass-valve

Inlet valve

(pneumatic only)

Outlet
valve