1.0 10/20/2009 EK Complete Formatting, Pre-Release Changes, Info
addition
1 General Description
This specification provides a general guideline on the performance and the integration of W2CBW009S,
a complete wireless subsystem featuring full 802.11 b/g WLAN capability as well as class 1.5 Bluetooth
capability in a small form factor module solution. The W2CBW009S device was designed to simplify
the process of adding wireless capability without lengthy design cycles or complex RF design. Both
radios are fully tested for coexistence, both internally and with other external radio technologies. A
full menu of certifications will also be provided, simplifying the certification process for your entire
end product and further reducing valuable time-to-market. Based on world-class silicon from
Wi2W i par tner Marvell, the W2CBW009S has also been fully optimized for throughput and receive
sensitivity through careful design practices. St ate-of-the a rt softwa re de vel opment resourc es are also
available to create drivers for uniqu e processors a nd operating systems if needed, or to optimize the
wireless subsystem to fit your needed application with ease.
Page 3 of 20
The content of this document is to be treated as strictly confidential and is not to be disclosed,
Reproduced or used, except as authorized in writing by Wi2Wi, Inc.
The specification maximum and minimu m limits prese nted herein are those guaranteed when the unit is
integrated into the Wi2Wi’s W2CBW009S-DEV Developm ent Sys tem. These limits ar e to s erve as th e
representative performance characteristics of the W2CBW009S when properly designed into a
customer’s product. Wi2Wi makes no warranty, implied or otherwise specified, with respect to a
customers design and the performance characteristics presented in this specification.
The W2CBW009S module is available in single antenna configuration.
This device also complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interfere nce that may cause undesired operation.
Modifications or changes to this equipment not expressly approved by Wi2Wi may void the user’s
authority to operate this equipment.
2 Features
•
Compact design for easy integration:16 mm x 16mm x 2.3mm
•
LGA with 76 pins
•
WLAN technology based on Marvell’s 88W8688
•
Bluetooth technology based on Marvell’s 88W8688
•
Certified dual mode radio
•
Optimized RF and ele ctrica l design for bett er perf ormance i n co-exis tence wi th other wirel ess
standards
•
Dual-antenna design with separate antenna pins for Bluetooth and WLAN (option is available for
single antenna solution)
•
Operates in 2.4 GHz ISM band
•
ROHS Compliant
•
Fully integrated coexistence solution
•
WLAN Specific Features
SDIO 1.1 and G-SPI interfaces
o 802.11s Mesh Networking
o 802.11h Dynamic Frequency Selection
o 802.11e Quality of Service
o 50-Ohm antenna launch
o Support for WinCE, WinMobile, Windows XP SP3, Vista 32 bit, and Linux 2.6.xx(can be
ported to ot her operating systems)
o 1, 2, 5.5 and 11 Mbps data rates for 802.11b (DSSS/CCK modulation)
o 6, 9, 12, 18, 24, 36, 48 and 54 Mbps data rates for 802.1 1g (OFDM modulation)
• Bluetooth Specific Features
UART, PCM, I2S interfaces
o
50-Ohm antenna launch
o
Support for WinCE, WinMobile, Windows XP SP3, Vista 32 bit and Linux 2.6.xx (can
be ported to other operating systems)
o
GFSK modulation for Bluetooth version 2.1
o
Data rate up to 1Mbps for Bluetooth version 2.1
The content of this document is to be treated as strictly confidential and is not to be disclosed,
Reproduced or used, except as authorized in writing by Wi2Wi, Inc.
W2CBW009S is a complete module combination of 88W8688 802.1b/g and Bluetooth. It includes
all
the components needed to operate both the radios. It pres erv es the ch aracteristics from Marvell chipset
while providing the optimized system level functionality and performance.
3.1 Block Diagram
Figure #1 shows the detailed block diagram of W2CBW009S
Figure 1: Block Diagram
.
3.2 Pin Description
Table 1: Pin Description
Pin
1
2
3
4
5
6
7
Page 5 of 20
Pin Name
HSPWR1
HSPWR2
HSPWR3
GND4
GND5
ANT_SEL_N
TR_N
The content of this document is to be treated as strictly confidential and is not to be disclosed,
Reproduced or used, except as authorized in writing by Wi2Wi, Inc.