Whynter ARC-13PG User Manual

WHYNTER PORTABLE AIR CONDITIONER

MODEL# : ARC-13PG

Instruction

Manual

Thank you for your purchase of this WHYNTER product. Please read this Instruction Manual carefully before

using product to ensure proper use. Keep this manual in a safe place for future reference.

Thank you for choosing the Whynter portable air conditioner. Please follow the instructions given in this booklet to obtain
the very best performance from your portable air conditioner and take full advantage of the many advance features that your
portable air conditioner offers you. We trust that your Whynter air conditioner will provide the performance and reliability that
we stand for.

Please keep this user manual in a safe place for future reference.

DISPOSAL

2

This symbol on the product or its packaging indicates that the appliance cannot be treated as normal domestic trash, but
must be handed in at a collection point for recycling electric and electronic appliances. Your contribution to the correct
disposal of this product protects the environment. Furth er in form ation about the recycling of this product can be obtained from
your local municipal authority.

PARTS OVERVIEW

3

1. Exhaust hose 2. Rectangle Connector 3. Round Connector 4. Round Cover

5. Window Suction Cup 6. User Manual 7. Remote Control 8. Window Slide Bars
For this portable air conditioner to operate correctly, the hot air from the back of the unit must be vented to the outside. Please follow the

instructions below for window kit installation.

1. Extend the exhaust hose (Part 1) at least 6” and insert it to the outdoor exhaust outlet at back of the air conditioner.

2. Attach the round connector (Part 3) to the other end of the exhaust hose.

3. Open your window and place the adj ustable window slide bars (Part 8) to the opening of the window. Extend the Slide Bars so it covers the

window opening completely.

4. Lower/Shut the window until it holds the Slide Bars are held in place tightly.

5. Attach the exhaust hose with the round connector to the round opening of the window slide bar.

6. When the air conditioner is not in use, remove the hose from the window slide bars and place the round cover (Part 4) to the round opening

of the bar.

7. For non-permanent installations, such as doors or sliding doors that may need to be opened or closed, attach the rectangle connector (Part

2) to the end of the exhaust hose and place the rectangle connector at the opening of the door.

8. The window suction cup is an optional part which can be used to hold up the exhaust hose to a desired position.

UNIT OVERVIEW

4

1. Control panel 2. Air outlet grille 3. Air filt er grille 4. Drain plug 5. Outdoor air inlet

6. Outdoor exhaust 7. Handle

Incorrect Assembly: Correct Assembly:

5

Ensure curtains or other objects are not obstructing the air inlet filters. (Fig 3)
Do not bend or crush the exhaust hose while in use. (Fig.3)

SAFETY PRECAUTIONS

 Ensure curtains or other objects are not obstructing the air inlet filters.
 Do not bend or crush the exhaust hose while in use.
 Transport the unit in an upright position only, or leave it in an upright position for at least 2 hours before first use.


Always place the unit on even and hard and level surface.

 The power cord is UL listed. It has a built-in L.C.D.I. (leakage, current, detection, interruption) circuit breaker for added safety. If

the power supply is interrupted, press the reset button to reconnect the unit to power source.



Make sure this unit is connected to a correctly grounded power supply outlet. Do not use an extension cord or power strip.



Do not under any circumstances cut or remove the third (ground) prong from the power cord.

 Do not turn this unit on and off by plugging and unplugging. Always use the ON/OFF switch.
 Do not sit or place objects on the unit.
 Always allow air flow around the portable air conditioner for at least 20’. Do not use this unit inside closets, cabinets and/or

cramped spaces between furniture.



To avoid the risk of shock, the product should never be used in bathrooms, shower rooms, or in any other steamy or wet areas.

 Do not operate this unit without the air filter.


Do you use harsh chemicals to clean the filter. Dry thoroughly before inserting the filter into the unit

 This unit is optimized to operate in an ambient temperature of 64°F – 100°F.


Do not repair, disassemble and/or modify the unit by yourself.

 An opening in a window or wall is required to accommodate the exhaust hose (window kit supplied) to exhaust the hot air from

the back of the unit.



Do not add extra length to the exhaust hose by more than a total length of 9’. This will reduce the cooling efficiency of the
air conditioner.



Always turn off the portable air conditioner when cleaning the air filter, and transporting.

 At the end of each season, all water must be drained from the unit and filter must be cleaned before storage.


Do not use an excessively wet cloth, industrial solvents, oil-based products to clean this portable air conditioner.

 Do not allow children to climb, stand or hang on the outside of the dispenser. The air conditioner could tip over and get damaged

and seriously injure somebody.



Do not store or use g asoline or other flammable vapors and liquids in the vicinity of this or any other appliances.

portable

THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE ABOVE INSTRUCTIONS ARE NOT FOLLOWED.

6