WHIRLWIND SELECTOR
The famous Whirlwind Selector is the only A/B A+B box that provides totally noiseless
switching between channels. It can be used either as a 1-in 2-out device or as a 2-in
1out device. Whichever way you use it, the Selector is the best channel-switching
device your money can buy.
The Selector can be powered by either a 9-volt bat tery or DC adapter (Whirlwind
accessory T401-ND, not included). To insert a battery, simply remove the 4 screws from
the bottom of the unit and clip a 9-volt alkaline type battery to the battery clip. Replace
the bottom and screws.
On The Selector are three ¼” jacks, one 1/8” jack, two LEDs and two foot-switches as
outlined below:
I/O PORT
A 1/4” jack that should be used for input from a musical instrument when the unit is
being used as a 1-in, 2-out device, or as an output to an amplifier when the unit is being
used as a 2-in, 1-out device.
A and B
1/4” jacks that should be used as outputs to an amplifier when the unit is being used as
a 1-in, 2-out device or as inputs from musical instruments when the unit is being used
as a 2-in, 1-out device.
A/B (Button)
When pressed, toggles the I/O port between “A” and “B”
BOTH (Button)
When pressed, engages the A and B channels simultaneously. When pressed again the
selection returns to the channel which was previously selected.
LEDs
Indicates which jack is selected for output or input. Both LEDs illuminate when the
BOTH feature is engaged.
This product is warranted to be free of defects in materials or workmanship to the
original purchaser for a period of 2 years from the date of purchase. Should warranty
service be required, return the unit postage paid along with the original sales receipt to:
Whirlwind Music Dist., Inc.
99 Ling Road
Rochester NY 14612
Whirlwind will, at its option, repair or replace the unit. This warranty does not cover
damage resulting from abuse, unauthorized modifications or use of the product in
unintended applications.
Loading...