Whirlpool YWML35011KW, YWML35011KS Dimension Guide
A
Bump out
Kit
DIMENSIONS
MICROWAVE OVEN
PRODUCT DIMENSIONS
1 of 8
MODEL #
YWML35011K
Unit of Measurement in cm
Overall Width (A) 30 76
Overall Height (B) 105/
Height of the door (C) 105/
16
16
26.2
26.2
Depth without door (D) 17 43
Depth with door (E)
Depth with door open 90° (F)
Depth with Bump Out Kit (G)
16
187/
43 109
16
197/
46.9
49.4
A
G
C
B
FRONT VIEW
D
E
F
F
E
D
TOP VIEW
Back of
Cabinet
SIDE VIEW
IMPORTANT: Dimensional specications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Whirlpool® appliances are appropriately UL, CUL or CSA approved.
W11413207A
DIMENSIONS
J
Back of
MICROWAVE INTERIOR CAVITY DIMENSIONS
MODEL # YWML35011K
Unit of Measurement in cm
Cavity Height (J)
Cavity Height Including Highest Point of the Turntable (K) 67/
Cavity Width (L) 187/
Cavity Depth (M) 14 35.6
Turntable Diameter (N) 12 30.5
7 17.7
8
8
17.5
2 of 8
48
L
M
K
Cabinet
N
CAVITY INTERIOR FRONT VIEW CAVITY INTERIOR SIDE VIEW
IMPORTANT: Dimensional specications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Whirlpool® appliances are appropriately UL, CUL or CSA approved.
DIMENSIONS
OPENING/CLEARANCE DIMENSIONS
MODEL # YWML35011K
Opening/Clearance Measurement in cm
Width of cabinet opening (min.)* (A) 30 76.2
Typical height from cooking suface to
oor based on 36" countertops (B)
Typical height from top of cabinet
to cooking surface based on 36"
countertops (C)
Minimum height from oor to top of
cabinet opening (B + C = D). (D)
Recommended electrical connection
location (E)
36 91.4
24 61
60 152.4
See below schematic
3 of 8
FRONT VIEW
E
A
C
D
B
ELECTRICAL REQUIREMENTS
120 V, 60 Hz, AC only, 15 A or 20 A fused, electrical supply. is
required. A time-delay fuse or dedicated circuit is recommended.
Do not use an extension cord.
LOCATION REQUIREMENTS
Support structure must be able to support 150 lb (68 kg) including
microwave oven and upper cabinet including contents.
Mounting plate must attach to a minimum of one 2" x 4"
(5.1 cm x 10.2 cm) wall stud.
Mounting distance between a xed wall on the higed-side of the
door and the microwave oven is 1/2" (1.27 cm)
VENTING REQUIREMENTS
The microwave oven is factory set for recirculating ventilation. To
vent through the roof or wall, refer to installation instructions for
further information.
IMPORTANT: Dimensional specications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Whirlpool® appliances are appropriately UL, CUL or CSA approved.
Loading...