n ......................................................37
222222222222
WINE CELLARSAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electric shock, or injury when using your wine cellar, follow these basic precautions:
SAVE THESE INSTRUCTIONS
■
Plug into a grounded 3 prong outlet.
■
Do not remove ground prong.
■
Do not use an adapter.
■
Do not use an extension cord.
■
Disconnect power before servicing.
■
Replace all parts and panels before operating.
■
Remove doors from your old wine cellar.
■
Use nonflammable cleaner.
■
Keep flammable materials and vapors, such as gasoline,
away from wine cellar.
■
Use two or more people to move and install wine cellar.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
WARNING
Suffocation Hazard
Remove door from your old wine cellar.
Failure to do so can result in death or brain damage.
Important information to know about disposal of
refrigerants:
Dispose of refrigerator in accordance with Federal and Local
regulations. Refrigerants must be evacuated by a licensed,
EPA certified refrigerant technician in accordance with
established procedures.
Proper Disposal of Your Old
Wine Cellar
Before You Throw Away Your Old Wine Cellar:
■ Take off the door.
■ Leave the racks in place so that children may not easily climb
inside.
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned wine cellars are still dangerous
– even if they will sit for “just a few days.” If you are getting rid of
your old wine cellar, please follow these instructions to help
prevent accidents.
333333333333
INSTALLATION REQUIREMENTS
WARNING
D
Tool Needed
Gather the required tool before starting installation.
Phillips screwdriver
Location Requirements
Keep flammable materials and vapors, such as
gasoline, away from wine cellar.
Failure to do so can result in death, explosion, or fire.
NOTES:
It is recommended that you do not install the wine cellar near
an oven, radiator, or other heat source.
Do not install in a location where the temperature will fall
below 55°F (13°C). For best performance, do not install the
wine cellar behind a cabinet door or block the base grille.
Tools
Explosion Hazard
24" Models
245/8"
(62.5 cm)
A*
B*
B1*
13/16"
(3 cm)
351/4"-3513/16"
(89.5-91.0 cm)
Depth Dimensions
7
24
A*
B*
B1*
/8" (63.2 cm) -
w/o handle
265/8" (67.7 cm) -
WUW35X24DS
7
/8" (68.2 cm) -
26
WUW55X24DS
WUW35X24DS WUW55X24DS
C
D
A
B
C
B1
D
NOTE: Door clearance of 161/8" (41 cm) required to allow full
shelf extension.
A
Dimensions
7
A21
/8" (55.5 cm)
B251/2" (64.7 cm)
11
B1 25
C23
D
/16" (65.2 cm)
13
/16" (60.5 cm)
1
/16" - 345/8"
34
(86.5 cm - 88.0 cm)
Opening Dimensions
Height dimensions are shown with the leveling legs extended
to the minimum height.
NOTE: When leveling legs are fully extended, add ⁵⁄₈" (15 mm)
to the height dimensions.
If the floor of the opening is not level with the kitchen floor,
shim the opening to make it level with the kitchen floor.
15" Models
153/4"
(40.0 cm)
13/16"
(3 cm)
A*
B*
B1*
351/4"-3513/16"
(89.5-91.0 cm)
WUW35X15DS WUW55X15DS
C
A
B
C
A
B1
D
Depth Dimensions
7
24
A*
B*
B1*
A21
B25
B1 25
C15" (38.0 cm)
D
/8" (63.2 cm) -
w/o handle
5
26
/8" (67.7 cm) -
WUW35X15DS
7
26
/8" (68.2 cm) -
WUW55X15DS
Dimensions
7
/8" (55.5 cm)
1
/2" (64.7 cm)
11
/16" (65.2 cm)
1
34
/16" - 345/8"
(86.5 cm - 88.0 cm)
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your wine cellar into its final location, it is
important to make sure you have the proper electrical
connection.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only, 15– or 20–amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your wine cellar be provided. Use an outlet
that cannot be turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, unplug wine cellar or disconnect power.
NOTE: Door clearance of 105/8" (27 cm) required to allow full
shelf extension.
444444444444
INSTALLATION
WARNING
INSTRUCTIONS
Door Closing
Your wine cellar has four leveling legs. If your wine cellar seems
unsteady or you want the door to close more easily, adjust the
wine cellar’s tilt using the instructions below.
Unpack the Wine Cellar
Excessive Weight Hazard
Use two or more people to move and install wine cellar.
Failure to do so can result in back or other injury.
Remove the Packaging
Remove tape and glue residue from surfaces before turning
on the wine cellar. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your wine cellar. For
more information, see “Wine Cellar Safety.”
Dispose of/recycle all packaging materials.
When Moving Your Wine Cellar:
Your wine cellar is heavy. When moving the wine cellar for
cleaning or service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull
the wine cellar straight out when moving it. Do not wiggle
or “walk” the wine cellar when trying to move it, as floor
damage could occur.
Clean Before Using
After you remove all of the packaging materials, clean the inside
of your wine cellar before using it. See the cleaning instructions in
“Wine Cellar Care.”
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug into a grounded 3 prong outlet.
WARNING
Excessive Weight Hazard
Use two or more people to move and install wine cellar.
Failure to do so can result in back or other injury.
2. Move the wine cellar into its final location.
3. Turn the leveling legs to the right to lower the wine cellar or
turn the leveling legs to the left to raise it. It may take several
turns of the leveling legs to adjust the tilt of the wine cellar.
NOTE: Having someone push against the top of the wine
cellar takes some weight off the leveling legs. This makes it
easier to adjust the leveling legs.
4. Open the door
not, tilt the wine cellar slightly more to the rear by turning both
front leveling screws to the left. It may take several more
turns, and you should turn both leveling legs the same
amount.
and check that it closes as easily as you like. If
555555555555
Wine Cellar Doors
Tool Needed: #2 Phillips screwdriver
Remove Door and Hinges
1. Open the door to a 90° angle and remove the screws for
the bottom door hinge.
2. Remove the door by pulling it forward and away from the
wine cellar.
3. Remove the three screws from the top hinge and remove
the hinge.
Reverse Door Swing (optional)
NOTE: There are two hinges for reverse door installation, one for
a right-hand door swing and one for a left-hand door swing.
Install the top hinge designed for the desired door swing.
1. Remove the two screws attaching the bottom hinge to door.
C
6. Insert the three decorative screws removed in Step 3 into the
three holes in the upper right corner of the front of the wine
cellar.
7. Remove the screws for the mechanical switch and door stop;
remove the mechanical switch and door stop. Attach the
mechanical switch and door stop to the reverse side of the
door.
B
A
A. Bottom hinge pin
B. Door stop
C. Bottom hinge
2. Remove the door by lifting it up, and then pulling it away from
the wine cellar.
3. Remove the three decorative screws from the upper left
corner of the front of the wine cellar.
4. Remove the three screws from the right top hinge, and then
remove the hinge.
NOTE: The screws for the mechanical door switch are
located behind the seal. Remove the seal first, and then
remove the mechanical door switch screws. After
the mechanical door switch, place the seal in the original
position.
9. Attach the bottom hinge to the reverse side of the door, and
then flip the door 180º so that the hinge is now on the bottom
of the door.
10. Insert the top corner of the door into the top hinge pin and
reinstall the door on the wine cellar.
11. Press the door and the bottom hinge pin onto the bottom
hinge.
reattach
5. Using the three screws remove
the left top hinge to the upper left corner on the front of the
wine cellar.
NOTE: The left hinge is included in the bag with the “Use and
Care Guide.”
d in the previous step, attach
666666666666
A
B
C
D
12. Put decal at the top of wine cellar.
Place decal here
4. Remove the base grille.
To Replace the Base Grille:
1. Open the wine cellar door.
2. Reattach the mechanical switch using the two sensor screws.
3. Replace the two base grill screws. Tighten the scr
ews.
Handle Assembly
NOTE: Only for models WUW55X15DS & WUW55X24DS.
Decal
Place decal
13. After you change door (left hinge), place Whirlpool badge
at bottom of wine cellar. (Only models: WUW55X15DS &
WUW55X24DS)
NOTE: The decal & Whirlpool badge are included in the bag
with Use and Care Guide.
WARNING
Excessive Weight Hazard
Use two or more people to move and install wine cellar.
Failure to do so can result in back or other injury.
Helpful Tip: Put cardboard under wine cellar until it is installed in
cabinet opening. The cardboard will help avoid damage to floor
covering during installation.
NOTES:
To ease installation, using two or more people, place wine
cellar on its back.
To avoid scratching the front panel, place a soft cloth or
towel against the panel while installing the door handle.
Setscrews are preinstalled in the handle.
1. Remove the door handle and hardware bag containing the
hex key from the bubble pouch.
2. Place the handle on the mounting studs. The setscrews
should face down when installed correctly. If the handle is
installed upside down, proper installation will not be possible.
3. Push the door handle tightly against the door.
4. Insert the short end of the hex key into the setscrew and
tighten ¹⁄₄ turn past snug. Setscrew will not be recessed into
the handle.
5. Repeat Step 4 for other setscrew.
6. Keep the hex key with the Installation Instru
NOTE: The handle installation procedure should take less
than 5 minutes.
ctions
14. Check the alignment of the door and the door seals.
15. Tighten the hinge screws (as necessary).
Base Grille
You must remove the base grille to access the condenser coils
for cleaning.
To Remove the Base Grille:
1. Open the wine cellar door.
2. Using a Phillips screwdriver, remove the two screws from
the base grille.
3. Remove the two screws holding the mechanical switch to
the grille.
A. Mounting stud
B. Door handle
C. Setscrew
D. Hex key
7
7
WINE CELLAR USE
A
D
EC
B
A
GFD
EH
C
B
Normal Sounds
Your new wine cellar may make sounds that your old one didn’t
make. Because the sounds are new to you, you might be
concerned about them. Most of the new sounds are normal. Hard
surfaces, such as the flooring and surrounding structures, can
make the sounds seem louder. The following describes the kinds
of sounds and what may be making them.
■ Your wine cellar is designed to run more efficiently to keep
your wine at the desired temperatures and to minimize energy
usage. The high efficiency compressor and fans may cause
your wine cellar to run longer than your old one. You may also
hear a pulsating or high-pitched sound from the compressor
or fans adjusting to optimize performance.
Using the Control
For Style 1 and Style 2 models, the control for this models is located at the top front of the wine cellar compartment. Default temperatures
are in °F.
Style 1: Models WUW35X15DS and WUW35X24DS
■ Rattling noises may come from the flow of refrigerant or items
stored inside the wine cellar.
■ As each cycle ends, you may hear a gurgling sound due to
the refrigerant flowing in your wine cellar.
■ You may hear water running into the drain pan when the wine
cellar is defrosting.
■ You may hear clicking sounds when the wine cellar starts or
stops running.
Style 2: Model WUW55X15DS
A. Eco mode
B. Power
A. Power
B. Light
C. Compartment display
C. Compartment display
D. Temperature indicator
D. Decrease temperature
E. Increase temperature
E. Decrease temperature
F. Increase temperature
G. F/C Control
H. Light
888888888888
Style 3: Model WUW55X24DS
D
K
I
C
B
F
The control for this model is located in the middle of the wine cellar compartment.
A. Eco mode
B. Power
C. Decrease temperature (upper compartment)
D. Increase temperature (upper compartment)
E. Upper compartment display
F. Lower compartment display
G. Temperature indicator
H. Increase temperature (lower compartment)
Controls
For your convenience, your wine cellar control is preset at the
factory.
For single-compartment models (WUW35X15DS,
WUW35X24DS, WUW55X15DS), the preset temperature is 54°F
(12°C). For the two-compartment model (WUW55X24DS), the
preset temperature for the upper compartment is 45°F (7°C) and
the preset temperature for the lower compartment is 54°(12°C).
When the power is on, the temperature display shows the set
point temperature of the compartment(s).
Wait 24 hours for your wine cellar to cool completely before
adding wine.
NOTE: Adjusting the wine cellar temperature control to a
colder than the recommended setting will not cool the
compartments any faster.
Turn Wine Cellar On/Off:
Press the Power button/touch pad on your wine cellar for
3 seconds to turn On the wine cellar cooling system.
Press and hold the Power button/touch pad again to turn Off
the wine cellar cooling system. A 3-second countdown will
show in the compartment display. The Light button/touch pad
will operate to turn the light on and off within the wine cellar
compartment.
Increasing and Decreasing Compartment Temperature:
Press the Increase Temperature button/touch pad until the
desired temperature is reached in the desired compartment,
displayed in the compartment display(s).
Press the Decrease Temperature button/touch pad until the
desired temperature is reached in the desired compartment,
displayed in the compartment display(s).
Turn Light On/Off:
Press Light button/touch pad to turn the light on and off
within wine cellar compartment. The wine cellar will remain
illuminated for 10 minutes (even when door is closed) when
the Light is turned on. When the Light is turned off, the wine
cellar compartment will be illuminated when the door is open.
The light will turn off when the door is closed.
GAE
HJ
I. Decrease temperature
(lower compartment)
J. F/C Control
K. Light
Change Temperature Setting (on some models):
For models with °F/°C control button/touch pad, press the °F/
°C Control button/touch pad to switch from Fahrenheit to
Celsius or Celsius to Fahrenheit. The °F or °C on the
Temperature Indicator touch pad will illuminate to indicate
which temperature setting is currently in use.
For models without °F/°C control button/touch pad, press
and hold the Decrease Temperature and Increase
Temperature buttons/touch pads for 3 seconds. A 3-second
countdown will display.
Using Eco Mode (on some models):
When Eco mode is activated, the compartment display light will
turn off when the door is closed. When the wine cellar door is
opened, the light will stay on until the door is closed. The Light
button/touch pad and °F/°C control button/touch pad will
operate normally.
To activate Eco mode, press and hold the Eco mode button
for 3 seconds. A 3-second countdown will display.
To deactivate Eco mode, press and hold the Eco mode
button for 3 seconds. A 3-second countdown will display and
the wine cellar will return to normal operation.
Adjusting the Control:
If you need to adjust the temperature, wait at least 24 hours
between adjustments and then recheck the temperature.
To make the wine cellar colder, adjust the setting to a lower
temperature. To make the wine cellar less cold, adjust the setting
to a higher temperature.
NOTE: On some models, adjusting the temperature control raises
or lowers the temperature in the corresponding compartments,
but not both compartments.
Temperature Separator (Temperature Display)
(on some models)
The temperature separator displays the current temperatures
(Fahrenheit or Celsius) for the upper and lower compartments of
the wine cellar. To adjust the temperature settings, see “Adjusting
the Control” earlier in this section.
999999999999
Recommended Storing Locations (on some models)
For best storing and serving temperatures for your bottle of wine,
use the wine producer's recommended temperature setting. See
the wine’s label for details. It is recommended to store wine for
short-term (few months) at 55°F (13°C).
WINESCOMPARTMENT
White WineUpper compartment
Lighter Red WineLower compartment
Red WineLower compartment
Wine Racks
Remove and Replace the Top and Middle Racks
To Remove Racks:
1. Pull the rack forward until it stops.
2. Lift up on both sides of the rack to clear the shelf brackets
from the bracket support pins.
Stocking the Wine Cellar
NOTE: For optimum wine storage, place white wines at the top of
the wine cellar, light red wines in the center and red wines at the
bottom.
To Stock the Wine Cellar
1. Start stocking the wine cellar with the bottom display rack.
2. Starting on the left-hand side, place the first bottle in the rack
on its side with the neck of the bottle facing the front of the
wine cellar.
3. Pull the rack forward and out of the rack supports.
To Replace Racks:
1. Insert the rack into the compartment and slide it toward
the rear of the wine cellar.
2. Align the bracket support pins with the holes in the shelf
brackets, and then place the shelf into the rack supports
until properly in place.
Front of rack
3. Place the next bottle on its side with the neck of the bottle
facing the back of the wine cellar.
4. Alternate in this manner until the display rack is full.
5. Push the rack all the way in before pulling the next one
forward.
6. Pull the next rack forward and repeat steps 2 through 4;
repeat for remaining racks.
101010101010101010101010
7. To stock the bottom of the wine cellar, place bottles in the
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
grooves on the bottom of the wine cellar with the necks of
the bottles facing the back of the wine cellar.
WINE CELLAR CARE
Cleaning
Clean the wine cellar about once a month to avoid buildup of
odors. Wipe up spills immediately.
To Clean Your Wine Cellar:
1. Unplug wine cellar or disconnect power.
2. Remove all racks from inside the wine cellar.
3. Clean the interior.
Lighting the Wine Cellar
The refrigerator has an interior light that comes on any time the
door is opened. Refer to the “Using the Controls” section for
options on controlling the interior light.
NOTE: The light is an LED which does not need to be replaced. If
the LED does not illuminate when the door is opened, call Service
to replace the light. See Assistance or Service for contact
information.
Style 1 - Models with stainless steel trim
Using a clean sponge or soft cloth and a mild detergent
dissolved in warm water, hand wash and rinse thoroughly the
removable parts and interior surfaces. Dry with a soft cloth.
Style 2 - Models with wooden trim
IMPORTANT: To avoid damaging wooden trim pieces, wipe
the trim with a clean sponge or soft cloth and warm water. Do
not use detergent or immerse the entire rack into water when
cleaning.
Using a clean sponge or soft cloth and a mild detergent
dissolved in warm water, hand wash and rinse thoroughly the
removable parts and interior surfaces. Dry with a soft cloth.
■ Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
■ To help remove odors, you can wash interior walls with
a mixture of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
111111111111111111111111
4. Wash stainless steel and painted metal exteriors with a clean
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
sponge or soft cloth and a mild detergent in warm water. Do
not use abrasive or harsh cleaners, or cleaners containing
chlorine. These can scratch or damage materials. Dry
thoroughly with a soft cloth.
NOTE: To keep your stainless steel wine cellar looking like
new and to remove minor scuffs or marks, it is suggested that
you use the manufacturer’s approved Stainless Steel Cleaner
and Polish. To order the cleaner, see “Accessories.”
IMPORTANT: This cleaner is for stainless steel parts only.
Do not allow the Stainless Steel Cleaner and Polish to come
into contact with any plastic parts such as the trim pieces,
dispenser covers or door gaskets. If unintentional contact
does occur, clean plastic part with a sponge and mild
detergent in warm water. Dry thoroughly with a soft cloth.
5. Replace the racks.
6. Clean the condenser coils regularly. They are located behind
the base grille. Coils may need to be cleaned as often as
every other month. This may help save energy.
■ Remove the base grille. See “Base Grille.”
■ Use a vacuum cleaner with an extended attachment to
clean the condenser coils when they are dusty or dirty.
■ Replace the base grille.
7. Plug in wine cellar or reconnect power.
Vacation and Moving Care
Vacations
If you choose to turn the wine cellar off before you leave, follow
these steps.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar.
3. Clean the wine cellar. See “Cleaning.”
4. Tape a rubber or wood block to the top of the door to prop it
open far enough for air to get in. This stops odor and mold
from building up.
Moving
When you are moving your wine cellar to a new home, follow
these steps to prepare it for the move.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar.
3. Clean, wipe, and dry it thoroughly.
4. Take out all removable parts, wrap them well, and tape them
together so they don’t shift and rattle during the move.
5. Tape the doors shut and tape the power cord to the wine
cellar.
When you get to your new home, put everything back and refer to
the “Installation Instructions” section for preparation instructions.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Your wine cellar will not operate
■ Is the power supply cord unplugged? Plug into a grounded
3 prong outlet.
■ Has a household fuse blown, or has a circuit breaker
■ Is the Wine Cellar Control turned to the OFF position?
121212121212121212121212
tripped? Replace the fuse or reset the circuit.
See “Using the Control.”
The lights do not work
■ Is the power supply cord unplugged? Plug into a grounded
3 prong outlet.
■ Your wine cellar is equipped with LED lighting which does not
need to be replaced. If there is power to the wine cellar and
the lights do not illuminate when the door is opened, call for
service or assistance.
The motor seems to run too much
■ Is the temperature outside hotter than normal? Expect
the motor to run longer under warm conditions. At normal
temperatures, expect your motor to run about 40% to 80%
of the time. Under warmer conditions, expect it to run even
more of the time.
■ Is the door opened often? Expect the motor to run longer
when this occurs. In order to conserve energy, try to get
everything you need out of the wine cellar at once, keep wine
bottles positioned label side up so that they are easy to find,
and close the door as soon as the wine is removed.
■ Is the control set correctly for the surrounding
conditions? See “Using the Control.”
■ Is the door closed completely? Push the door firmly shut.
If it will not shut all the way, see “The door will not close
completely” later in this section.
■ Are the condenser coils dirty? This obstructs air transfer
and makes the motor work harder. Clean the condenser coils.
See “Cleaning.”
Temperature is too warm
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
■ Is the door opened often? Be aware that the wine cellar will
warm when this occurs. In order to keep the wine cellar cool,
try to get everything you need out of the wine cellar at once,
keep wine bottles positioned label side up so that they are
easy to find, and close the door as soon as the wine is
removed.
■ Is the control set correctly for the surrounding
conditions? See “Using the Control.”
■ Is the base grille blocked? For best performance, do not
install the wine cellar behind a cabinet door or block the
base grille.
There is interior moisture buildup
The door is difficult to open
■ Is the door opened often? To avoid humidity buildup, try to
get everything you need out of the wine cellar at once, keep
wine bottles positioned label side up so that they are easy to
find, and close the door as soon as the wine is removed.
When the door is opened, humidity from the room air enters
the wine cellar. The more often the door is opened, the faster
humidity builds up, especially when the room itself is very
humid.
■ Is it humid? It is normal for moisture to build up inside the
wine cellar when the air is humid.
■ Is the control set correctly for the surrounding
conditions? See “Using the Control.”
■ Is the gasket dirty or sticky? Clean the gasket and the
surface that it touches. Rub a thin coat of paraffin wax on
the gasket following cleaning.
The door will not close completely
■ Are the racks out of position? Put the racks back into their
correct positions. See “Wine Cellar Use” for more
information.
■ Is the gasket sticking? Clean the gasket and the surface
that it touches. Rub a thin coat of paraffin wax on the gasket
following cleaning.
■ Is the door installed properly? If the door was reversed
improperly, re-installation may be required. See “Reverse
Door Swing.”
131313131313131313131313
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If You Need Replacement Parts
If you need to order replacement parts, we recommend that you
only use factory specified replacement parts. Factory specified
replacement parts will fit right and work right because they are
made with the same precision used to build every new Whirlpool
appliance.
To locate factory specified replacement pa
or your nearest designated service center.
In the U.S.A.
Call the Whirlpool Customer eXperience Center toll free:
1-800-253-1301.
Our Consultants Provide Assistance With:
Features and specifications on our full line of appliances.
Installation information.
Use and maintenance procedures.
Accessory and repair parts sales.
Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool designated service technicians
are trained to fulfill the product warranty and provide afterwarranty service, anywhere in the United States.
To locate the Whirlpool designated service company in your area,
you can also look in your telephone directory Yellow Pages.
For Further Assistance
If you need further assistance, you can write to Whirlpool with
any questions or concerns at:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
rts in your area, call us
In Canada
Call the Whirlpool Canada Customer eXperience Centre toll free:
1-800-807-6777, or visit our website at www.whirlpool.ca.
Our Consultants Provide Assistance With:
Scheduling of Service. Whirlpool designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service anywhere in Canada.
Features and specifications on our full line of appliances.
®
Referrals to local dealers.
Use and maintenance procedures.
Accessory and repair parts sales.
For Further Assistance
If you need further assistance, you can write to Whirlpool Canada
with any questions or concerns at:
Whirlpool Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
Accessories
The following accessory is available for your wine cooler. To order
accessory, contact us and ask for the part number.
In the U.S,A., visit our webpage
or call
1-800-253-1301
In Canada, visit our webpage www.whirlpoolparts.ca or call
1-800-807-6777.
.
Stainless Steel Cleaner & Polish
Order Part #4396095
www.whirlpool.com/accessories
141414141414141414141414
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.