Whirlpool WTW8100BW0, WTW8500BW0, WTW8500BR0, WTW8500BC0, WTW8000BW0 Owner’s Manual
Whir ®
cabr,d
TOP-LOADING
HIGH EFFICIENCY
LOW-WATER WASHER
USE AND CARE GUIDE
Table of Contents
WASHER SAFETY ......................................................... 2
WHAT'S NEW UNDER THE LiD? ................................. 3
CONTROL PANELAND FEATURES......................................4
Dispensers.......................................................................5
CYCLE GUIDE ............................................................... 6
USING YOUR WASHER ................................................ 8
WASHER MAINTENANCE ..............................................11
TROUBLESHOOTING ...................................................... 13
WARRANTY ........................................................................18
ASSISTANCE OR SERVICE ...........................Back Cover
LAVEUSE HAUTE
EFFICACITI_ A FAIBLE
CONSOMMATION D'EAU
AVEC CHARGEMENT
PAR LE DESSUS
GUIDE D'UTILISATION
ET D'ENTRETIEN
Table des matibres
S¢:CURIT¢:: DE LA LAVEUSE ...................................... 19
QUOI DE NEUF SOUS LE COUVERCLE? ................ 20
TABLEAU DE COMMANDE
ET CARACTC:RISTIQUES .......................................... 21
Distributeurs..................................................................22
GUIDE DES PROGRAMMES ...................................... 23
UTILISATION DE LA LAVEUSE .................................. 26
ENTRETIEN DE LA LAVEUSE ........................................ 30
DI_PANNAGE ...................................................................... 32
GARANTIE .......................................................................... 39
ASSISTANCE OU SERVICE ..............Couverture artiste
W10550271 B
W10550272B =SP
Para una version en espanol, visite www.whirlpool.com
Designed to use only HE High Efficiency
detergents.
Congue uniquement pour une utilisation
avec des d6tergents HE Haute efficacit6.
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry=cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry=cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
this time.
SAVE THESE INSTRUCTIONS
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach intothe washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where itwill be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" located inthe installation
instructions for grounding instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
2
WHAT'S NEW UNDER THE LID?
Cleaning with Less Water
Traditional agitator-style
washer
The most striking difference in your new washer is the low-water
washplate wash system. The washer automatically adjusts the
water level to the load size--no water level selector is needed.
Low-water washer
Automatic Load Size Sensing
Once you start the cycle, the lid will lock, and the washer will
begin the sensing process to determine the correct water level
for the load.
You will hear the motor turn the basket in short pulses to
thoroughly wet the load. This low-water wash method uses
less water and energy compared to a traditional agitator-style
washer.
Choosing the Right Detergent
Use only High Efficiency detergents. The package will be
marked "HE" or "High Efficiency." Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using
regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
Use only High Efficiency (HE) detergent.
Load garments in loose heaps evenly around the washplate.
Do not load garments directly over the center of the washplate;
when loaded, the center of the washplate should be visible.
As the washer dampens and moves the load, the level of the
garments will settle in the basket. This is normal, and does not
indicate that more garments should be added.
IMPORTANT: You will not see a washer basket full of water
as with your past agitator-style washer. It is normal for some of
the load to be above the water line.
Concentrated Cleaning
Low-water cleaning means concentrated cleaning. Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils.
Normal Sounds You Can Expect
At different stages of the wash cycle, you may hear sounds and
noises that are different from those of your previous washer.
For example, you may hear a clicking and hum at the beginning
of the cycle, as the lid lock goes through a self-test. There
will be different kinds of humming and whirring sounds as the
washplate moves the load. And sometimes, you may hear
nothing at all, as the washer determines the correct water level
for your load or allows time for clothes to soak.
ACTIVE WEAF
DELICATE
Spin Was_ Extra Fabric
Speed TemD Rinse Softener
Not all features and cycles are available on all models.
DII
Warm Cycl
II
Cool _ N_ _
[J Cold EcoBoost U
O POWER BUTTON
Press to turn the washer ON. Pressing once while the
washer is on will cancel the current cycle. Pressing twice
will turn the washer OFR
WASH CYCLE KNOB
Turn the Wash Cycle knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles.
TIME/STATUS DISPLAY
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load size
and water pressure may affect the time shown in the display.
Overloading, unbalanced loads, or excessive suds may
cause the washer to adjust the cycle time, as well.
If you have set a delay start to the cycle, the Estimated
Time Remaining display will show the delay time adjusted.
When the cycle is complete, the DONE indicator will light
until the lid is opened.
The Lid Lock indicator lights up when the lid is locked
and cannot be opened. Ifyou need to open the lid, press
START/PAUSE. The lid will unlock once the washer
movement has stopped. This may take several minutes
if the load was spinning at high speed. Press START/PAUSE
again to restart the cycle.
ECO MONITOR
O
Your washer is specially designed to conserve energy
and water. Each cycle, along with any selected options,
will result in different energy and water usage. To use the
Eco Monitor, choose the best cycle for the load being
washed, then adjust temperature and spin speed options
to improve the energy usage within that cycle.
START/PAUSE BUTTON
Press to start the selected cycle; press again to pause
a cycle.
CYCLE SIGNAL BUTTON
Use this option to adjust volume of the signal that sounds
at end of cycle. A louder signal is helpful in removing items
as soon as cycle is complete.
CYCLE OPTIONS
You may add or remove options for each cycle. Note that
not all options can be used with all cycles, and some are
preset to work with certain cycles.
ECOBOOST TM option
The EcoBoost TM option allows you to increase your energy
savings on your wash cycles. When this option is used,
the wash cycle will use cooler wash water than the
selected cycle and may increase the spin speed for
faster drying.
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
FABRIC SOFTENER DISPENSER
Press this button to set the Fabric Softener dispenser to
automatically add liquid fabric softener to the load at the
correct time.
CYCLE MODIFIERS
Whenyou select a cycle, its default settings will light up.
SOIL LEVEL
Soil level (wash time) is preset for each wash cycle. As
you press the Soil Level pad, the cycle time (minutes) will
increase or decrease in the Estimated Time Remaining
display and a different wash time will appear.
For most loads, use the soil level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, press SOIL LEVEL to select more wash time, if
needed. For lightly soiled and delicate fabrics, press SOIL
LEVEL to select less wash time, if needed. A lower soil
level setting will help reduce tangling and wrinkling.
SPIN SPEED
This washer automatically selects the spin speed based
on the cycle selected. The preset speeds can be
changed. Not all spin speeds are available with all cycles.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds mean less wrinkling, but will leave
your load more damp.
4
WASH TEMP
Temperature Control senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
• Warm and hot water may be cooler than what your
previous washer provided.
Even for cold wash settings, some warm water may
be added to the washer to maintain a minimum
temperature.
Dispensers
To turn Button Sounds either On or Off:
While washer is off (before pressing Power button), press
the following buttons within 5 seconds: Wash Temp -
Cycle Signal - Wash Temp - Cycle Signal. Washer will
make a single beep when the process is complete.
NOTE:
Cycle Signal Button will still operate, even if you turned
the button sounds off.
Whatever your preferences are, they remain in effect
through a power loss.
Default setting sounds is turned On.
High Efficiency "HE" detergent dispenser
Add liquid or powdered HE detergent to this dispenser for
your main wash cycle.
Use only High Efficiency (HE) detergent.
Liquid chlorine bleach dispenser
This dispenser holds up to 3/4 cup (180 mL) liquid chlorine
bleach. The bleach will be automatically diluted and
dispensed at the optimum time during the the wash cycle.
This dispenser cannot dilute powdered bleach.
NOTE: Fill dispenser only with liquid chlorine bleach.
Liquid fabric softener dispenser
Pour measured liquid fabric softener into the liquid fabric
softener dispenser, if desired. It will dispense automatically
at the optimum time when the Fabric Softener option is
selected.
Use only liquid fabric softener in this dispenser.
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle.
For best fabric care, choose the cycle that best fits the load being washed.
If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage.
Not all cycles and options are available on all models.
Lightly soiled
garments
Machine-wash silks,
hand-wash fabrics
and wool
Athletic and
high-performance
wear
Normally soiled
sheets
No-iron fabrics
Cottons, linens,
and mixed garment
loads
Bright or darkly
colored cottons,
linens, casual and
mixed loads
Large items such as
sleeping bags, small
comforters, jackets
Sturdy fabrics,
colorfast items
Soiled white fabrics
Quick
Wash
Handwash
Delicate
Active
Wear
Sheets
Perm
Press
Casual
Normal
L . Cold _ _ Light l
Cold Wash
Bulky
Items
Heavy
Duty
Whites Hot
Hot
Wa rm
Cool
Cold
Warm
Cool
Cold
Hot
War m
Cool
Cold
Hot
War m
Cool
Cold
Hot
War m
Cool
Cold
Hot
Wa rm
Cool
Cold
Hot
Wa rm
Cool
Cold
Hot
War m
Cool
Cold
Warm
Cool
Cold
High
Medium
Low
Medium
Low
High
Medium
Low
High
Medium
Low
High
Medium
Low
High
Medium
High
Medium
Low
Medium
Low
High
Medium
Low
High
Medium
Low
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal**
Medium
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Extra Rinse
Fabric Softener
Extra Rinse
Fabric Softener
Extra Rinse
EcoBoost TM
Fabric Softener
Extra Rinse
EcoBoost TM
Fabric Softener
Extra Rinse
EcoBoost TM
Fabric Softener
Extra Rinse
EcoBoost TM
Fabric Softener
Extra Rinse
EcoBoost TM
Fabric Softener
Extra Rinse
EcoBoost TM
Fabric Softener
Extra Rinse
EcoBoost TM
Fabric Softener
Extra Rinse
EcoBoost TM
Fabric Softener
Use this cycle to wash small loads of
2-3 lightly soiled garments that are
needed in a hurry. This cycle combines
a fast agitation, a shortened wash
time, and a high-speed spin to shorten
drying times.
Use this cycle for machine-washable
delicate garments. This cycle uses
intermittent wash action with cool
water and slow spin to gently care for
fine washables and avoid shrinkage.
Place small items in mesh bags before
washing.
Use this cycle to wash loads of no-iron
fabrics such as sport shirts and other
active wear.
Use this cycle to wash bed sheets. This
cycle uses extra water and a special
wash action to reduce tangling.
Use this cycle for lightly soiled office
wear. The cycle uses a warm wash, a
cooldown, and medium spin speeds
for better wrinkle performance.
Use this cycle to clean normally soiled
cottons and mixed fabric loads. Default
settings can be adjusted as needed.
I This cycle uses cold water wash and
a concentrated detergent solution
to gently lift out stains and care for
fabrics. Settings may be adjusted as
desired, but must use only cold water
settings.
I This cycle is designed for oversized
items that do not easily absorb water,
such as comforters, pillows, and poly-
filled jackets. The cycle uses an initial
soak to thoroughly saturate the item(s).
Use this cycle for heavily soiled or
sturdy cotton items. This cycle
combines high-speed wash action,
longer wash time, and extra high-
speed spin to shorten drying times.
i Adjust temperature settings as needed.
i This cycle adds liquid chlorine bleach
to the load at the proper time for
improved whitening of soiled white
fabrics.
* Wash temperatures vary according to the chosen cycle setting. All cycle settings use a cold rinse temperature.
** Not all models default to the same Soil Level setting. Some models will default to Medium on this cycle.
6
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle.
For best fabric care, choose the cycle that best fits the load being washed.
If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage.
Not all cycles and options are available on all models.
No clothes in
washer
Heavily soiled
fabrics
For models with separate cycle knob positions for Rinse & Spin and Drain & Spin:
Swimsuits, items Rinse & High EcoBoost TM j This cycle uses a high-speed spin.
that need rinsing Spin Medium Fabric Softener For some fabrics, you may wish to
only Low set the spin speed to a lower setting.
Wet load of clothes Drain & High Use this cycle to spin excess water
For models with a Rinse/Drain & Spin cycle position:
Swimsuits, items Rinse/ High EcoBoost TM This cycle uses a high-speed spin.
that need rinsing D_-<.,_& Medium Fabric Softener For some fabrics, you may wish to
only Spin Low set the spin speed to a lower setting.
Wet load of clothes R _s_::,/ High To select, choose Rinse/Drain & Spin
* Washtemperatures vary according to the chosen cycle setting. All cycle settings use acold rinse temperature.
Clean
Washer
with
affresh®
Soak Warm
Cool
Cold
Spin Medium out of a load. This cycle drains the
Low water and spins at a high speed. Spin
Drain & Medium and turn off Extra Rinse. Use this cycle
Spin Low to spin excess water out of a load. This
Heavy
Normal
Medium
Light
EcoBoost TM
EcoBoost TM
Use this cycle every 30 washes to keep
the inside of your washer fresh and clean.
i This cycle uses a higher water level. Use
with affresh®Washer Cleaner tablet or
liquid chlorine bleach to thoroughly clean
the inside of your washer. This cycle
should not be interrupted. See "Washer
Care."
IMPORTANT: Do not place garments
or other items in the washer during the
Clean Washer with affresh ®cycle. Use
j this cycle with an empty wash tub.
Use this cycle to soak small spots
of set-in stains on fabrics. After time
has expired, washer will drain, but
will not spin and a tone will sound. To
set a follow-up cycle, add additional
detergent and select a cycle based on
fabric type.
speed is adjustable.
cycle drains the water and spins at a
high speed. Spin speed is adjustable.
USING YOUR WASHER
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything thai has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
1, Sort and prepare your laundry
* Empty pockets. Loose change, buttons, or any small
object can pass under the washplate and become trapped,
causing unexpected sounds.
. Sort garments by recommended cycle, water temperature,
and colorfastness.
. Separate heavily soiled garments from lightly soiled.
. Separate delicate garments from sturdy fabrics.
. Do not dry garments if stains remain after washing; heat
can set stains into fabric.
. Treat stains promptly.
. Close zippers, fasten hooks, tie strings and sashes.
Remove non-washable trim and ornaments.
. Mend rips and tears to avoid further damage to garments
during washing.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Add laundry products
Add a measured of amount of detergent or single-dose
laundry packet into the basket.
If using Oxi-type boosters, color-safe bleach, or fabric
softener crystals, add to the bottom of the washer basket
before adding clothes.
NOTE: Follow the manufacturer's instructions to determine
the amount of laundry products to use.
Helpful Tips:
* When washing water-proof or water-resistant items, load
evenly. See "Cycle Guide" for tips and more information
on using the Bulky Items cycle.
. Use mesh bags to help prevent tangling when washing
delicate or small items.
. Turn knits inside out to avoid pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics
will pick up lint from towels, rugs, and chenille fabrics.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
8
Load garments in loose heaps evenly
around the washplate. Do not load
garments directly over the center
of the washplate; when loaded, the
center of the washplate should be
visible. Try mixing different sized garments to reduce tangling.
iMPORTANT: Garments need to move freely for best cleaning
and to reduce wrinkling and tangling.
NOTE:Donotaddsingle-doselaundrypackets,color-safe
bleach,Oxi-typeboosters,orfabricsoftenercrystalsto
dispensers.Theywillnotdispensecorrectly.
Detergent dispenser
k_./
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT: Use only High Efficiency detergents. The
package will be marked "HE" or "High Efficiency." Low-water
washing creates excessive sudsing with a regular non-HE
detergent. Using regular detergent will likely result in longer
cycle times and reduced rinsing performance. It may also
result in component failures and noticeable mold or mildew.
HE detergents are made to produce the right amount of
suds for the best performance. Follow the manufacturer's
instructions to determine the amount of detergent to use.
HELPFUL TIP: See "Washer Maintenance" for information on
recommended method of cleaning washer dispensers.
to dispenser
On
off
Pour a measured amount of liquid Softener
fabric softener into dispenser; always Dispenser
follow manufacturer's directions for correct
amount of fabric softener based on your load size.
Then select Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle.
Do not overfill or dilute. Overfilling dispenser will cause
fabric softener to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed in the last rinse.
NOTE: Do not use liquid fabric softener dispenser balls
in this washer. They will not dispense correctly.
Fabric
5, Add liquid chlorine bleach
to dispenser
Do not overfill, dilute, or use more than 3/4 cup (180 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
, Press POWER to turn on washer
POWER
Press and hold POWER to turn on the washer.
8. Select cycle
p_,,r,,_ _ NORMAL
& SPIN with _,_
Est Time Remaining
Done
Turn cycle knob to choose :'
your wash cycle. Estimated
Time Remaining will light DelayWash Id Lock
up with a cycle time. You
may notice time adjusting during the cycle. This is normal.
If you do not want to begin a cycle immediately, you may
choose the DELAY WASH option.
To choose a delay time:
1. Press DELAY WASH button to select desired delay time.
2. Press START/PAUSE to set the delay. The delay countdown
has started when the START/PAUSE light stops blinking.
To cancel delaying a cycle:
1. Press START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
Wash Temp Suggested Fabrics
Hot
Some cold water is added Whites and pastels
to save energy. This will be Durable garments
cooler than your hot water
heater setting. Heavy soils
Warm
Some cold water will be Bright colors
added, so this may be cooler Moderate to light soils
than what your previous
washer provided.
Cool
Warm water is added to assist Dark colors that
in soil removal and to help bleed or fade
dissolve detergents. Light soils
Cold
Warm water may be added to Dark colors that
assist in soil removal and to bleed or fade
help dissolve detergents. Light soils
F10. Select cycle options
Softener
Dispenser
On
EcoBoost Off
Extra Fabric
Rinse
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These may be turned off,
if desired.
NOTE: Not all options are available with all cycles.
9. Select cycle modifiers, if desired
Heavy
Normal
Medium
Light
:]High :Warm
ilMediurn _Co ol
ULow UCold
_iHot
@
Soil
Level
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle modifiers buttons to change the Soil
Level, Spin Speed, and Wash Temp, if desired. Not all settings
are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Spin Wash
Speed Temp
F1 1. Press START/PAUSE to begin
wash cycle
START
Pause
....'9
Press the START/PAUSE button to start the wash cycle.
When the cycle has finished, the DONE indicator will light and
the end of cycle signal will sound (if set). Promptly remove
garments when cycle is done to avoid odor, reduce wrinkling,
and rusting of metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/PAUSE again to restart the cycle.
If lid is left open for more than 10 minutes the water will
pump out.
10
WASHER MAINTENANCE
WATER iNLET HOSES
f
WASHER CARE (cont.)
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of
replacement on the label with a permanent marker.
NOTE: This washer does not include inlet hoses.
See the Installation Instructions for more information.
WASHER CARE
Recommendations to Help Keep Your Washer Clean
and Performing at its Best
1. Always use High Efficiency (HE) detergents and follow the
HE detergent manufacturer's instructions regarding the
amount of HE detergent to use. Never use more than the
recommended amount because that may increase the
rate at which detergent and soil residue accumulate inside
your washer, which in turn may result in undesirable odor.
2. Use warm and hot wash water settings sometimes (not
exclusively cold water washes), because they do a better
job of controlling the rate at which soils and detergent
accumulate.
3. Always leave the washer lid open between uses to
help dry out the washer and prevent the buildup of
odor-causing residue.
Cleaning Your Top Loading Washer
Read these instructions completely before beginning the
routine cleaning processes recommended below. This
Washer Maintenance Procedure should be performed,
at a minimum, once per month or every 30 wash cycles,
whichever occurs sooner, to control the rate at which soils
and detergent may otherwise accumulate in your washer.
Cleaning the Inside of the Washer
To keep your washer odor-free, follow the usage instructions
provided above, and use this recommended monthly
cleaning procedure:
Clean Washer Cycle
This washer has a special cycle that uses higher water
volumes in combination with affresh ®Washer Cleaner
or liquid chlorine bleach to clean the inside of the washer.
Begin procedure
1. affresh ®Washer Cleaner Cycle Procedure
{Recommended for Best Performance):
a. Open the washer lid and remove any clothing or items.
bo Place an affresh ®Washer Cleaner tablet in the bottom
of the washer basket.
co Do not place an affresh ®Washer Cleaner tablet
in the detergent dispenser.
d. Do not add any detergent or other chemical to the
washer when following this procedure.
eo Close the washer lid.
fo Select the CLEAN WASHER cycle.
go Press the START/PAUSE button to begin the cycle. The
Clean Washer Cycle Operation is described below.
NOTE: For best results, do not interrupt cycle. If cycle
must be interrupted, press POWER/CANCEL. (For models
with no Power/Cancel button, press and hold START/
PAUSE for three seconds). After the Clean Washer cycle
has stopped, run a Rinse/Drain & Spin cycle to rinse
cleaner from washer.
2.
Chlorine Bleach Procedure {Alternative):
ao Open the washer lid and remove any clothing
or items.
bo Add 1 cup (236 mL) of liquid chlorine bleach
to the bleach compartment.
NOTE: Use of more liquid chlorine bleach than is
recommended above could cause washer damage
over time.
co Close the washer lid.
d. Do not add any detergent or other chemical
to the washer when following this procedure.
eo Select the CLEAN WASHER cycle.
fo Press the START/PAUSE button to begin the cycle.
The Clean Washer Cycle Operation is described below.
NOTE: For best results, do not interrupt cycle. If cycle
must be interrupted, press POWER/CANCEL. (For models
with no Power/Cancel button, press and hold START/
PAUSE for three seconds). After the Clean Washer cycle
has stopped, run a Rinse/Drain & Spin cycle to rinse
cleaner from washer.
Description of Clean Washer Cycle Operation:
1. This cycle will fill to a water level higher than in normal
wash cycles to provide rinsing at a level above the water
line for normal wash cycle.
2. During this cycle, there will be some agitation and
spinning to increase the removal of soils.
After this cycle is complete, leave the lid open to allow
for better ventilation and drying of the washer interior.
Cleaning the Dispensers
After a period of using your washer, you may find some
residue buildup in the washer's dispensers. To remove
residue from the dispensers, wipe them with a damp cloth
and towel dry. Do not attempt to remove the dispensers or
trim for cleaning. The dispensers and trim are not removable.
If your model has a dispenser drawer, however, remove the
drawer and clean it before or after you run the Clean Washer
cycle. Use an all-purpose surface cleaner, if needed.
Cleaning the Outside of the Washer
Use a soft, damp cloth or sponge to wipe away any spills.
Use only mild soaps or cleaners when cleaning external
washer surfaces.
IMPORTANT: To avoid damaging the washer's finish, do not
use abrasive products.
11
r
NON=USE AND VACATION CARE
Operate your washer only when you are home.
If moving, or not using your washer for a period of time,
follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer, to avoid flooding
due to water pressure surge.
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets; disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and
run washer on RINSE/DRAIN & SPIN cycle for about
30 seconds to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3. Disconnect drain from drain system.
4. Unplug power cord.
5. Place inlet hoses inside washer basket.
6. Drape power cord and drain hose over the console
and secure with masking tape.
7. Place foam packing ring from original shipping materials
back inside washer. If you do not have packing ring,
place heaw blankets or towels into basket opening.
Close lid and place tape over lid and down front of
washer. Keep lid taped until washer is placed in
new location.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage
or moving:
1. Refer to Installation Instructions to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run washer through BULKY ITEMS cycle to clean
washer and remove antifreeze, if used. Use only HE
High Efficiency detergent. Use half the manufacturer's
recommended amount for a medium-size load.
12
Loading...