Whirlpool WTW57ESVH0, WTW5505VQ1, WTW5200VQ0, WTW5200VQ1, WTW58ESVW0 Owner’s Manual

...

WASHERUSERINSTRUCTIONS

INSTRUCTIONSD'UTILISATIONDELALAVEUSE

Tableof Contents

ACCESSORIES ................................................................................. 1

WASHERSAFETY............................................................................ 2

WASHERUSE .................................................................................. 3

WASHERCARE................................................................................ 5

TROUBLESHOOTING...................................................................... 6

WARRANTY...................................................................................... 8

If you need assistance or service, first see the "Troubleshooting" section. Additional help is available by calling our Customer eXperience Center at 1-800-253-1301 from anywhere in the U.S.A., or write:

Whirlpool Corporation

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

In Canada, for assistance, installation and service call, 1-800-807-6777, or write:

Customer Interaction Centre

Whirlpool Canada LP

1901 Minnesota Court

Mississauga, Ontario LSN 3A7

Information may also be obtained by visiting our website at

www.whirlpool.com. In Canada, visit www.whirlpool.ca.

Table des matii res

ACCESSOIRES ................................................................................. 10

SECURITE DE LAI_AVEOSE.......................................................... 11

OTIEISATION DE LALAVEOSE...................................................... 12

ENTRETIEN DE LALAVEOSE......................................................... 14

DEPANNAGE.................................................................................... 15

GARANTIE........................................................................................ 18

Please include a daytime phone number in your correspondence. Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation date for in-warranty service.

Write down the following information about your appliance to help you obtain assistance or service if you ever need it. You will need to know your complete model number and serial number. You can find this information on the model and serial number label, located under the washer lid.

Dealer name Serial number

Address Phone number

Model number Purchase date

Enhance your washer with these premium accessories.

For more high-quality items or to order, call 1-800-901-2042, or visit us at www.whirlpool.com/accessories.

Part Number Accessory Part Number Accessory

8212656RP 10 ft (3.0 m) Black EPDM (2 pack) 8212641RP 5 ft (1.5 m) Black EPDM (2 pack) 8212638RP 6 ft (1.8 m) Nylon braided space-saving inlet 8212546RP 4 ft (1.2 m) Black EPDM (2 pack)

hose, 90° elbow, hypro-blue steel couplings.

(2-pack) 8212487RP 5 ft (1.5 m) Nylon braided inlet hose. (2-pack) 8212526 Washer drip tray, fits under all 8212637RP 6 ft (1.8 m) Black EPDM, space saving 90° elbow, 31682 All purpose appliance cleaner

hypro-blue steel couplings. (2-pack) 8212545RP 5 ft (1.5 m) Red and Blue EPDM. (2-pack) 1903WH Laundry supply storage cart

This washer does not include inlet water hoses.

In Canada, call 1-800-807-6777 or visit us at www.whirlpoolparts.ca.

W10200828A

WASHERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:

You can be killed or seriously injured if you don't immediately_ follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer. [] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during

this time.

SAVE THESE INSTRUCTIONS

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls. [] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user=repair instructions that you understand and have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

WASHERUSE

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil. Do not dry anything that has ever had any type of oil on

it (including cooking oils). Doing so can result in death, explosion, or fire.

Measure detergent and pour it into the washer. If desired, add powdered or liquid color safe bleach.

Drop a sorted load of clothes loosely into your washer.

• Load evenly to maintain washer balance. Mix large and small items. Items should move easily through the wash

water. Load only to the top of the basket as shown. Overloading

can cause poor cleaning.

(OPTIONAL) Add liquid chlorine bleach. NOTE: Follow the garment and the chlorine bleach

manufacturers' directions for proper use. Undiluted bleach will damage any fabric it touches. The damage appears as rips,

holes, tears, or color loss and may not show up until several washings later. To avoid spilling, use a cup with a pouring spout. Do not let bleach splash, drip, or run down into the washer basket. Always measure liquid chlorine bleach. Do not

guess. Do not use more than the manufacturer's recommended amount for a full load. Use less with a smaller

load size. Style 1: With liquid chlorine bleach dispenser (on some

models)

Use only liquid chlorine bleach in this dispenser. Do not use this dispenser to add powdered chlorine or color-safe bleach to your load. Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser. Bleach is immediately fed into washer and is diluted automatically during the wash part of the cycle.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong.

Do not use an adapter. Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Style 2: Without liquid chlorine bleach dispenser (on some models)

Let the washer fill and begin agitating the load.

Add bleach 5 minutes into the wash cycle for best cleaning and so that bleach can be removed in the rinse cycle. Pour bleach around the agitator, not directly onto the load to avoid damaging clothing or other items in the

load.

(OPTIONAL) Add liquid fabric softener. NOTE: Do not spill or drip any fabric softener onto the clothes.

Undiluted fabric softener can stain fabrics. Always dilute fabric softener with warm water. Using too much fabric softener can

make some items (diapers and towels) nonabsorbent. If this happens, do not use it in every load, or use less of it in each

load. Style 1: With liquid fabric softener dispenser (on some

models)

Use only liquid fabric softener in this dispenser. Pour measured liquid fabric softener into the dispenser. Softener is added automatically during the rinse portion of the cycle. Dilute liquid fabric softener by filling the dispenser with warm water until liquid reaches the

underside of the rim. See max fill line arrows.

NOTE: If your washer has a Fabric Softener Switch (on some models), make sure to turn on this selection when using fabric softener.

Style 2: Without liquid fabric softener dispenser (on some models)

• In the final rinse only, add fabric softener that has been diluted with 1/2to 1 cup (125 to 250 mL) warm water.

Close the washer lid. Washer will not agitate or spin with the lid open.

Turn the LOAD SIZE or WATER LEVEL selector to the correct setting for your wash load and the type of fabric being washed

(on some models).

• You may change the load size or water level selection after the washer has started filling by turning the selector to a different setting.

• On models with a variable Load Size or Water Level control, you should turn the knob to RESET, then to

desired setting. Auto Water Level -This washer senses the load size and

composition through a series of fills and wash motion. It then adjusts the water level for the best cleaning and rinsing performance. It eliminates the guesswork. The water level is just right for every wash load size.

NOTE: To insure the washer calculates the proper water for the load size, do not open lid or stop the washer once the wash cycle has started.

NOTE: You may notice during a cycle that the wash load is not completely submerged in water. This is normal for your washer.

Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed. Use the warmest wash

water safe for the fabric. Follow garment label instructions. The Automatic Temperature Control (ATC) (on some models)

electronically senses and maintains a uniform water temperature by regulating incoming hot and cold water.

• Even in Cool wash, some warm water is let into the washer to maintain a minimum temperature.

Temperature Guide

Wash Temp Suggested Fabrics Hot Whites and pastels

Durable garments Heavy soils

You can customize your wash by adding rinse Options to your cycle selections. This knob has settings for:

• Extra Rinse - Selecting this option provides a second rinse. An Extra Rinse can be added to any wash cycle.

• Cycle Signal (on some models) - A tone will sound at the end of the cycle. The sound level cannot be adjusted.

• Extra Rinse & Cycle Signal (on some models) - This option combines both a Extra Rinse and a Cycle Signal at the end of the wash cycle.

Fabric Select (on some models). Each fabric setting is designed for different types of fabric and soil levels.

The Auto Load Sensing System (on some models) is an integrated set of controls which work together to provide

optimal wash temperatures, agitation times, and agitation/ spin speeds based on the Fabric Select setting. The controls provide higher wash temperatures for more aggressive,

heavy-duty cycles and slightly lower temperatures on cycles for delicate and hand wash items, to provide better fabric care. The timer knob allows you to decrease agitation time for light soils and increase agitation time for heavy soils.

10.

Push in the Timer knob and turn it clockwise to the wash cycle you want. Reduce the wash time when using a small

water level setting. Pull out the Timer knob to start the washer.

To stop or restart your washer:

• To stop the washer at any time, push in the Timer knob.

• To restart the washer, close the lid (if open) and pull out the Timer knob.

Warm Bright colors

Moderate to light soils

Cool brights/darks Colors that bleed or fade

Light soils

Cold Dark colors that bleed or fade

Light soils

Tap Cold Dark colors that bleed or fade

Light soils

NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils can be difficult to

remove. Some fabrics can retain wear wrinkles and have increased pilling (the formation of small lint-like balls on the surface of garments).

WASHERCARE

Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach from the outside of your washer.

Clean your washer interior by mixing 1 cup (250 mL) of chlorine bleach and enough detergent to equal twice the manufacturer's recommended amount for a normal wash load. Pour this mixture

into your washer and run it through a complete cycle using hot water. Repeat this process if necessary.

Remove any hard water deposits using only cleaners labeled as washer safe.

Cleaning the liquid fabric softener dispenser (on some models):

1. Remove dispenser by grasping top with both hands and squeezing, while pushing upward with thumbs.

2. Rinse dispenser under warm water, then replace it.

NOTE: Some models are equipped with a liquid fabric softener dispenser. To avoid damage to the washer or clothing, do not

wash clothes with the liquid fabric softener dispenser removed or add detergent or bleach to this dispenser; it is for liquid fabric softener only.

This washer does not include inlet washer hoses. Whirlpool Corporation recommends use of factory specified parts. A list of factory specified hoses available for separate purchase are listed on the first page of this user instructions. These hoses are manufactured and tested to meet Whirlpool Corporation's specifications.

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run the washer through a complete cycle with 1 cup (250 mL) of detergent to clean out antifreeze.

Storage, non-use, or vacation care

Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:

1. Unplug washer or disconnect power.

2. Turn off the water supply to the washer. This helps avoid flooding (due to a water pressure surge) while you are away.

Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing

weather, winterize it.

Winterizing your washer

1. Shut off both water faucets. Disconnect and drain water inlet hoses. Pour 1 qt (1 L) of R.V.-type antifreeze into the basket.

2. Run washer on a drain and spin setting for about 30 seconds to mix the antifreeze and remaining water.

3. Unplug washer or disconnect power.

To use washer again

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In U.S.A. www.whirlpool.com In Canada www.whirlpool.ca

Noisy

Is the load balanced and the washer level? The wash load

should be balanced and not overloaded. The washer must be level. The front feet should be properly installed and the nuts tightened. Reset the rear leveling legs (if needed). See the

Installation Instructions.

Did you completely remove the yellow shipping strap with shipping pins? See the Installation Instructions.

Are the gears engaging after the drain and before spin, or is the upper part of agitator clicking during wash? These

are normal washer noises.

Leaking

Check the following:

Are the fill hoses tight? Are the fill hose washers properly seated? Is the drain hose clamp properly installed? See the Installation

Instructions. Is the sink or drain clogged? Sink and standpipe must be

able to handle 17 gal. (64 L) of water per minute. Is water deflecting off the tub ring or the load? Center the

tub before starting the washer. The wash load should be balanced and not overloaded. The fill or spray rinses can

deflect off the load. The washer must be level. The front feet should be properly installed and the nuts tightened. Reset the rear leveling legs (if needed). See the Installation Instructions.

• Check household plumbing for leaks.

Basket crooked

Was the washer basket pulled forward during loading?

Push the basket to the center before starting wash. Is the load balanced and the washer level? The wash load

should be balanced and not overloaded. The washer must be level. The front feet should be properly installed and the nuts

tightened. Reset the rear leveling legs (if needed). See the Installation Instructions.

• The washer basket moves while washing. This is normal.

Agitator operation

• The top of the agitator is loose, or moves in only one direction. This is normal.

Dispensers clogged or bleach leaking

• Did you follow the manufacturer's directions when adding detergent and fabric softener to the dispensers (on some

models)? Measure detergent and fabric softener. Slowly pour into the dispensers. Wipe up all spills. Dilute fabric softener in the fabric softener dispenser.

Did you put powdered or color-safe bleach into the liquid chlorine bleach dispenser (on some models)? Add powdered or liquid color-safe bleach directly to the basket. Do not use the chlorine bleach dispenser for color-safe bleach.

Washer won't run, fill,rinse, or agitate; washer stops

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Fai(ure to follow these instructions can result in death,

fire, or electrical shock.

Is the power cord plugged into a grounded 3 prong outlet? Plug power cord into a grounded 3 prong outlet.

Are you using an extension cord? Do not use an extension cord.

Is the indicator on the Timer knob properly lined up with a cycle? Turn the Timer knob to the right slightly and pull to

start. Are the water inlet valve screens clogged? Turn off the

water and remove inlet hoses from the washer. Remove any accumulated film or particles. Reinstall hoses, turn on water

and check for leaks. Are both the hot and cold water faucets turned on? Turn

on the water. Is the water inlet hose kinked? Straighten the hoses.

Does the water level seem too low, or does the washer appear to not fill completely? The top of the agitator is much

higher than the highest water level. This is normal and necessary for clothes to move freely.

Has a household fuse blown, or has a circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the

problem continues, call an electrician. Is the washer in a normal pause in the cycle? The washer

pauses for about 2 minutes during certain cycles. Allow the cycle to continue. Some cycles feature periods of agitation

and soak. Is the washer overloaded? Wash smaller loads.

Is the lid open? The lid must be closed during operation. Washer will not agitate or spin with the lid open.

Washer won t drain or spin

• is the drain hose clogged, or the end of the drain hose more than 96" (244 cm) above the floor? See the Installation

Instructions for proper installation of drain hose.

+ 14 hidden pages