Whirlpool WTV45362 NFC TS, WTV4536 NFC IX, KDN 4382 A2 PT INSTRUCTION FOR USE

A. Control panel

B. Freezer Compartment

1. Ice tray

2. Plastic shelves

3. Area for freezing (with/without flap)

4. Area for storing frozen foods

5. The freezer door tray for pizza or other frozen

products with a short storage time (2** storage
compartment)

6. Door seals

C. Refrigerator Compartment

7. Lighting

8. Filter in fan
8a. button of fan
8b. cover of fan

9. Shelves / Shelf area

10. Multi-flow cold air system

11. Cooler compartment (best for meat and fish)

12. Rating plate with commercial name

13. Fruits and vegetables crisper
13a. Crisper divider

14. Reversibility kit

15. Separator

16. Door trays

Anti-bacterial protection (depending on the model):

- Antibacterial filter in the fan (8)

- Antibacterial additives in the Crisper (13)

- Door seals are made of material able to inhibit bacterial

growth (6).

Notes:

- Depending on the model the number and type of

accessories may vary.

- In case it'll have a freezer flap, please remember that to

maximize the storage volume it's suggested to remove
flap by bending it.

- All shelves and door trays are removable.

- The internal temperatures of the appliance depend on

the ambient temperature, frequency of opening the
doors, as well as location of the appliance. Temperature
setting must consider these factors.

- The appliance accessories are not suitable for washing in

dishwasher.

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the
operation automatically.
After starting the appliance, wait at least 4-6 hours before
placing food into the appliance.
Particular control elements are activated:

• The indicator LEDs on the control panels light up for 2
seconds.

• Activation of a beep for 1 second.

Note:

• If food is placed in the refrigerator before the appliance
has cooled completely, it may deteriorate.

CONTROL PANEL

(1) Cavity selection "Fridge / Freezer" pushbutton
(2) Green LED ON/OFF informing of:

- freezer cabinet temp. setting (green LED light ON)

- fridge cabinet temp. setting - (green LED light OFF)

(3) Temperature selection button "Temp.".
(4) (5) (6) Green LEDs indicating temperature settings.
(7) "Stop alarm" pushbutton.

TEMPERATURES ADJUSTMENT

Temperature adjustment between cabinets is made with
the "Fridge / Freezer" button (1).
When the LED (2) is OFF the user can select
temperature in the fridge.
When the LED (2) is ON the user can select temperature
in the freezer.
The temperature in the refrigerator and freezer
compartment may be set by the temperature setting
pushbutton (3) on the control panel.
On the left there are described the 5 set points for the
refrigerator and freezer compartment.At each short
pressure of the "Temp." button (3), the setpoint will
change (cyclically).

Legend: LED OFF LED ON

The medium temp. is the recommended temperature
settings.

PRODUCT SHEET

GB

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

UKR CAROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

FAN WITH A BUTTON (depending on the model)

The fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the "6th
Sense Fresh Control" function can work properly and also
when the ambient air temperature is over 27 ÷ 28°C or if
you perceive drops of water on the glass shelves or in the
severe humidity conditions.

Note

Do not obstruct the air intake area with food items.
To optimize energy consumption and to guarantee the
right performance at lower ambient temperature (colder
than 18°C) please turn off the fan.
To turn off the fan press the button (8a).

If the appliance has the fan it can be equipped with the
antibacterial filter.
Remove it from the box (found in the crisper drawer
(item 13) and insert into the cover of fan (item 8b).
The replacement procedure is attached with the filter.

FUNCTIONS

Fast Freezing

For more efficient freezing activate this function 24 hours
before freezing fresh products.

- Select Freezer compartment by using button (1), LED
(2) shall turn ON.

- Press and hold the temperature setting button Temp.
until 3 green LEDs light up simultaneously (4) (5) (6).

After 24 hours place the food to be frozen in the upper
basket of the freezer compartment.

This function is automatically disabled after 48
hours. To deactivate it earlier follow the procedure:

- Press and hold by 3 sec. the temperature setting button

Temp. again while the LED (2) is ON - the
temperature selection lights will return to previous

displayed temperature setpoint.
After setting the "Fast Freezing" (automatically disabled
after 48 hours) the freezer temperature sets previous
displayed setpoints. When the product is disconnected
from the power supply and then reconnected, the control
unit remembers previously set temperatures for freezer
and refrigerator.

Stop alarm

If any alarm appears, the user could reset the acoustical
sound by pressing once Stop alarm pushbutton.

"Black-out alarm" (power supply failure) - in case of
power failure, the appliance automatically monitors the
temperature changes in the freezer compartment after
the power supply returns. The "Black-out alarm" will
activate, if the temperature has risen above the admissible
level. This is indicated by:

- Flashing of the green LED (2)

- Acoustical alarm.
To deactivate the alarm, press once Stop alarm
pushbutton, the flashing of the green LED (2) go off.

- The temperature will return to the normal operating
cycle level and the beep will stop.

When the "Black-out alarm" is actived, it is
recommended to proceed as follows:

- If the food in the freezer is not frozen but is still cold,
transfer it promptly to the refrigerator compartment
and consume within 24 hours.

- If the food in the freezer is frozen, it has re-frozen after
thawing caused by the power failure. The consumption
of re-frozen food is not recommended because it has
lost its nutritive value and may be hazardous to your
health.

Note

The "Black-out alarm" does not guarantee the food quality
and its safety in case of consumption. It only indicates the
necessity to assess the quality of food in the freezer and
refrigerator compartments.

Overtemperature alarm in freezer compartment.
Overtemperature alarm activation is indicated by:

- Flashing of the green lamps (4) (5) (6).

- Acoustical alarm.

The alarm is activated when:

• The appliance is connected to the power supply for the

first time or after prolonged disuse.

• The freezer compartment temperature is too high.

• The quantity of foods loaded into the freezer exceeds

that indicated on the data plate.

• The freezer door has been left open for a long time.

To deactivate Acoustical alarm, press Stop alarm
pushbutton . The flashing LEDs (4) (5) (6) go off when
the minimum required temperature is reached.

"6th Sense Fresh Control"

This function allows optimum storage conditions
(regarding temperature and humidity) to be quickly
reached inside the appliance.
It is advisable to keep the fan active, so that the "6th
Sense Fresh Control" function can work properly.
To minimize the Energy consumption is suggested to
disable the fan.
To manually deactivate the function, press for at least 3
sec. both buttons Cavity selection "Fridge / Freezer" and
"Temp.". A long sound signal will be provided for the
deactivation of the feature . In order to reactivate this
function follow the same procedure (keeping pressed the
2 buttons for 3 sec.). A short sound signal will be provided
for the activation of the feature.

OTHER ABNORMAL APPLIANCE OPERATIONS
DISPLAYED BY LEDs

In case of abnormal appliance operation, all the
temperature selection LEDs will flash and one beep will
sound. To check the code alarm user have to press and
hold the temperature setting Temp. & Stop alarm
pushbuttons and alarm code will be showing on the

PRODUCT SHEET

GB

CAUKRROBGRUSHSKCZPLFINDKNSGRIPENLFGBD