Whirlpool WTC37462 A NFCX PRODUCT SHEET

PRODUCT SHEET

A. Refrigerator Compartment

2.LED's lighting

3.Shelves / Shelf area

4.Multi-flow cold air system

5.Cooler compartment

6.Rating plate with commercial name 7a. Crisper divider

8.Egg tray

9.Reversibility kit

10.Separator

11.Door trays

B. Freezer Compartment

12.Area for freezing (with/without flap)

13.Area for storing frozen foods

14.Ice tray

15.Plastic shelf

16.Ice-cube tray

17.The freezer door trays for pizza or other frozen products with a short storage time (2** storage compartment)

Depending on the model the number and type of accessories may vary.

C. Control panel and display

Anti-bacterial protection:

1.Filter in fan (depending on the model)

7.Crisper with antibacterial additives (depending on the model)

18. Door seals

The crisper and the door seals are manufactured from materials that inhibit bacterial growth.

Notes:

-All shelves and door trays are removable. Freezer plastic shelf cannot be removed to have a good air flow rate inside freezer compartment.

-The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance. Temperature setting must consider these factors.

-The appliance accessories are not suitable for washing in dishwasher.

HOW TO START THE APPLIANCE

Fit the spacers (if supplied) on the upper part of the condenser at the rear of the appliance. When the appliance is connected to the power supply, the display lights up and all the symbols appear on the display for a few seconds.

The freezer factory setting -18°C appears and flashes, while the refrigerator display shows a temperature of +5°C (factory-set). While the appliance is working to reach the factory-set temperature, an acoustic alarm sounds and temperature symbol on the freezer display flashes (- -). This indicates that the appliance has not yet reached the optimal temperature for storage of foodstuffs. Press and hold the button "Reset" until the acoustic alarm disables.

The icon disappears when the freezer compartment reaches a temperature below -12°C, the display will show the temperature -18°C.

After being switched on, the refrigerator needs from 4 to 6 hours to reach the correct temperature to store a typical volume of food in the refrigerator compartment.

Important:

•If food is placed in the refrigerator before the appliance has cooled completely, it may deteriorate.

•Turning the refrigerator and freezer controls to a colder than recommended setting will not cool the compartments any faster.

•A built-in exterior moisture control continuously guards against moisture build-up on the front edges.

Do not be alarmed if these edges sometimes feel warm to the touch. The inside light switches on when the refrigerator door is opened.

After 10 minutes of door opening the light switches off.

FAN WITH A BUTTON

The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. By default, the fan is ACTIVE.

It is advisable to keep the fan active, so that the "Fresh Control" / "ProFresh" function can work and also when the ambient air temperature is over 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions.

Note

Do not obstruct the air intake area with food items. When Fresh Control / ProFresh is disabled remember to turn off the fan when there is a lower ambient air temperature.

To turn off the fan press the button (1a).

If the appliance has the fan it can be equipped with the antibacterial filter.

Remove it from the box (found in the crisper drawer (item 7) and insert into the cover of fan (item 1b). The replacement procedure is attached with the filter.

FIN

RUS

PRODUCT SHEET

CONTROL PANEL DESCRIPTION

Buttons:

1.Options button

2.Setting temperature in freezer compartment button

3.Appliance On-Stand-by button

4.Confirmation button

5.Setting temperature in fridge compartment button

6.Reset button.

Switching on the appliance: Press & hold for 3 sec. the "On-Stand-by" button to activate the product.

Switching off the appliance: Press & hold for 3 sec. the "On-Stand-by" button again.

Adjusting the temperature: To change the temperature inside the refrigerator or freezer compartment, press the Freezer or Fridge button.

Displaying the refrigerator and freezer compartment temperatures.

The temperature inside the refrigerator compartment can be adjusted between +2°C and + 8°C. In the same way, the freezer compartment temperature can be adjusted between -16°C and -24°C.

GUIDE TO SELECTING FUNCTIONS

Functions and settings for the refrigerator compartment.

Fridge

Refrigerator compartment temperature setting.

Vacation

This function turns the refrigerator compartment to a warmer state if you are going away for some time.

To select the function, press the "Options" button several times, until the vacation symbol will blink, then press "OK" to confirm.

To turn the refrigerator back to setting point repeat this procedure. When the function is active fridge temperature display shows " - " symbol. Important: after activating this function, remove all perishable foodstuffs from the refrigerator compartment and leave the door closed, since the refrigerator maintains a suitable temperature to prevent the formation of unpleasant odours.

The freezer compartment will keep on working as usual also during the Vacation mode.

On-Stand-by

This function turns off both the refrigerator and freezer compartments.

To enable the stand-by function, press & hold the "On-stand-by" button for 3 seconds, hyphens appear on both display to indicate that the appliance is in stand-by.

To switch the appliance on again, follow the same procedure until the previously set temperature is shown on the display.

When the appliance is in stand-by the light inside the refrigerator compartment does not work. Remember that this operation does not disconnect the appliance from the power supply.

Fast Cooling

The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment.

To select the function, press the "Options" button several times, until the Fast Cooling symbol

will blink, then press "OK" to confirm. The function is automatically disabled after 6 hours, or can be manually disabled by repeating the same procedure.

Functions and settings for the freezer compartment

Freezer

Freezer compartment temperature setting.

Extra Load

The use of this function is recommended when placing a very high quantity of food to be frozen in the freezer compartment.

Activate this function 24 hours before freezing fresh food. To select the function, press the "Options" button just once, the Extra Load symbol will blink, then press "OK" to confirm.

After 24 hours place the food to be frozen in the upper basket of freezer compartment.

The function is automatically disabled after 48 hours, or can be manually disabled by repeating the same procedure.

Party Mode

To select the function, press the "Options" button several times, until the Party Mode symbol will blink, then press "OK" to confirm. Use this function to chill drinks inside the freezer compartment.

30 minutes after selection (the time required to chill a 0.75 l bottle without the glass breaking), the symbol flashes, an acoustic alarm sounds and the display lights up: remove the bottle from the freezer compartment and press the "Reset" button to disable the function.

Important: do not leave the bottle inside the freezer compartment longer than the time necessary for chilling.

FIN

RUS

+ 2 hidden pages