Side by Side Refrigerator
PRODUCT MODEL NUMBERS
WRS975SID
Electrical: A 115 volt, 60 Hz, AC only,
15- or 20-amp fused, grounded electrical
supply is required. It is recommended
that a separate circuit serving only your
refrigerator be provided. Use an outlet that
cannot be turned off by a switch. Do not use
an extension cord.
Water: A cold water supply with water
pressure of between 30 and 120 psi (207
and 827 kPa) is required to operate the
water dispenser and ice maker. If you have
questions about your water pressure, call a
licensed, qualified plumber.
Reverse Osmosis Water Supply:
IMPORTANT: The pressure of the water
supply coming out of a reverse osmosis
system going to the water inlet valve of the
refrigerator needs to be between 30 and
120 psi (207 and 827 kPa).
If a reverse osmosis water filtration system
is connected to your cold water supply,
the water pressure to the reverse osmosis
system needs to be a minimum of 40 to
60 psi (276 to 414 kPa).
PRODUCT DIMENSIONS
A
not incl.
handle
C
top of
cabinet
Model Size
24.8
B
incl.
handle
Depth
without
Handle
“A”
33C⁄v"
(85.7 cm)
Depth with
Handle
“B”
36¹⁄v"
(92.1 cm)
Cabinet
Height
“C”
68M⁄,"
(174.9 cm)
D
overall
Overall
Height
(175.3 cm)
“D”
69"
Cabinet
Width
“E”
36"
(91.4 cm)
E
F
90˚ 90˚
Depth “F”
with Doors
Open 90°
51¹⁄,"
(130 cm)
LOCATION REQUIREMENTS
1
/
2" (1.27 cm)
To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.27 cm) of space on each side
and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has
an ice maker, allow extra space at the back for the water line connections. When installing your
refrigerator next to a fixed wall, leave a 2" (5.08 cm) minimum space on each side (depending on
your model) to allow the doors to swing open.
NOTES:
n This refrigerator is intended for use in a location where the temperature ranges from a minimum
of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for
optimum performance, which reduces electricity usage and provides superior cooling, is
between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install
the refrigerator near a heat source, such as an oven or radiator.
n Normal minimum cabinet cut-out width required for product installation is 36” (91.44 cm).
However, if the product is placed against an extended wall and the ability to remove the crisper
pans is desired, an additional 18” (45.72 cm) of cabinet width is required, so a total cabinet
opening width of 54” (137.16 cm) is recommended.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10706411B
4/15