Whirlpool WRR56X18FW02 Owner’s Manual

User Guide

Refrigerator

THANK YOU for purchasing this high-quality product. Register your refrigerator at www.whirlpool.com. In Canada, register your refrigerator at www.whirlpool.ca.

For future reference, please make a note of your product model and serial numbers. These numbers can be found inside your refrigerator.

Model Number ___________________________________________ Serial Number ____________________________________________

TABLE OF CONTENTS

SAFETY ...........................................................................................1

Proper Disposal of Your Old

Freezer or Refrigerator .................................................................2

INSTALLING YOUR REFRIGERATOR ..........................................3

Unpacking ....................................................................................3

Location Requirements ................................................................3

Electrical Requirements ...............................................................4

Refrigerator Door ..........................................................................4

Refrigerator Leveling and Door Closing .......................................6

Normal Sounds ............................................................................6

OPERATING YOUR REFRIGERATOR ...........................................7

Ensuring Proper Air Circulation ....................................................7

Using the Control .........................................................................7

Key Eject Lock .............................................................................8

Refrigerator Features ...................................................................8

CARING FOR YOUR REFRIGERATOR ......................................... 9

Cleaning Your Refrigerator ...........................................................9

Changing the Light Bulb ..............................................................9

Power Interruptions ......................................................................9

Vacation and Moving Care .........................................................10

TROUBLESHOOTING ..................................................................10

Refrigerator Operation ...............................................................10

WARRANTY ..................................................................................12

SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

follow instructions.

You

can be killed or seriously injured if you don't

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

W10882914A

instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

■ Plug into a grounded 3 prong outlet.

■ Do not remove ground prong.

■ Do not use an adapter.

■ Do not use an extension cord.

■ Disconnect power before servicing.

■ Replace all parts and panels before operating.

■ Remove doors from your old refrigerator.

■ Connect to a potable water supply only.

■ Use nonflammable cleaner.

■ Keep flammable materials and vapors, such as gasoline,

away from refrigerator.

■ Use two or more people to move and install refrigerator.

To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

■ Disconnect power before installing ice maker (on ice maker

kit ready models only).

■ Use a sturdy glass when dispensing ice (on some models).

■ Do not hit the refrigerator glass doors (on some models).

■ This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

■ Children should be supervised to ensure that they do not

play with the appliance.

SAVE THESE INSTRUCTIONS

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer. WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

Proper Disposal of Your Old Freezer or Refrigerator

WARNING

Suffocation Hazard

Remove doors or lid from your old freezer or refrigerator.

Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned freezers or refrigerators are still dangerous — even if they will sit for “just a few days.” If you are getting rid of your old refrigerator or freezer, please follow these instructions to help prevent accidents.

Before You Throw Away Your Old Freezer or Refrigerator:

■ Take off the doors or lid.

■ Leave the shelves in place so that children may not easily

climb inside.

Important information to know about disposal of refrigerants:

Dispose of refrigerator in accordance with Federal and Local regulations. Refrigerants must be evacuated by a licensed, EPA certified refrigerant technician in accordance with established procedures.

INSTALLING YOUR REFRIGERATOR

Unpacking

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Remove Packaging Materials

■ Remove tape and glue residue from surfaces before turning

on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your ﬁngers. Wipe with warm water and dry.

■ Do not use sharp instruments, rubbing alcohol, ﬂammable

ﬂuids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see the “Safety” section.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the refrigerator straight out when moving it. Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Clean Before Using

After you remove all of the packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in the “Caring For Your Refrigerator” section.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

Ventilation and Clearance

■ Keep ﬂammable materials and vapors, such as gasoline,

away from refrigerator.

■ Do not cover the refrigerator with items such as blankets,

sheets, tablecloths, etc. This reduces air circulation.

■ Allow at least 1" (2.5 cm) between the back of the refrigerator

and the wall. If the refrigerator is to be next to a ﬁxed wall, leave extra space on the hinge side so the door can open wider.

Temperature

Your refrigerator operates most efﬁciently when located in an area where the temperature will not fall below 40°F (5°C). Place your refrigerator in a location where the temperature will not fall below this recommended temperature.

Upon Moving to Final Location

NOTE: This refrigerator may be installed side by side with

another freezer or refrigerator. Allow for a 1" (2.54 cm) space behind the refrigerator and a 1/4" (6.4 mm) clearance between the appliances.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Refrigerator Door

Tools Needed: 5/16" hex-head socket wrench, 3/8" hex-head

socket wrench, ﬂat 2" putty knife

IMPORTANT:

■ Depending on the width of the opening, you may need to

remove the handle or door to move the refrigerator into the house.

■ All graphics referenced in the following instructions are

included later in this section after “Final Steps.” The graphic may be reversed if door swing is reversed.

■ Before you begin, turn the control off and remove food and

adjustable door or utility bins from door.

Remove and Replace the Handle

To Remove the Handle:

1. Loosen the setscrews located on the side of handle at each

end. See “Handle” graphic.

2. Remove the handle from the grommets.

Before you move your refrigerator into its ﬁnal location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115-volt, 60 Hz., AC-only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, press and hold TEMP SETTING for 3 seconds to turn off cooling, and then disconnect the refrigerator from the electrical source.

To Replace the Handle:

1. Place the handle onto the grommets, making sure the

grommets are ﬁtted into the handle holes.

2. Tighten the upper and lower setscrews with the hex key

provided. See “Handle” graphic. Do not over-tighten the setscrews.

Remove Door and Hinges

Hinge screws

1. Unplug refrigerator or disconnect power.

2. Keep the refrigerator door closed until you are ready to lift

it free from the cabinet. NOTE: Provide additional support for the door while

the hinges are being moved. Do not depend on the door magnets to hold the door in place while you are working.

3. Remove the parts for the top hinge as shown in “Top Hinge”

graphic.

4. Lift the refrigerator door free from the lower hinge and cabinet

and set aside.

5. Remove the 4 hex-head hinge screws and bottom hinge

assembly. See “Bottom Hinge” graphic.

Replace Door and Hinges

NOTE: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown and

tighten screws. See “Bottom Hinge” graphic. Replace the refrigerator door.

NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door magnets to hold the door in place while you are working.

2. Assemble the parts of the top hinge as shown in the “Top

Hinge” graphic. Do not tighten the screws completely.

Final Steps

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1. Plug into a grounded 3 prong outlet.

2. Reset the control. See “Using the Control.”

3. Return all removable door parts to door and food

to refrigerator.

Handle

A. Grommet B. Handle C. Setscrews

Door Removal and Replacement

Top Hinge

A. Top Hinge Cover

/16"

Hex-Head Hinge Screws

C. Top Hinge

Bottom Hinge

A. Hinge Pin

/8"

Hex-Head Hinge Screws

Refrigerator Leveling and Door Closing

Your refrigerator has two front adjustable legs — one on each side. The back of the refrigerator rests on two ﬁxed rollers. The base grille covers the adjustable brake feet and roller assemblies located at the bottom of the refrigerator below the refrigerator door. Before making any adjustments, remove the base grille and move the refrigerator to its ﬁnal location.

Tools Needed: 1/4" hex driver, Phillips screwdriver

1. Remove the base grille screws. Grasp the grille ﬁrmly and

pull it toward you. Open the refrigerator door to access the brake feet.

NOTE: To allow the refrigerator to roll more easily, raise the brake feet by turning them counterclockwise. The front rollers will be touching the ﬂoor.

2. Move the refrigerator to its ﬁnal location.

3. Lower the brake feet, by turning them clockwise, until the

rollers are off the ﬂoor and both brake feet are snug against the ﬂoor. This keeps the refrigerator from rolling forward when opening the refrigerator door.

IMPORTANT: If you need to make further adjustments involving the brake feet, you must turn both brake feet the same amount to keep the refrigerator level.

4. Make sure the door closes easily. If you are satisﬁed

with the door opening and closing, skip the next section. If, however, the door does not close easily or the door pops open, adjust the tilt.

To Adjust the Cabinet Tilt:

NOTE: Having someone push against the top of the refrigerator

takes some weight off the brake feet. This makes it easier to turn them.

■ Open the refrigerator door. Use a

brake feet clockwise the same amount. This will raise the front of the refrigerator. It may take several turns to allow the door to close more easily.

/4" hex driver to turn both

5. Make sure the refrigerator is steady. If the refrigerator seems

unsteady or rolls forward when the door is pulled open, adjust the brake feet.

To Steady the Refrigerator:

■ Open the refrigerator door. Using a

/4" hex driver, turn both brake feet clockwise the same amount until the brake feet are snug against the ﬂoor. Check again. If not satisﬁed, continue to adjust the brake feet by half turns of the screw until the refrigerator does not roll forward when the door is opened.

6. Replace the base grille by aligning the ends of the grille with

the leveling assemblies on each side and snapping the grille into place. Reinstall the Phillips screws.

Normal Sounds

Your new refrigerator may make sounds that your old one didn’t make. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, like the ﬂoor, walls, and cabinets, can make the sounds seem louder. The following describes the kinds of sounds and what may be making them.

■ Your refrigerator is designed to run more efﬁciently to keep

your food items at the desired temperatures and to minimize energy usage. The high-efﬁciency compressor and fans may cause your refrigerator to run longer than your old one. You may also hear a pulsating or high-pitched sound from the compressor or fans adjusting to optimize performance.

■ You may hear the evaporator fan motor circulating air through

the refrigerator compartment. The fan speed may increase as you open the doors or add warm food.

■ Rattling noises may come from the ﬂow of refrigerant or items

stored on top of the refrigerator.

■ Water dripping on the defrost heater during a Defrost cycle

may cause a sizzling sound.

■ As each cycle ends, you may hear a gurgling sound due

to the refrigerant ﬂowing in your refrigerator.

■ Contraction and expansion of the inside walls may cause

a popping noise.

■ You may hear air being forced over the condenser by the

condenser fan.

■ You may hear water running into the drain pan during the

Defrost cycle.

A. Brake foot B. Front roller

¹⁄₄"

+ 11 hidden pages