Whirlpool WFW94HEAW2, WFW94HEAW0, WFW94HEAC2, WFW94HEAC0, WFW88HEAW2 Owner’s Manual

...
Whi ®
Use & Care Guide Guide d'utilisation et d_entretien
FRONT-LOADINGAUTOMATICWASHER LAVEUSEAUTOIVlATIQUEA CHARGEMENT
®
®
FRONTAL
W10441071C W10441072C =SP
Para obtener acceso al
cuidado en espa_ol, o para
obtener informaci6n adicional acerca de su producto, visite:
www.whirlpool.com
If you have any problems or questions, visit us at www.whirlpool.com
Designed to use only HE High Efficiency detergents.
Con£ue pour I'utilisation d'un d6tergent haute
efficacit_ seulement.
Certified to Sanitize and to Reduce Allergens Homologu& pour assainir et pour r6duire la pr6sence d'allerg_nes
TABLE OF CONTENTS
WASHER SAFETY...................................................................2
ACCESSORIES........................................................................3
CONTROL PANELAND FEATURES......................................4
USING THE DISPENSER DRAWER.......................................7
CYCLE GUIDE .........................................................................8
USING YOUR WASHER ........................................................10
WASHER MAINTENANCE ....................................................13
TROUBLESHOOTING...........................................................16
WARRANTY...........................................................................23
ASSISTANCE OR SERVICE..................................Back Cover
TABLE DE MATIERES
Sg:CURITE DE LA LAVEUSE ................................................ 24
ACCESSOIRES......................................................................25
TABLEAUDE COMMANDE ET CARACTg:RISTIQUES.......26
UTILISATION DU TIROIR DU DISTRIBUTEUR ...................29
GUIDE DE PROGRAMMES ..................................................30
UTILISATION DE LA LAVEUSE............................................32
ENTRETIEN DE LA LAVEUSE..............................................36
Dg:PANNAGE.........................................................................39
GARANTIE .............................................................................47
ASSISTANCE OU SERVICE......................Couverture artiste
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
2
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer. [] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline, dry=cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. Ifthe hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during this time.
State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.
SAVE THESE iNSTRUCTiONS
Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach intothe washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where it will be exposed to
the weather.
[] Do not tamper with controls. [] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended inthis manual or in
published user-repair instructions that you understand and have the skills to carry out.
[] See "Electrical Requirements" located in the installation
instructionsfor grounding instructions.
ACCESSORIES
Customize your new washer and dryer with the following genuine Whirlpool accessories. For more information on options and ordering, call 1-800-442-9991, or visit us at: www.whirlpool.com/accessories. In Canada, call 1-800-807-6777 or visit us at www.whirlpool.ca.
15" Pedestal Color-matched pedestals raise the
washer and dryer to a more comfortable working height. The large drawer
provides convenient storage.
Work Surface The work surface bridges the
washer and dryer, and provides a convenient working and storage area.
Stack Kit
If space is at a premium, the stack kit
allows the dryer to be installed on top of the washer.
CONTROL PANEL AND FEATURES
Not all features and cycles are available on all models. NOTE: The control panel features a sensitive surface that
responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch
its name.
Model WFW94HE
DRAIN & SPIN
CLEAN WASHER wth _$_
I
I
e I-,
;Steam C_ean _EcoRoost Fan Dry Extra Rnse Cycle Sgnal Control Lock
N N@N N @
od 3 seond HO[_3*,ecOrldS H_d 3so ots,'J far Durn ig,t ForButlor_Sou,ds
Model WFW88HE
COLD WASH
DELICATES
WASH
QUICK
DRAIN
& SP_N
Model WFW87HE
QUICK __ WASH
DRAIN
CLEAN WASHER wth a_ r_
---_- WHITES
HEAVY
DUTY
rOWELS
ALLERGEN
SANmZE
HE,M/Y
DUTY
E!Ste0mC,o0_I_Eco_oostIExt_0R,nsoITum_,eE_oshICyc,eS,_o_,ICont_o,Lock
I ..............................i
@ Q Q@Q Q @
@
CLEAN WASHER with aft_sh
:Steam Clean _EcoBoost Extra Rinse TLmb_eFtesh Cycle SgnaB Control Lock
I = = = _ = ................= = 1
Ho_d seconds Ho_d seco,_d
.... I .... I _ I .... I .... I _"
4
POWER
O
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
WASH CYCLE KNOB
O
Use your Wash Cycle knob to select available cycles on your washer. Turn the knob to select a cycle for your laundry load.
An LED will light up for the cycle selected.
NOTE: The Clean Washer LED will flash when the washer has run 30 wash cycles as a reminder to run the Clean
Washer cycle. See "Cycle Guide" for detailed descriptions of cycles.
NOTE: For best results when using the Wash & Dry cycle, use for loads weighing 2.5 pounds and less, such as a soccer uniform or a running tank and shorts.
START
O
Touch and hold until the light above START comes on to
start a cycle, or touch once while a cycle is in process to pause it. If you want to add a garment, you can touch START
when the "Add Garment" LED is on. DELAY WASH
O
Use + and - to delay the start of the wash cycle by up to 12 hours. To turn off Delay Wash, use + and - to set the delay time to "0," or touch POWER.
LED DISPLAY AND SETTINGS
O
When you select a cycle, its default settings will light up and the Estimated Time Remaining will be displayed. Factors such
as load size, wash temperature, and water pressure may affect
the time shown inthe display during the cycle. Tightly packing
garments, unbalanced loads, or excessive suds may cause the washer to adjust the cycle time, as well.
Touch the desired option along the bottom of the display to
adjust settings. See "Cycle Guide" for available settings on each cycle. Not all settings are available with all cycles.
Cycle Status Lights For details, see "Cycle Status Lights".
Wash Temp The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based on
the type of fabric and soils being washed. For best results,
follow the garment label instructions. All wash temperatures feature a cold rinse.
Spin This washer automatically selects the spin speed based on the cycle selected. Some preset speeds can be changed.
Faster spin speeds mean shorter dry times, but may increase wrinkling in your load.
Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Soil
The Soil setting (wash time) is preset for each wash cycle.
For most loads, use this preset soil level. When you change
the soil setting, the cycle time will increase or decrease in the
Estimated Time Remaining display. For heavily soiled and sturdy fabrics, use the Soil setting to
select more wash time. For lightly soiled and delicate fabrics, use the Soil setting to select less wash time. Lower soil level settings will help reduce tangling and wrinkling.
Presoak
Touch to add a Presoak time of your choice to a wash
cycle. Items will gently tumble through the detergent and water for the selected time to help loosen tough stains.
OPTIONS
O
Touch to activate additional wash options or additional features on the washer. Not all options are available on all models.
_ Steam Clean
The Steam Clean option adds additional soak and wash time to many cycles to help remove tough stains, as well
as a steam boost for added cleaning power. An integrated heater helps to maintain optimal wash temperatures. See
the "Cycle Guide" for cycles that allow the Steam Clean option.
_ EcoBoost TM option
Touch to activate the EcoBoost TM option. The EcoBoost TM option provides additional energy savings through reduced
hot water usage and maintains cleaning performance by lengthening the wash time on some cycles.
Fan Dry Option (on some models} The Fan Dry option will periodically tumble the load after the
end of the cycle for up to 12 hours while the integrated fan circulates air through the washer to reduce humidity.
Toturn on the Fan Dry option, touch Fan Dry. If, however, the Fan Dry option isturned on, it will stay on for all future
cycles until turned back off- the washer remembers the last on/off status set. To turn off the Fan Dry option, touch
Fan Dry. You may also activate the Fan Dry option without running
a cycle by touching and holding POWER for one second, then touching and holding Fan Dryfor 3 seconds, then
touching and holding START for 3 seconds. Toturn off the Fan Dry option when it is running, touch
POWER. NOTE: The door will lock while the Fan Dry option is
active. To cancel the option and unlock the door, touch POWER.
TumbleFresh TM Option (on some models)
Q
The TumbleFreshTMoption will periodically tumble the load after the end of the cycle for up to 6 hours to reduce
humidity. To turn on the TumbleFresh _"option, touch TumbleFresh TM. If, however, the TumbleFresh TM option is
turned on, it will stay on for all future cycles until turned back off - the washer remembers the last on/off status set.
Toturn off the TumbleFresh TM option, touch TumbleFresh. You may also activate the TumbleFresh TM option without
running a cycle by touching and holding POWER for one second, then touching and holding TumbleFresh for 3
seconds, then touching and holding START for 3 seconds. Toturn off the TumbleFresh TM option when it is running,
touch POWER. NOTE: The door will lock while the TumbleFresh TM option is
active. To cancel the option and unlock the door, touch POWER.
_ Extra Rinse
Activate this option to add an extra rinse to most cycles. NOTE: Some cycles include this feature as a default.
See "Cycle Guide" for details. Drum Light (on some models}
Touch and hold EXTRARINSE for 3 seconds to turn on the Drum Light.
_ Cycle Signal
Use this option to turn on or off the signal that sounds at end of cycle.
Toturn off the tones that sound when a setting is touched: Touch and hold CYCLE SIGNAL for about
3 seconds. Repeat to turn them on.
_ Control Lock
Touch and hold for 3 seconds to lock the controls to avoid unwanted changes or operation. Touch and hold 3 seconds
again to unlock. You can still touch START to pause the cycle, or touch POWER to turn the washer off.
CONTROL PANEL AND FEATURES
J
J I
_ HE detergent
_ Liquid fabric
softener
_ Chlorine bleach
O DISPENSER DRAWER
The dispenser drawer gives you the convenience of
automatically adding HE detergent, liquid chlorine bleach, and liquid fabric softener to the wash load at the proper time.
See "Using the Dispenser Drawer" for information on using the dispenser drawer.
_High Efficiency "HE" detergent compartment
This compartment holds liquid or powdered HE detergent
for your main wash cycle.
_ Liquid fabric softener compartment
Automatically dilutes and dispenses liquid fabric softener at
the optimum time inthe cycle.
[] Use only liquid fabric softener in this dispenser.
Liquid chlorine bleach compartment
Q
Automatically dilutes and dispenses liquid chlorine bleach
at the optimum time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach.
Choosing the Right Detergent
Use only High Efficiency detergents. The package will be marked "HE" or "High Efficiency." Low-water washing creates excessive sudsing with a non-HE detergent. Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failure and, over time, buildup of mold or mildew. HE detergents are low-sudsing and quick-dispersing to produce the right amount of suds for the best performance. They hold soil in suspension so it is not re-deposited onto clean clothes. Follow the manufacturer's instructions to determine the amount of detergent to use.
Use only High Efficiency (HE)detergent.
Cycle Status Lights
Model WFW94HE shown
Delay Wash
If a Delay Wash is set, the Delay Wash indicator will light and the delay time will count down in the display.
Door Locked
Door Locked will light to indicate that the door is locked and cannot be opened without first pausing or canceling the cycle.
Sensing
When START is touched, the washer will first perform a self-test on the door lock mechanism and the sensing light will come on. You will hear a click, the drum will make a partial
turn, and the door will unlock briefly before locking again. Once the door has locked the second time, the washer will
begin tumbling and adding water. This sensing process will continue throughout the cycle. You may also hear water
flowing through the dispenser, adding detergent to the load. After the load size is sensed, the estimated time based on
load size will be displayed. The actual cycle time may be lengthened; however, the display will continue to show the
estimated time. The sensing light will blink once a second at various times
during the cycle, such as when the washer is reducing extra suds.
Add Garment
When "Add Garment" is lit, you may pause the washer, open the door, and add items.
Steaming
This will light to show that the cycle is using a steam boost for added cleaning power.
Done
Once the cycle is complete, this light will come on. Remove the load promptly for best results. The Done indicator is also
lit during Fan Dry or TumbleFresh 'M.
Fan Dry/TumbleFresh'"
The Fan Dry/TumbleFresh " indicator will light when the Fan Dry/TumbleFresh ,Moption is active. During this time, the washer will occasionally tumble the load. During Fan Dry only,
a fan also circulates fresh air through the washer.
Eco Monitor
The Eco Monitor allows you to see how the settings you select affect your energy savings. To use the Eco Monitor, choose
the best cycle, temperature, spin speed, soil level, and options for the fabrics being washed. The Eco Monitor will rate the
water and energy use of those selections, from Good to Best. You can then adjust the settings and options to decrease the
amount of energy used within that cycle.
6
USING THE DISPENSER DRAWER
1. Open the dispenser drawer.
2. Add laundry products as described in steps 4-6 in the "Using Your Washer" section.
3. Slowly close the dispenser drawer. Make sure it is completely closed.
NOTE: A small amount of water may remain in the dispensers from the previous wash cycle. This is normal.
fAdding HE detergent to dispenser
O
HEdetergent
Pour a measured amount of HE detergent into detergent compartment.
For powdered detergent, lift the selector
to the high position. For liquid detergent,
push down the selector to the low position.
Do not overfill; adding too much detergent may cause detergent to be dispensed into the washer too early.
compartment
Use only High Efficiency
(HE) detergent.
Powdered detergent: Lift the selector to the high position.
IMPORTANT:
m Do not add single-dose laundry packet to dispenser
drawer.
m Use powdered detergent when using the Delay Wash
option. Liquid detergent may seep out before the wash begins.
Liquid detergent: Push down the selector to
the low position.
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings
that best fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
Not all cycles and options are available on all models.
f temstewash I Wash '
using default cycle . Spin Soil Available
settings: _ycle: Temperature.: Speed: Level: Options: Cycle Details:
Normally soiled cottons Normal Extra Hot Extra Fast Extra Heavy Steam Clean** @ This cycle combines medium-speedlinens, sheets, and Hot Fast Heaw Fan Dry/ tumbling and an extra-fast-speed
mixed garment loads Medium Normal TumbleFresh TM spin. This cycle is designed to
Heavily soiled white
fabrics and garments
Sturdy colorfast fabrics and heavily
soiled garments
Sturdy towels and wash cloths
Sturdy garments and household items
exposed to possible allergens
Clothing, bedding and towels requiring
sanitization
Whites
Heavy
Duty
Towels
Allergen t
Sanitize tt
Warm
Cool Cold
Extra Hot
Hot
Warm
Cool Cold
Extra Hot
Hot
Warm
Cool Cold
Extra Hot
Hot
Warm
Cool Cold
Extra Hot
Hot
Extra Hot/Hot
(each model will
default to the
highest temperature
available)
Off Light Extra Rinse provide the most energy efficiency.
Extra Fast Extra Heavy Steam Clean** _ Uses a longer wash time with
Fast Heaw EcoBoost TM _ fast-speed tumbling, extra rinsing,
Medium Normal Fan Dry/ and an extra-fast-speed spin to
Slow Light TumbleFresh TM provide optimal cleaning and rinsing
Off Extra Rinse when bleach is used.
Extra Fast Extra Heavy Steam Clean** _ Fast-speed tumbling and an
Fast Heavy EcoBoost TM _ extra-fast-speed final spin help
Medium Normal Fan Dry/ provide optimal cleaning and
Slow Light TumbleFresh T" reduce drying times.
Off Extra Rinse
Extra Fast Extra Heavy Steam Clean** _ Provides fast-speed tumbling,
Fast Heaw EcoBoost TM _ longer wash time, normal rinsing,
Medium Normal Fan Dry/ and an extra-fast-speed spin to
Slow Light TumbleFresh T" shorten drying time.
Off Extra Rinse
Extra Fast Extra Heavy Steam Clean** _ Uses more water to flush out
Fast Heaw Fan Dry/ _ allergens such as dust mites and
Medium Normal TumbleFresh T" pet dander from normally-soiled
Extra Fast Extra Heavy Steam Clean** _ Using the highest wash temperature
Fast Heaw Fan Dry/ _ available ensures sanitization.
Medium Normal TumbleFresh T" Check recommended wash
Slow Light Extra Rinse temperature of your items.
Off Delay Wash
Light Extra Rinse items.
PreSoak
Delay Wash
PreSoak
Delay Wash
PreSoak
Delay Wash
PreSoak
Delay Wash
Delay Wash
* All temperature selections feature a cold rinse. ** The Steam Clean option is only available when a Warm, Hot, or Extra Hot water temperature is selected.
Allergen cycle certified by NSF International, an independent, third party testing and certification
_ ? Allergen
organization. The certification verified that this cycle reduced tested allergens by at least 95.0% and maintained the water temperature necessary to kill dust mites. Only the allergen cycle has
been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance
effectiveness.
III This washer has a Sanitize Cycle that is certified by NSF International, an independent, third-party
testing and certification organization. The certification verifies that the Sanitize Cycle eliminates
'b_ Sanitize
o
99.9 _ of bacteria typically found on clothing, bedding, and towels. There is no carryover of bacteria between loads after the cycle iscomplete.
III Use the Sanitize Cycle to clean heavily soiled, colorfast fabrics. This combines an extra-high
water temperature to help ensure the removal of heavy soils and stains. It is recommended that you set your hot water heater to 120°F (49°C) to ensure proper performance during this cycle.
III Only the Sanitize Cycle selected has been designed to meet the requirements of NSF Protocol
P172 Sanitization Performance of Residential and Commercial, family-sized clothes washer.
8
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
Not all cycles and options are available on all models.
,tomstowas. c' W
using default Y : as _pin sO" cycle settings: I Temperature*: Speed: Level:
No clothes in washer
Wet load of clothes
Swimwear, items that need rinsing
2-4 lightly soiled synthetic garments,
athletic uniforms, or workout wear
Small loads of 3-4 lightly soiled garments
Sheer fabrics, lingerie, sweaters, and lightly-soiled shirts,
blouses, trousers,
aants, and skirts
Bright or darkly colored cottons, linens, casual and mixed loads
Clean Washer
with affresh ®
Drain
& Spin
Drain
& Spin
with
Extra Rinse
Wash
& Dry
Quick Wash
Delicates
Cold
Wash
N/A
Extra Hot
Hot
Warm
Cool
Cold
Extra Hot
Hot
_/a r m
Cool Cold
Extra Hot
Hot
_/a r m
Cool Cold
Extra Hot
Hot
Warm
Cool
Cold
Cold
Extra Fast N/A Fan Dry/
Fast TumbleFresh TM
Medium Delay Wash
Slow
Off
Extra Fast Extra Heavy Fan Dry/
Fast Heavy TumbleFresh TM
Medium Normal Delay Wash
Slow Light
Off
Extra Fast Extra Heavy Steam Clean**
Extra Fast Extra Heavy Steam Clean**
Fast Heavy Fan Dry/
Medium Normal TumbleFresh TM
Slow Light Extra Rinse
Off PreSoak
Extra Fast Extra Heavy Steam Clean**
Fast Heavy Fan Dry/
Medium Normal TumbleFresh TM
Slow Light Extra Rinse
Off PreSoak
Extra Fast Extra Heavy Fan Dry/
Fast Heavy TumbleFresh TM
Medium Normal Extra Rinse
Off Light Delay Wash
Heavy Fan Dry
Normal Extra Rinse
Available CYcle Details:
Options: I
Light PreSoak
Delay Wash
Delay Wash
Delay Wash
Use this cycle every 30 washes to keep the inside of your washer
fresh and clean. This cycle uses a higher water level. Use with affresh ®
washer cleaner tablet or liquid chlorine bleach to thoroughly clean
the inside of your washer. This cycle should not be interrupted.
See "Washer Care." IMPORTANT: Do not place
garments or other items in the washer during the Clean Washer
with affresh _>cycle. Use this cycle with an empty wash tub. See
"Washer Care" in "Washer Maintenance."
water from the load. Spin speed
Use Drain & Spin to remove excess can be set to a slower setting.
Select Drain & Spin; then select
@
Extra Rinse to add water. The cycle includes an extra-fast-speed spin.
For some fabrics, you may wish to set the spin speed to a slower
setting. This short wash cycle has an
©
extra-fast-speed spin followed by intermittent tumbling and fan
activation to circulate air through the clothes.
For small loads (3-4 items) needed
©
quickly. This cycle combines fast-speed tumbling, a shortened
wash time, and an extra-fast-speed spin for reduced drying times.
This cycle combines slow-speedtumbling and slow-speed spin for gentle fabric care and reduced
wrinkling.
i_ This cycle uses a concentrateddetergent solution along with cold
water throughout the cycle to gently lift out stains and care for fabrics.
* All temperature selections feature a cold rinse. ** The Steam Clean option is only available when a Warm, Hot, or Extra Hot water temperature is selected.
Load Size Recommendations For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the washer drum with 3-4 items, not more than 1/4 full.
_ Medium load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
9
USING YOUR WASHER
Fire Hazard
Never place items in the washer that are dampened with gasoline or other flammable fluids.
No washer can completely remove oil. Do not dry anything that has ever had any type of oil on
it (including cooking oils). Doing so can result in death, explosion, or fire.
First wash cycle without laundry
Before washing clothes for the first time, if not completed during the final installation step, choose the QUICK WASH cycle and run it without clothes. Use only HE detergent. Use 1/2 the
manufacturer's recommended amount for a medium-size load. This initial cycle serves to ensure the interior is clean before
washing clothes.
1, Sort and prepare your laundry
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
Add single-dose laundry packet, Oxi, color-safe bleach, or fabric softener
crystals (if desired)
Single-dose laundry packet, Oxi-type boosters, color-safe bleach, or fabric softener crystals can be added to the drum prior to adding laundry.
NOTE: Do not add clothes to washer drum prior to adding laundry products. Always follow manufacturer's instructions.
Sort items by recommended cycle, water temperature, and colorfastness. Separate heavily soiled items from lightly soiled. Separate delicate items from sturdy fabrics. Treat stains promptly and check for colorfastness by testing stain remover products on an inside seam.
IMPORTANT:
[] Empty pockets. Loose change, buttons, or any small object
can plug pumps and may require a service call.
[] Close zippers, fasten hooks, tie strings and sashes, and
remove non-washable trim and ornaments.
[] Mend rips and tears to avoid further damage to items
during washing.
[] Turn knits inside out to prevent pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
[] Do not dry garments if stains remain after washing, because
heat can set stains into fabric.
[] Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
10
3. Load laundry into washer
Place a load of sorted clothes loosely in the washer. Items need to move freely for best cleaning and to reduce wrinkling and tangling. Close the washer door by pushing it firmly until the
latch clicks. [] Depending on load type and cycle, the washer can be fully
loaded, but not tightly packed. Washer door should close easily. See "Cycle Guide" for loading suggestions.
[] Mix large and small items and avoid washing single items.
Load evenly.
[] Wash small items in mesh garment bags. For multiple items,
use more than one bag and fill bags equally.
USING LAUNDRY PRODUCT DISPENSERS
NOTE: Do not add single-dose laundry packets, Oxi-type boosters, color-safe bleach, or fabric softener crystals to dispensers. They will not dispense correctly.
f
4. Add HE detergent
\ \
HEdetergent
7. Touch POWER to turn on washer (optional)
_ii_iiiiiiiiiii/_
Slowly close the dispenser drawer. Make sure the drawer is closed completely, then touch POWER to turn on the washer or go to Step 8.
Adjust the selector, based on type of HE detergent used (either liquid or powdered). See "Using the Dispenser
Drawer" instructions on how to use the dispenser.
Add liquid fabric softener to dis
(if desired)
Pour a measured amount of liquid fabric softener into liquid fabric softener compartment. Always follow manufacturer's
directions for correct amount of fabric softener based on your load size.
Fabric softener is always dispensed in the last rinse, even if Extra Rinse is selected.
IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup (60 mL) of fabric softener. Do not fill past the MAX line.
Overfilling dispenser will cause fabric softener to immediately dispense into washer.
[] Do not spill or drip any fabric softener onto the clothes. [] Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
8, Select CYCLE*
NORMAL
COLD WASH -- WHITES
DELICATES -- HEAVY
QUICK WASH
DRAIN & SPIN
Appearance may vary.
CLEAN WASHER with 8_rl_
DUTY
ALLERGEN
-- SANITIZE
Turn cycle knob to select your wash cycle. See "Cycle Guide" for details on cycle features.
9. Adjust settings, if desired*
:Steam Clean _EcoBoost Fan Dry _xtra R_r_e Cycle S_gr_al Cor_troJ Lock
Add liquid chlorine bleach to dis
(if desired)
Add liquid chlorine bleach to the bleach compartment. Do not overfill, dilute, or use more than 2/3 cup (165 mL). Do not use color-safe bleach or Oxi in the same cycle with
liquid chlorine bleach. m Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess.
m Do not fill beyond the "MAX" level. Overfilling could cause
garment damage.
Appearance may vary.
The display will show the default settings for the selected cycle. To adjust a setting, touch its name - Wash Temp, Spin,
Soil, or Presoak. Adjusting settings will change the Estimated Time Remaining. Tightly packing the load, unbalanced loads,
or excessive suds may also cause the washer to increase the cycle time.
*Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
11
USING YOUR WASHER
1 0. Select any additional options*
Steam Clean _EcoBoost Fan Dry Extra Rinse Cycle S_gnal Control Lock
Appearance may vary.
To add an option to the cycle, touch its name - Steam Clean,
EcoBoost TM option, Fan Dry/TumbleFresh TM, Extra Rinse, Cycle Signal, or Control Lock. To remove an option from the selected cycle, touch the option again.
1 1. Setting a delayed wash
If you do not want to begin a cycle immediately, you may choose the DELAY WASH option. This will delay the start of the wash cycle by up to 12 hours.
To set a delayed wash:
1. Touch DELAY WASH + and - buttons to set the desired delay time.
2. Touch and hold START to set the delay. The delay countdown has started when the START light stops blinking.
1 2. Touch and hold START to begin
wash cycle
Hold 3 set or_d Hold 3 seconds Hold 3 s_or_r_s
for D, #_, Ught for Button _ounds
_iiiiiiii:_iii;iii_
iii,
f13, Remove garments promptly
ii
-i
ii
for small items between the tub and the washer drum. If you will be unable to remove the load
promptly, use the Fan Dry or TumbleFresh _= option (depending on model). If selected, the Fan Dry option will activate the fan and tumble the load periodically for up to 12 hours. The TumbleFresh '= option will tumble the load periodically for up to 6 hours. To turn off the Fan Dry or TumbleFresh '=option, touch POWER. To set the washer so that the Fan Dry/TumbleFresh '= option does not come on for future cycles, touch Fan Dry or
TumbleFresh. NOTE:
[] The door will remain locked while the Fan DryFFumbleFresh '=
[] A small amount of water may remain in the dispensers after
[] This washer has a tight seal to avoid water leaks. To avoid
after cycle is finished
option is active. To cancel the option and unlock the door, touch POWER.
the wash cycle is complete. This is normal.
odors, leave the door open to allow the washer to dry between uses.
immllllf- _
Fan Dry
OR
::i
TumbleFresh
Hold to Start
Touch and hold START to start the wash cycle. To pause a cycle in progress, touch START once, then touch and hold again to continue the cycle. To cancel a cycle, touch POWER.
Once you touch and hold START, you will hear the door lock, un- lock, and lock again. The washer door will remain locked during the wash cycle.
Unlocking the door to add garments: If you need to open the door to add 1 or 2
missed garments, you may do so while the "Add Garment" light is lit.
Touch START once; the door will unlock once the washer movement has stopped. This may take several minutes. Then close door and touch and hold START again to restart the cycle.
_SD Add Garment i
Hold to Sta_'t
12
*Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
WASHER MAINTENANCE
WATER iNLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.
WASHER CARE
Recommendations to Help Keep Your Washer Clean and Performing at its Best
1. Always use High Efficiency (HE) detergents and follow the HE detergent manufacturer's instructions regarding the amount of HE detergent to use. Never use more than the recommended amount because that may increase the rate at which detergent and soil residue accumulate inside your washer, which in turn may result in undesirable odor.
2. Use warm or hot water washes sometimes (not exclusively cold water washes), because they do a better job of controlling the rate at which soils and detergent accumulate.
3. Always leave the washer door slightly ajar between uses to help dry out the washer and prevent the buildup of odor-causing residue.
Cleaning Your Front Loading Washer Read these instructions completely before beginning the
routine cleaning processes recommended below. This Washer Maintenance Procedure should be performed,
at a minimum, once per month or every 30 wash cycles, whichever occurs sooner, to control the rate at which soils
and detergent may otherwise accumulate in your washer. Cleaning the Door Seal
1. Open the washer door and remove any clothing or items from the washer.
2. Inspect the colored seal between the door opening and the drum for stained areas or soil buildup. Pull back the
seal to inspect all areas under the seal and to check for foreign objects.
3. If stained areas or soil buildup are found, wipe down these areas of the seal using either of the following
two procedures: a. affresh ®Grit Grabber TM Cloth Procedure:
i. When the cycle is complete, gently pull back the
rubber door seal and clean the entire surface with the rough side of the Grit Grabber TM cloth.
b. Dilute Liquid Chlorine Bleach Procedure:
i. Mix a dilute bleach solution, using 3/4 cup (177 mL)
of liquid chlorine bleach and 1 gallon (3.8 L) of warm tap water.
ii. Wipe the seal area with the dilute solution, using
a damp cloth.
iii. Let stand 5 minutes. iv. Wipe down area thoroughly with a dry cloth and let
washer interior air dry with door open.
IMPORTANT:
[] Wear rubber gloves when cleaning with bleach. [] Refer to the bleach manufacturer's instructions
for proper use.
F WASHER CARE (cont.) "_
Cleaning the Inside of the Washer This washer has a special cycle that uses higher water
volumes in combination with affresh ®Washer Cleaner or liquid chlorine bleach to thoroughly clean the inside of the
washer. Steam washer models also utilize steam to enhance cleaning in this special cycle. NOTE: Read these instructions completely before beginning
the cleaning process. Begin procedure
1. affresh ®Washer Cleaner Cycle Procedure {Recommended for Best Performance):
ao Open the washer door and remove any clothing
or items.
bo Add an affresh ®Washer Cleaner tablet to the washer
drum.
co Do not add the affresh ®Washer Cleaner tablet
to the dispenser drawer.
d. Do not add any detergent or other chemical to the
washer when following this procedure.
eo Close the washer door. fo Select the CLEAN WASHER cycle.
g. Touch and hold START to begin the cycle. The Clean
Washer Cycle Operation is described below.
2. Chlorine Bleach Procedure: ao Open the washer door and remove any clothing
or items.
b. Open the dispenser drawer and add liquid chlorine
bleach to the MAX level in both the bleach compartment and the fabric softener compartment.
NOTE: Use of more liquid chlorine bleach than is recommended above could cause washer damage
over time. co Close the washer door and the dispenser drawer.
d. Do not add any detergent or other chemicals to the
washer when following this procedure.
eo Close the washer door. fo Select the CLEAN WASHER cycle.
g. Touch and hold START to begin the cycle. The Clean
Washer Cycle Operation is described below.
NOTE: For best results, do not interrupt cycle.
Description of Clean Washer Cycle Operation:
1. The Clean Washer cycle will determine whether clothing or other items are in the washer.
2. If no items are detected in the washer, it will proceed with the cycle.
a. If any items are detected in the washer, "rL" (remove
load) will be displayed. The door will unlock. Open washer and remove any garments from the washer
drum.
b. Touch POWER to clear the "rL" code. co Touch and hold START to restart the cycle.
After the cycle is complete, leave the door open slightly to allow for better ventilation and drying of the washer interior.
13
WASHER MAINTENANCE
WASHER CARE (cont.)
Cancellation of Clean Washer Cycle Operation: if the Clean Washer cycle is canceled by the user after it has
been initiated, it may take up to 30 minutes for the washer to purge any affresh®Cleaner, chlorine bleach, or other chemistry from the wash system and to adequately rinse any remaining chemistry. The washer door will remain locked until the cancellation process has been completed. This ensures no cleaning chemistry will be carried over to the next wash cycle and reduces the potential for damage to subsequent loads of laundry or to the washer itself.
Clean Washer Cycle Cancellation Procedure:
1. Touch POWER on the washer once.
2. The washer will begin to drain and rinse away the remaining cleaning chemistry.
3. The cycle will complete the cancellation process in approximately 30 minutes or less.
4. The washer then can be used to either repeat the Clean Washer cycle or to wash laundry using one of the regular wash cycles selected by the user.
Cleaning the Dispensers After a period of using your washer, you may find some
residue buildup in the washer's dispensers. To remove residue from the dispensers, remove the drawer and wipe the surfaces with a damp cloth and towel dry either before or after you run the Clean Washer cycle. Use an all-purpose
surface cleaner, if needed. IMPORTANT: Dispenser is not dishwasher safe.
Cleaning the Outside of the Washer Use a soft, damp cloth or sponge to wipe up any spills.
Occasionally wipe the outside of your washer to help keep it looking new. Use mild soap and water.
IMPORTANT: To avoid damaging the washer's finish, do not use abrasive products.
CLEAN WASHER CYCLE REMINDER
The Clean Washer LED will _ -- _ flash at the end of a wash
cycle when the washer has run 30 wash cycles. This is a reminder to run the Clean Washer cycle.
If the Clean Washer cycle is not turned on, the LED will stop flashing at the end of a wash cycle after running 3 more regular wash cycles. After 30 more wash cycles are completed, the Clean Washer LED will again flash at the end of a wash cycle as a reminder.
f REMOVING THE DISPENSER
To remove:
1. Pull dispenser drawer out until it stops.
2. Press down on the release tab and pull straight out to remove the dispenser.
\
3. Lift off cover panel by pulling straight up.
To replace:
1. Slide cover panel back onto posts on dispenser.
2. Align edges of dispenser with guides in washer, then slide dispenser
back into slot.
14
NON=USE AND VACATION CARE
f REINSTALLING/USING WASHER AGAIN
Operate your washer only when you are home. If moving, or not using your washer for a period of time, follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer to avoid flooding due to water pressure surges.
3. Clean the dispensers. See "Cleaning the Dispensers."
WINTER STORAGE CARE
iMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets, disconnect and drain water inlet hoses.
2. Put 1 qt. (1 L) of R.V.-type antifreeze in washer drum and run washer on NORMAL cycle for about two minutes to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3. Disconnect drain hose from drain system and from back
of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer drum.
6. Bundle power cord with a rubber band or cable tie to
keep it from hanging onto the ground.
IMPORTANT: Call for service to install new transport bolts. Do not reuse transport bolts. Washer must be transported
in the upright position. To avoid structural damage to your washer, it must be properly set up for relocation by a
certified technician.
To reinstall washer after non-use, vacation, winter storage, or moving:
1. Refer to Installation Instructions to locate, level, and connect washer.
2. Before using again, run washer through the following recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in washer or reconnect power.
3. Run washer through HEAVY DUTY cycle to clean washer and remove antifreeze, if used. Use only HE detergent. Use half the manufacturer's recommended amount for a
medium-size load.
15
Loading...
+ 33 hidden pages