Whirlpool WBV36992 NFC IX INSTRUCTION FOR USE

A. Refrigerator Compartment
1. Lighting
2. Filter in the fan 2a. button of fan 2b. cover of fan
3. Shelves / Shelf area
4. Bottle rack
5. Multi-flow cold air system
"Zero Degrees" box (to keep foods fresher for longer)
7. Rating plate with commercial name
8. Fruits and vegetables crisper
9. Crisper divider
10. Reversibility kit
11. Separator
12. Door trays
B. Freezer Compartment
13. Storage baskets for frozen food items
14. Shelves
15. Middle basket (freezing zone)
16. Ice tray and/or cold accumulator
17. Door seals
C. Control panel Anti-bacterial protection (depending on the model):
- Antibacterial filter in the fan (2)
- Antibacterial additives in the Crisper (8)
- Door seals are made of material able to inhibit bacterial
growth (17)
Notes:
- Depending on the model the number and type of
accessories may vary.
- In case of power failure the cold accumulator helps to
keep optimal storage temperature longer.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depend on
the ambient temperature, frequency of opening the doors, as well as location of the appliance. Temperature setting must consider these factors.
- The appliance accessories are not suitable for washing
dishwasher.
- After inserting food, ensure that the freezer
compartment door closes properly.
TO INCREASE STORAGE
The freezer compartment can be used without the baskets to increase storage and for large products. You can place the food products directly on the racks.
HYDROSENSE SHELVES (depending on the model)
The special contour of the HydroSense shelves creates a barrier that contain spills and simplifies cleanup, preventing liquids from leaking onto shelves below.
HOW TO START THE APPLIANCE FIRST TIME
After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance. When the appliance is connected to the power supply, the display lights up and all the icons appear on the display for few seconds. The default (factory) values of the freezer compartment and refrigerator compartment settings light-up.
FAN WITH A BUTTON
The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. By default, the fan is ACTIVE. It is advisable to keep the fan active, so that the "6th
Sense Fresh Control" / "Green Intelligence ProFresh"
function can work properly and also when the ambient air temperature is above 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions.
Note: Do not obstruct the air intake area with food items.
To guarantee the right performance at lower ambient temperature (colder than 18°C) and to minimize Energy Consumption, turn off the fan. To turn off the fan press the button (2a).
If the appliance has the fan it can be equipped with the antibacterial filter. Remove it from the box (found in the crisper drawer (item 8) and insert into the cover of fan (item 2b). The replacement procedure is attached with the filter.
PRODUCT SHEET
GB
D GB F NL E P I GR S N DK FIN PL CZ SK H
RUS
BG RO
UKR
CA AE
CONTROL PANEL
1. Fridge temperature LEDs
2. On/Stand-by icon/button
3. "6th Sense Fresh Control" / "Green Intelligence
ProFresh" icon
4. Eco Night icon/button
5. Freezer temperature LEDs
6. Fridge temperature / Fast Cool (press 3 sec.) button
7. Black Out icon
8. Reset button / Alarm icon
9. Key Lock button
10. Freezer temperature / Fast Freeze (press 3 sec.) button
“ZERO DEGREES” BOX (depending on the model)
The "Zero Degrees" box is specifically designed to maintain a low temperature and a suitable humidity level, in order to keep foods fresher for longer (e.g. meat, fish, fruit and winter vegetables).
Activating and deactivating the box
The temperature inside the box, when active, is approximately 0°. The following factors are vital for the "Zero Degrees" box to work properly:
- the refrigerator compartment must be switched on
- the temperature of the refrigerator compartment must be
between +2°C and +5°C
- the box must be inserted to enable activation
- no special functions must have been selected (Standby,
Cooling-Off, Vacation – where applicable). If one of these special functions has been selected, the "Zero Degrees" box must be deactivated manually, and any fresh food inside it removed. If manual deactivation does not take place, the box will be deactivated automatically after 8 hours.
Note:
- if the symbol does not light up when the box is activated, check that the box is properly inserted; if the problem persists, contact your nearest authorized After-sales Service
- if the box is active and the drawer open, the symbol on the control panel may be deactivated automatically. If the drawer is inserted, the symbol will become active again
- irrespective of the state of the box, a slight noise may be heard: this is normal and is not a cause for concern.
- when the box is not active, the temperature inside it depends on the general temperature inside the refrigerator compartment.
In this case, we recommend it is used to store fruit and vegetables which are not sensitive to cold temperatures (fruits of the forest, apples, apricots, carrots, spinach, lettuce, etc.). Important: when the function is activated and there are foodstuffs with a high water content, condensation may form on shelves. In this case, disable the function temporarily.
Removing the "Zero Degrees" box:
The "Zero Degrees" box can be removed to create more space inside the refrigerator. In this case proceed as follows:
- switch off the box
- pull out the drawer and the white plastic shelf underneath the box.
Note: the upper shelf and the side supports cannot be removed. To restore "Zero Degrees" box operation, make sure you replace the white plastic shelf underneath the box before inserting the drawer and reactivating the function. To optimise energy consumption, we recommend you deactivate the "Zero Degrees" box and remove it. Clean the box and all its parts regularly, using a cloth and a solution of warm water and neutral detergent specifically formulated for refrigerator interiors (take care not to immerse the white plastic shelf underneath the box in water).
Before cleaning the box (including the outside), remove the drawer so as to disconnect the box from the electricity supply.
Never use abrasive detergents.
FUNCTIONS
On/Stand-by
This function turns On/Stand-by both the refrigerator and freezer compartments. To put the product in Stand­by, press & hold the On/Stand-by button for 3 seconds. All the icons turn off except On/Stand-by icon back light to indicate that the appliance is in Stand­by. When the appliance is in Stand-by, the light inside the refrigerator compartment does not work. Remember that this operation does not disconnect the appliance from the power supply. To switch the appliance on again, simply press the On/Stand-By button.
Fridge Temperature
To adjust the Fridge Temperature, press the Fridge °C button. The Fridge Temperature can be adjusted
To activate/deactivate the box, press the button as illustrated in the figure.
When the box has been activated, the symbol lights up.
AECA
UKR
ROBG
RUS
HSKCZPLFINDKNSGRIPENLFGBD
PRODUCT SHEET
GB
Loading...
+ 2 hidden pages