W10405144B
TOP-LOADING
LAVEUSE HAUTE
HIGH EFFICIENCY
LOW-WATER WASHER
USE AND CARE GUIDE
Table of Contents
WASHER SAFETY .........................................................2
WHAT’S NEW UNDER THE LID? .................................3
CONTROL PANEL AND FEATURES ............................4
Dispensers ....................................................................... 5
CYCLE GUIDE ............................................................... 6
USING YOUR WASHER ................................................8
WASHER MAINTENANCE .............................................. 11
TROUBLESHOOTING ...................................................... 13
WARRANTY........................................................................ 18
ASSISTANCE OR SERVICE ........................... Back Cover
Para una version en espanol, visite www.whirlpool.com
EFFICACITÉ À FAIBLE
CONSOMMATION D’EAU
AVEC CHARGEMENT
PAR LE DESSUS
GUIDE D’UTILISATION
ET D’ENTRETIEN
Table des matières
SÉCURITÉ DE LA LAVEUSE ......................................19
QUOI DE NEUF SOUS LE COUVERCLE? ................20
TABLEAU DE COMMANDE
ET CARACTÉRISTIQUES ..........................................21
Distributeurs .................................................................. 22
GUIDE DES PROGRAMMES ...................................... 23
UTILISATION DE LA LAVEUSE ..................................26
ENTRETIEN DE LA LAVEUSE ........................................ 30
DÉPANNAGE ...................................................................... 32
GARANTIE .......................................................................... 39
ASSISTANCE OU SERVICE .............. Couverture arrière
W10405144B
W10405145B - SP
Designed to use only HE High Efciency
detergents.
Conçue pour l’utilisation d’un détergent haute
efcacité seulement.
Certied to Sanitize
Homologué pour assainir
WASHER SAFETY
2
WHAT’S NEW UNDER THE LID?
Cleaning with Less Water
Washplate
Washplate
Traditional agitator-style
washer
The most striking difference in your new washer is the low-water
washplate wash system. The washer automatically adjusts the
water level to the load size—no water level selector is needed.
Low-water washer
Automatic Load Size Sensing
Once you start the cycle, the lid will lock, and the washer will
begin the sensing process to determine the correct water level
for the load.
You will hear the motor turn the basket in short pulses to
thoroughly wet the load. This low-water wash method uses
less water and energy compared to a traditional agitator-style
washer.
Choosing the Right Detergent
Use only High Efciency detergents. The package will be
marked “HE” or “High Efciency.” Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using
regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
Load garments in loose heaps evenly around the washplate.
Do not load garments directly over the center of the washplate;
when loaded, the center of the washplate should be visible.
As the washer dampens and moves the load, the level of the
garments will settle in the basket. This is normal, and does not
indicate that more garments should be added.
IMPORTANT: You will not see a washer basket full of water
as with your past agitator-style washer. It is normal for some of
the load to be above the water line.
Use only High Efciency (HE) detergent.
Concentrated Cleaning
Low-water cleaning means concentrated cleaning. Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils.
Normal Sounds You Can Expect
At different stages of the wash cycle, you may hear sounds and
noises that are different from those of your previous washer.
For example, you may hear a clicking and hum at the beginning
of the cycle, as the lid lock goes through a self-test. There
will be different kinds of humming and whirring sounds as the
washplate moves the load. And sometimes, you may hear
nothing at all, as the washer determines the correct water level
for your load or allows time for clothes to soak.
3
CONTROL PANEL AND FEATURES
1
2
3
4 5
Not all features and cycles are available on all models.
POWER BUTTON
1
Press to turn the washer ON. Pressing once while the
washer is on will cancel the current cycle, pressing twice
will turn the washer OFF.
WASH CYCLE KNOB
2
Turn the Wash Cycle knob to select a cycle for your laundry
load. See “Cycle Guide” for detailed descriptions of cycles.
TIME/STATUS DISPLAY
3
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load
size and water pressure may affect the time shown in the
display. Overloading, unbalanced loads, or excessive suds
may cause the washer to adjust the cycle time, as well.
If you have set a delay start to the cycle, the Estimated
Time Remaining display will show the delay time adjusted.
When the cycle is complete, the Done indicator will light
until the lid is opened.
The Lid Lock indicator lights up when the lid is locked
and cannot be opened. If you need to open the lid,
press START/PAUSE. The lid will unlock once the washer
movement has stopped. This may take several minutes
if the load was spinning at high speed. Press START/
PAUSE again to restart the cycle.
4
ECO MONITOR
Your washer is specially designed to conserve energy
and water. Each cycle, along with any selected options,
will result in different energy and water usage. To use
the Eco Monitor, choose the best cycle for the load being
washed, then adjust temperature and spin speed options
to improve the energy usage within that cycle.
7
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
DEEP CLEAN with HEATER
The Deep Clean with Heater option helps to ensure better
soil and stain removal. Deep Clean uses a heater within
the washer to maintain the selected temperature setting
throughout the wash period. This option will add some
additional time to the cycle based on which temperature
is selected. It is a preset cycle setting on the Sanitary
cycle. Deep Clean with Heater may be selected as an
option with other cycles.
DISPENSERS
Press this button to set the dispensers for Oxi, Fabric
Softener, or both so that the selected laundry product
is added to the load at the correct time.
CYCLE SIGNAL
Use this option to adjust volume of the signal that sounds
at end of cycle. A louder signal is helpful in removing
items as soon as cycle is complete.
Press and hold the CYCLE SIGNAL button to illuminate
the washer basket, making loading and unloading easier.
The light comes on when the lid is opened, and turns
off automatically when the lid is closed or when you
press and hold the button again. If the lid is left open,
the drum light will turn off on its own after a few minutes.
If you turn on the drum light while the lid is closed, it
will not automatically time out. You must press and hold
the CYCLE SIGNAL button again to turn it off.
6
START/PAUSE BUTTON
5
Press to start the selected cycle; press again to pause
a cycle.
6
CYCLE OPTIONS
You may add or remove options for each cycle. Not all
options can be used with all cycles, and some are preset
to work with certain cycles.
ECOBOOST
The EcoBoost option allows you to increase your
energy savings on your wash cycles. When this option
is used, the wash cycle will use cooler wash water than
the selected cycle and may increase the spin speed
for faster drying.
4
Drum Light
7
CYCLE MODIFIERS
When you select a cycle, its default settings will light up.
SOIL LEVEL
Soil Level (wash time) is preset for each wash cycle.
As you press the Soil Level pad, the cycle time (minutes)
will increase or decrease in the Estimated Time Remaining
display and a different wash time will appear.
For most loads, use the Soil Level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, press SOIL LEVEL to select more wash time,
if needed. For lightly soiled and delicate fabrics, press
SOIL LEVEL to select less wash time, if needed. A lower
Soil Level setting will help reduce tangling and wrinkling.
SPIN SPEED
This washer automatically selects the spin speed
based on the cycle selected. The preset speeds can be
changed. Not all spin speeds are available with all cycles.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds mean less wrinkling, but will leave
your load more damp.
Dispensers
High Efciency “HE” detergent dispenser
A
Add liquid or powdered HE detergent product to this
dispenser for your main wash cycle.
WASH TEMP
Temperature Control senses and maintains uniform
water temperatures by regulating incoming hot and
cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
• Warm and hot water may be cooler than what your
previous washer provided.
• Even for cold wash settings, some warm water
may be added to the washer to maintain a minimum
temperature. For cold water with no warm water
added, select Eco Cold.
C
Use only High Efciency (HE) detergent.
Liquid chlorine bleach/Timed Oxi dispenser
B
Liquid chlorine bleach: This dispenser holds up to
3/4 cup (180 mL) liquid chlorine bleach. The bleach will
be automatically diluted and dispensed at the optimum
time during the wash cycle. This dispenser cannot dilute
powdered bleach.
Oxi: This dispenser holds up to 3/4 cup (180 mL) Oxi
booster or other laundry booster, such as powdered
or liquid color-safe bleach. Laundry boosters are
automatically dispensed at the proper time during the
wash cycle. Be sure to select Timed Oxi from the options
to ensure proper dispensing.
NOTE: Fill dispenser with only bleach OR oxi. Do not mix
products.
Liquid fabric softener dispenser
C
Pour measured liquid fabric softener into the liquid fabric
softener dispenser, if desired. It will dispense automatically
at the optimum time when the Fabric Softener option is
selected.
• Use only liquid fabric softener in this dispenser.
B
A
5
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle.
For best fabric care, choose the cycle that best ts the load being washed.
If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage.
Not all cycles and options are available on all models.
Items to wash: Cycle:
Lightly soiled
garments
Machine-wash
silks, hand-wash
fabrics and wool
Athletic and
high-performance
wear
Normally soiled
sheets
Towels and
terrycloth items
Quick
Wash
Handwash/
Delicate
Active
Wear
Sheets
Towels
Wash
Temp*:
Hot
Warm
Cool
Cold
Eco Cold
Warm
Cool
Cold
Eco Cold
Hot
Warm
Cool
Cold
Eco Cold
Hot
Warm
Cool
Cold
Eco Cold
Hot
Warm
Cool
Cold
Eco Cold
Spin
Speed:
High
Medium
Low
No Spin
Medium
Low
No Spin
High
Medium
Low
No Spin
High
Medium
Low
No Spin
High
Medium
Low
No Spin
Soil
Level:
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Available
Options:
Deep Clean
Extra Rinse
Fabric Softener
Oxi
Deep Clean
Extra Rinse
Fabric Softener
Oxi
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Cycle Details:
Use this cycle to wash small loads of 2–3
lightly soiled garments that are needed in
a hurry. This cycle combines a fast agitation,
a shortened wash time, and a high-speed
spin to shorten drying times.
Use this cycle for machine washable delicate
garments. This cycle uses intermittent wash
action with cool water and slow spin to
gently care for ne washables and avoid
shrinkage. Place small items in mesh bags
before washing.
Use this cycle to wash loads of no-iron
fabrics such as sport shirts and other active
wear.
Use this cycle to wash bed sheets. This
cycle uses extra water and a special wash
action to reduce tangling.
This cycle defaults to a warm wash and
medium spin speed. Hotter temperatures
help remove soils and odors; faster spin
speeds will reduce drying times.
No-iron fabrics
Cottons, linens, and
mixed garment loads
Bright or darkly
colored cottons,
linens, casual and
mixed loads
Large items such as
sleeping bags, small
comforters, jackets
Sturdy fabrics,
colorfast items
* Wash temperatures vary according to the chosen cycle setting. All cycle settings use a cold rinse temperature.
Perm Press/
Casual
Eco Cold
Normal Hot
Eco Cold
Cold Wash/
Clean Care
Bulky
Items
Heavy
Duty
Eco Cold
Eco Cold
Eco Cold
Hot
Warm
Cool
Cold
Warm
Cool
Cold
Cold
Hot
Warm
Cool
Cold
Hot
Warm
Cool
Cold
High
Medium
Low
No Spin
High
Medium
No Spin
High
Medium
Low
No Spin
Medium
Low
No Spin
High
Medium
Low
No Spin
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Use this cycle for lightly soiled ofce wear.
The cycle uses a warm wash, a cooldown,
and medium spin speeds for better wrinkle
performance.
Use this cycle to clean normally soiled
cottons, linens, and mixed fabric loads.
Default settings can be adjusted as needed.
This cycle uses cold water wash and a
concentrated detergent solution to gently
lift out stains and care for fabrics. Settings
may be adjusted as desired, but must use
only cold water settings.
This cycle is designed for oversized items
that do not easily absorb water, such as
comforters, pillows, and poly-lled jackets.
The cycle uses an initial soak to thoroughly
saturate the item(s).
Use this cycle for heavily soiled or sturdy cotton
items. This cycle combines high-speed wash
action, longer wash time, and extra high-speed
spin to shorten drying times. Adjust temperature
settings as needed.
6
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle.
For best fabric care, choose the cycle that best ts the load being washed.
If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage.
Not all cycles and options are available on all models.
Items to wash:
Heavily soiled
white fabrics
Cottons and linens
exposed to possible
allergens
Heavily soiled,
colorfast fabrics
No clothes in
washer
Heavily soiled fabrics
Swimsuits, items
that need rinsing
only.
Wet load of clothes
Cycle:
Whites Hot
Allergen Hot High
Sanitary with
†
Oxi
Clean
Washer
with
®
affresh
Deep
Water Soak
Rinse/Drain
& Spin
Rinse/Drain
& Spin
Wash
Temp*:
Warm
Cool
Cold
Eco Cold
Hot
Warm
Cool
Cold
Eco Cold
Speed:
Medium
No Spin
Medium
No Spin
Medium
No Spin
No Spin
Medium
No Spin
Medium
Spin
High
Low
Low
High
Low
High
Low
High
Low
Soil
Level:
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Heavy
Normal
Medium
Light
Available
Options:
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Deep Clean
Extra Rinse
Fabric Softener
Oxi
Deep Clean
Extra Rinse
Fabric Softener
Oxi
EcoBoost
EcoBoost
EcoBoost
Fabric Softener
Cycle Details:
This cycle adds liquid chlorine bleach to
the load at the proper time for improved
whitening of soiled white fabrics.
This cycle uses more water to ush
out allergens, such as dust mites or pet
dander, from normally soiled garments.
This cycle removes more than 95% of
allergens.
Use this cycle to eliminate 99.9% of
bacteria when used in conjunction with the
Deep Clean with Heater option. Preset cycle
setting must be used to achieve the proper
sanitization. Be sure to add an Oxi product
to the Liquid Chlorine Bleach dispenser.
Use this cycle every 30 washes to keep
the inside of your washer fresh and clean.
This cycle uses a higher water level. Use
with affresh® Washer Cleaner tablet or
liquid chlorine bleach to thoroughly clean
the inside of your washer. This cycle should
not be interrupted. See “Washer Care.”
IMPORTANT: Do not place garments or
other items in the washer during the Clean
Washer with affresh® cycle. Use this cycle
with an empty wash tub.
Adjustable soak time to loosen heavy soils.
At the end of the cycle, the washer will
drain but not spin, and a tone will sound.
To set a follow-up cycle, add additional
detergent and select a cycle based on
fabric type.
This cycle uses a high-speed spin. For
some fabrics, you may wish to set the
spin speed to a lower setting.
To select, choose Rinse/Drain & Spin and
turn off Extra Rinse. Use this cycle to spin
excess water out of a load. This cycle
drains the water and spins at a high speed.
Spin speed is adjustable.
* Wash temperatures vary according to the chosen cycle setting. All cycle settings use a cold rinse temperature.
Model: WTW8800Y**
† Sanitary with Oxi
Sanitary with Oxi cycle certied by NSF International, an independent, third party testing and certication organization. The
certication veried that the cycle reduced 99.9% of bacteria typically found in clothing, bedding, and towels. There is no carry
over of bacteria between loads after the cycle is complete. Only the Sanitary with Oxi cycle has been designed to meet the
requirements of NSF Protocol P12 for Sanitizing Effectiveness.
7
USING YOUR WASHER
1. Sort and prepare your laundry
• Empty pockets. Loose change, buttons, or any small
object can pass under the washplate and become
trapped, causing unexpected sounds.
• Sort garments by recommended cycle, water temperature,
and colorfastness.
• Separate heavily soiled garments from lightly soiled.
• Separate delicate garments from sturdy fabrics.
• Do not dry garments if stains remain after washing; heat
can set stains into fabric.
• Treat stains promptly.
• Close zippers, fasten hooks, tie strings and sashes.
Remove non-washable trim and ornaments.
• Mend rips and tears to avoid further damage to garments
during washing.
2. Add single-dose laundry packet or
fabric softener crystals (if desired)
Single-dose laundry packet or fabric softener crystals can be
added to the basket prior to adding laundry.
NOTE: Do not add clothes to washer basket prior to adding
laundry products. Always follow manufacturer’s instructions.
3. Load laundry into washer
Helpful Tips:
• When washing water-proof or water-resistant items, load
evenly. See “Cycle Guide” for tips and more information
on using the Bulky Items cycle.
• Use mesh bags to help avoid tangling when washing
delicate or small items.
• Turn knits inside out to avoid pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
8
Load garments in loose heaps evenly
around the washplate. Do not load
garments directly over the center
of the washplate; when loaded, the
center of the washplate should be
visible. Try mixing different sized
garments to reduce tangling.
IMPORTANT: Garments need to move freely for best cleaning
and to reduce wrinkling and tangling.
NOTE: Do not add single-dose laundry packets or fabric softener
crystals to dispensers. They will not dispense correctly.
6. Add liquid fabric softener to
dispenser
4. Add HE detergent to dispenser
Detergent dispenser
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT: Use only High Efciency detergents. The package
will be marked “HE” or “High Efciency.” Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
HELPFUL TIP: See “Washer Maintenance” for information on
recommended method of cleaning washer dispensers.
Fabric softener dispenser
Pour a measured amount of liquid
fabric softener into dispenser; always
follow manufacturer’s directions for correct amount of
fabric softener based on your load size. Then select
Fabric Softener option using the Dispensers button.
IMPORTANT: Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle.
Do not overll or dilute. Overlling dispenser will cause
fabric softener to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed in the last rinse.
NOTE: Do not use liquid fabric softener dispenser balls
in this washer. They will not dispense correctly.
5. Add liquid chlorine bleach or Oxi
product to dispenser
Liquid chlorine bleach/
Oxi dispenser
Add liquid chlorine bleach or Oxi
laundry boost product to the dispenser.
When using Oxi products or other
laundry boosters (liquid or powdered
color-safe bleach), select the Oxi option, press the Dispensers
button until Oxi is selected. It is not necessary to select the Oxi
option when using liquid chlorine bleach.
• Do not overll, dilute, or use more than 3/4 cup (180 mL)
of liquid chlorine bleach. Overlling will cause the bleach
or Oxi product to dispense immediately into the washer.
• Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
7. Press POWER to turn on washer
9
8. Select cycle
Turn cycle knob to choose
your wash cycle. Estimated
Time Remaining will light up
with a cycle time. You may
notice time adjusting during the cycle. This is normal.
If you do not want to begin a cycle immediately, you may
choose DELAY WASH option.
To choose a delay time:
1. Press DELAY WASH button to select desired delay time.
2. Press START/PAUSE.
To cancel delaying a cycle:
1. Press START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
9. Select cycle modiers
Once you select a cycle, the default modiers for that cycle will
be lit. Press the cycle settings buttons to change the Soil Level,
Spin Speed, and Wash Temp, if desired. Not all settings are
available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added,
so this may be cooler than what
your previous washer provided.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Eco Cold
This is the cold water temperature
from your faucet without warm
water added.
Dark colors
that bleed or fade
Light soils
Dark colors
that bleed or fade
Light soils
10
10. Select cycle options
WASHER MAINTENANCE
WATER INLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of
replacement on the label with a permanent marker.
NOTE: This washer does not include inlet hoses.
See the Installation Instructions for more information.
WASHER CARE
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Deep Clean with Heater or Extra Rinse.
These may be turned off, if desired.
NOTE: Not all options are available with all cycles.
11. Press START/PAUSE to begin
wash cycle
Press the START/PAUSE button to start the wash cycle. When
the cycle has nished, the DONE indicator will light and the
end of cycle signal will sound (if set). Promptly remove garments
when cycle is done to avoid odor, reduce wrinkling, and rusting
of metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE; the lid will unlock once the washer
movement has stopped. This may take several minutes
if the load was spinning at high speed. Then close lid
and press START/PAUSE again to restart the cycle.
If lid is left open for more than 10 minutes the water will
pump out.
Recommendations to Help Keep Your Washer Clean
and Performing at its Best
1. Always use High Efciency (HE) detergents and follow the
HE detergent manufacturer’s instructions regarding the
amount of HE detergent to use. Never use more than the
recommended amount because that may increase the
rate at which detergent and soil residue accumulate inside
your washer, which in turn may result in undesirable odor.
2. Use warm and hot wash water settings sometimes (not
exclusively cold water washes), because they do a better
job of controlling the rate at which soils and detergent
accumulate.
3. Always leave the washer lid open between uses to
help dry out the washer and prevent the buildup of
odor-causing residue.
Cleaning Your Top Loading Washer
Read these instructions completely before beginning the
routine cleaning processes recommended below. This
Washer Maintenance Procedure should be performed,
at a minimum, once per month or every 30 wash cycles,
whichever occurs sooner, to control the rate at which soils
and detergent may otherwise accumulate in your washer.
Cleaning the Inside of the Washer
To keep your washer odor-free, follow the usage instructions
provided above, and use this recommended monthly
cleaning procedure:
Clean Washer Cycle
This washer has a special cycle that uses higher water
volumes in combination with affresh® Washer Cleaner
or liquid chlorine bleach to clean the inside of the washer.
Begin procedure
1. affresh® Washer Cleaner Cycle Procedure
(Recommended for Best Performance):
a. Open the washer lid and remove any clothing or items.
b. Place an affresh® Washer Cleaner tablet in the bottom
of the washer basket.
c. Do not place an affresh® Washer Cleaner tablet
in the detergent dispenser.
d. Do not add any detergent or other chemical to the
washer when following this procedure.
e. Close the washer lid.
f. Select the CLEAN WASHER cycle.
g. Press the START/PAUSE button to begin the cycle. The
Clean Washer Cycle Operation is described below.
NOTE: For best results, do not interrupt cycle. If cycle
must be interrupted, press POWER/CANCEL. (For models
with no Power/Cancel button, press and hold START/
PAUSE for three seconds). After the Clean Washer cycle
has stopped, run a
cleaner from washer.
Rinse/Drain & Spin
cycle to rinse
11
WASHER CARE (cont.)
2. Chlorine Bleach Procedure (Alternative):
a. Open the washer lid and remove any clothing
or items.
b. Add 1 cup (236 mL) of liquid chlorine bleach
to the bleach compartment.
NOTE: Use of more liquid chlorine bleach than is
recommended above could cause washer damage
over time.
c. Close the washer lid.
d. Do not add any detergent or other chemical
to the washer when following this procedure.
e. Select the CLEAN WASHER cycle.
f. Press the START/PAUSE button to begin the cycle.
The Clean Washer Cycle Operation is described below.
NOTE: For best results, do not interrupt cycle. If cycle
must be interrupted, press POWER/CANCEL. (For models
with no Power/Cancel button, press and hold START/
PAUSE for three seconds). After the Clean Washer cycle
has stopped, run a
cleaner from washer.
Description of Clean Washer Cycle Operation:
1. This cycle will ll to a water level higher than in normal
wash cycles to provide rinsing at a level above the water
line for normal wash cycle.
2. During this cycle, there will be some agitation and
spinning to increase the removal of soils.
After this cycle is complete, leave the lid open to allow
for better ventilation and drying of the washer interior.
Cleaning the Dispensers
After a period of using your washer, you may nd some
residue buildup in the washer’s dispensers. To remove
residue from the dispensers, wipe them with a damp cloth
and towel dry. Do not attempt to remove the dispensers or
trim for cleaning. The dispensers and trim are not removable.
If your model has a dispenser drawer, however, remove the
drawer and clean it before or after you run the Clean Washer
cycle. Use an all-purpose surface cleaner, if needed.
Cleaning the Outside of the Washer
Use a soft, damp cloth or sponge to wipe away any spills.
Use only mild soaps or cleaners when cleaning external
washer surfaces.
IMPORTANT: To avoid damaging the washer’s nish, do not
use abrasive products.
Rinse/Drain & Spin
cycle to rinse
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets; disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and
run washer on RINSE/DRAIN & SPIN cycle for about
30 seconds to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3. Disconnect drain from drain system.
4. Unplug power cord.
5. Place inlet hoses inside washer basket.
6. Drape power cord and drain hose over the console
and secure with masking tape.
7. Place foam packing ring from original shipping materials
back inside washer. If you do not have packing ring,
place heavy blankets or towels into basket opening.
Close lid and place tape over lid and down front of
washer. Keep lid taped until washer is placed in
new location.
NON-USE AND VACATION CARE
Operate your washer only when you are home.
If moving, or not using your washer for a period of time,
follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer, to avoid ooding
due to water pressure surge.
12
REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage
or moving:
1. Refer to Installation Instructions to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run washer through BULKY ITEMS cycle to clean
washer and remove antifreeze, if used. Use only HE
High Efciency detergent. Use half the manufacturer’s
recommended amount for a medium-size load.
Loading...