Whirlpool W10254043C User Manual
®
FRONT-LOADING
AUTOMATIC WASHER
Use & Care Guide
For questions about features, operation/performance,
parts, accessories, or service call: 1-800-253-1301
In Canada, call: 1-800-807-6777
www.whirlpool.com or www.whirlpool.ca
or visit our website at
LAVEUSE
Certified to Sanitize
Certifié pour aseptiser
AUTOMATIQUE À
CHARGEMENT FRONTAL
Guide d'utilisation et d'entretien
Au Canada, pour assistance, installation ou service, composez le :
ou visitez notre site Internet à
Table of Contents/Table des matières .................. 2
Para obtener acceso al manual de uso y cuidado en español, o para
obtener información adicional acerca de su producto, visite:
Designed to use only HE High Efficiency Detergent
Conçue pour l'utilisation d'un détergent haute efficacité
seulement
1-800-807-6777
www.whirlpool.ca
www.whirlpool.com.
W10254043C
TABLE OF CONTENTS
WASHER SAFETY .......................................................................................2
INSTALLATION REQUIREMENTS .............................................................3
Tools and Parts.........................................................................................3
Options......................................................................................................4
Location Requirements.............................................................................4
Drain System.............................................................................................6
Electrical Requirements............................................................................6
INSTALLATION INSTRUCTIONS ...............................................................7
Remove Transport System.......................................................................7
Connect the Inlet Hoses ...........................................................................7
Connect the Drain Hose ...........................................................................8
Secure the Drain Hose..............................................................................8
Level the Washer ......................................................................................8
Complete Installation ................................................................................ 9
FEATURES AND BENEFITS .......................................................................9
WASHER USE ............................................................................................10
Starting Your Washer..............................................................................10
Using the Proper Detergent....................................................................10
Using the Dispenser................................................................................11
Pausing or Restarting .............................................................................12
Changing Cycles, Options, and Modifiers..............................................12
Status Lights ...........................................................................................13
Cycles .....................................................................................................13
Normal Washer Sounds..........................................................................15
Options....................................................................................................15
Modifiers .................................................................................................16
Laundry Guide ........................................................................................16
LAUNDRY TIPS..........................................................................................17
Loading ...................................................................................................17
WASHER CARE .........................................................................................18
Cleaning Your Washer............................................................................18
Water Inlet Hoses....................................................................................18
Vacation, Storage, and Moving Care ..................................................... 19
TROUBLESHOOTING ...............................................................................19
ASSISTANCE OR SERVICE......................................................................22
In the U.S.A.............................................................................................22
In Canada................................................................................................22
Accessories.............................................................................................22
WARRANTY ...............................................................................................23
TABLE DES MATIÈRES
SÉCURITÉ DE LA LAVEUSE .................................................................... 24
EXIGENCES D'INSTALLATION................................................................25
Outillage et pièces .................................................................................. 25
Options ................................................................................................... 25
Exigences d'emplacement .....................................................................26
Système de vidange............................................................................... 27
Spécifications électriques...................
INSTRUCTIONS D'INSTALLATION ......................................................... 29
Élimination des accessoires de transport .............................................. 29
Raccordement des tuyaux d'alimentation
Connect the Drain Hose ......................................................................... 30
Immobilisation du tuyau de vidange ...................................................... 30
Réglage de l'aplomb de la laveuse ........................................................ 31
Achever l'installation............................................................................... 31
CARACTÉRISTIQUES ET AVANTAGES..................................................31
UTILISATION DE LA LAVEUSE................................................................32
Mise en marche de la laveuse.........
Utilisation du détergent approprié..........................................................33
Utilisation du distributeur........................................................................ 34
Pause ou remise en marche...................................................................35
Changement des programmes, options et
Témoins lumineux................................................................................... 36
Programmes ...........................................................................................36
Sons normaux émis par la laveuse ....
Options ................................................................................................... 38
Modificateurs.......................................................................................... 39
Guide de lessivage ................................................................................. 40
CONSEILS DE LESSIVAGE ...................................................................... 41
Chargement ............................................................................................ 41
ENTRETIEN DE LA LAVEUSE.................................................................. 41
Nettoyage de la laveuse
Tuyaux d'arrivée d'eau ...........................................................................42
Précautions à prendre avant les vacances,
un entreposage ou un déménagement.................................................. 43
DÉPANNAGE .............................................................................................43
ASSISTANCE OU SERVICE...................................................................... 46
Aux États-Unis........................................................................................ 46
Au Canada .............................................................................................. 46
Accessoires............................................................................................. 47
GARANTIE..................................................................................................47
.........................................................................41
.................................................... 28
............................................. 29
....................................................... 33
modificateurs..................... 35
.................................................... 38
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
2
follow instructions.
can be killed or seriously injured if you don't
You
instructions.
follow
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■ Pliers (that open to 1
■ Flashlight (optional)
Tools needed for connecting the drain hose
■ Locking pliers (that open to 1
Tools needed for installation
■ Open end wrenches 17 mm and 13 mm
■ Level
■ Wood block
■ Ruler or measuring tape
NOTE: Re
of hose failure. Record hose installation or replacement dates for
future reference.
place inlet hoses after 5 years of use to reduce the risk
9
/16" [39.5 mm])
9
/16" [39.5 mm])
Parts supplied:
A B
C
F
G
DE
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
E. Beaded strap
F. Drain hose
G.Hose clamp
3
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free number
on the cover or in the “Assistance or Service” section.
If You Have You Will Need to
Laundry tub or
standpipe taller
an 96" (2.4 m)
th
Sump pump system (if not already
available)
Overhead sewer Standard 20 gal. (76 L), 30" (762 mm) tall
tub or utility sink and sump pump
drain
(available from local plumbing suppliers)
Buy
Pedestal
Color Part Number
Height
15.5" (394 mm) New Aspen (Light Green) XHP1550VA
15.5" (394 mm) Tuscan Chestnut XHP1550VC
15.5" (394 mm) Ocean Blue XHP1550VE
15.5" (394 mm) Cranberry Red XHP1550WR
15.5" (394 mm) Lunar Silver XHP1550WL
Stack Kit
Floor drain Siphon break, Part Number 285834;
itional drain hose Part Number
add
8318155; and connector kit, Part
Number 285835
Drain hose too
rt
sho
Water faucets
beyon
d reach of fill
hoses
4 ft (1.2 m) drain hose extension kit,
Part Number 285863
2 longer water fill hoses: 6 ft (1.8 m)
Part Number 76314, 10 ft (3.0 m)
Part Number 350008
Options
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (254 mm) or a
.5" (394 mm) pedestal. These pedestals
15
height of the washer for a total height of approximately
48" (1219 mm) or 53.5" (1359 mm).
will add to the total
Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
efer to the “Assistance or Service” section. Ask for Part
r
Number 8541503.
Location Requirements
Selecting the proper location for your washer improves
performance and minimizes noise and possible washer “walk.”
Your washer can be installed under a custom counter, or in a
basement, laundr
System.”
Companion appliance location req
considered. Proper installation is your responsibility.
You will need
■ A water heater set to deliver 120°F (49°C) water to the washer.
■ A grounded electrical outlet located within 6 ft (1.8 m) of
where the power cord is attached to the back of the washer.
See “Electrical Requirements.”
■ Hot and cold water faucets located within 4 ft (1.2 m) of the
hot and cold water fill valves, and water pressure of
20-100 psi (137.9-689.6 kPa).
■ A level floor with a maximum slope of 1" (25 mm) under entire
washer. Installing the washer on soft floor surfaces, such as
carpets or surfaces with foam backing, is not recommended.
■ A sturdy and solid floor to support the washer with a total
weight (water and load) of 400 lbs (180 kg).
Do not operate your washer in t
Some water can remain in the washer and can cause damage in
low temperatures.
y room, closet, or recessed area. See “Drain
uirements should also be
emperatures below 32°F (0°C).
AB
A. 10" (254 mm) pedestal
B. 15.5" (394 mm) pedestal
To order, call the dealer from whom you purchased your washer or
refer to the “Assistance or Service” section.
Pedestal
Color Part Number
Height
10" (254 mm) White WHP1000SQ
10" (254 mm) Black WHP1000SB
10" (254 mm) Diamond Dust (Silver) WHP1000SU
15.5" (394 mm) White XHP1550VW
15.5" (394 mm) Black XHP1550VB
15.5" (394 mm) Diamond Dust (Silver) XHP1550VU
4
Installation clearances
■ The location must be large enough to allow the washer door to
be fully opened.
■ Additional spacing should be considered for ease of
installation and servicing.
■ Additional clearances might be required for wall, door, and
floor moldings.
■ Additional spacing of 1" (25 mm) on all sides of the washer is
recommended to reduce noise transfer.
■ Companion appliance spacing should also be considered.
Washer Dimensions
(1295 mm)
Recessed or clo
27
5
1"
"
(686 mm)
32
(813 mm)
38
(965 mm)
"
"
(25 mm)
set installation - Washer on pedestal
(457 mm)
1
"
27
"
(686 mm)
A. Recessed area
B. Side view - closet or confined area
1
"
(25 mm)
32
(813 mm)
18
" min.
"
4
(102 mm)
"
Recommended installation spacing for custom undercounter installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
39
" min.
(990 mm)
27
1
"
(25 mm)
"
(686 mm)
1
"
(25 mm)
Recommended installation spacing for recessed or closet installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
34
" min.
(864 mm)
1
"
(25 mm)
32
"
(813 mm)
4
"
(102 mm)
3
"
(76 mm)
3
"
(76 mm)
Recommended installation spacing for recessed or closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
2
*
48 in.
2
(310 cm
)
2
*
24 in.
2
(155 cm
)
3"*
(76 mm)
3"*
(76 mm)
1"*
(25 mm)
*Required spacing
6"* (152 mm)
76"
(1930 mm)
A. Side view - closet or confined area
B. Closet door with vents
*Min. top and bottom air openings for closet door.
1
5
/2"
(140 mm)
1"*
(25 mm)
27"
(686 mm)
1"*
(25 mm)
*Required spacing
r venting out the side, 1" (25 mm) spacing is allowed.
**Fo
Recommended installation spacing for cabinet installation
■ The dimensions shown are for the recommended spacing.
5
■ For cabinet installation, with a door, the minimum ventilation
openings in the top are required.
7
" (178 mm)
4
"
(102 mm)
7
" (178 mm)
32
"
(813 mm)
1
"
(25 mm)
27
"
(686 mm)
9
"
(229 mm)
1
"
(25 mm)
Drain System
The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system. Select the drain hose installation method you need. See
“Tools and Parts.”
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of
2" (50 mm). The minimum carry-away capa
than 17 gal. (64 L) per minute.
The top of the standpipe must be at least 30
no higher than 96" (2.4 m) from the bottom of the washer.
30" min.
(762 mm)
city can be no less
" (762 mm) high and
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
re, or electrical shock.
■ A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical
supply is required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a separate circuit
serving only this appliance be provided.
■ This washer is equipped with a power supply cord having a
3 prong ground plug.
■ To minimize possible shock hazard, the cord must be plugged
into a mating, 3 prong, ground-type outlet, grounded in
ac
cordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly grounded
outlet installed by a qualified electrician.
■ If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that the
ground path is adequate.
■ Do not ground to a gas pipe.
■ Check with a qualified electrician if you are not sure the
washer is properly grounded.
A
B
Laundry tub drain system (view C)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top
of the laundry tub must be at least 30" (762 mm) above the floor.
Floor drain system (view D)
The floor drain system requires a siphon break that may be
purchased separately. See “Tools and Parts.”
The siphon break must be a minimum of 28" (710 mm) from the
bottom of the
washer. Additional hoses might be needed.
28" min.
30" min.
(762 mm)
(710 mm)
CD
6
■ Do not have a fuse in the neutral or ground circuit.
2. Once the bolt is loose, move it to the center of the hole and
completely pull out the bolt, including the plastic spacer
covering the bolt.
3. Once all 4 bolts are removed discard bolt and spacers. Then
pull the power cord through the opening of the rear panel and
close the hole with the attached cap.
ose the bolt holes with the 4 transport bolt hole plugs.
4. Cl
NOTE: If the washer is to be transported at a later date, call your
local service center. To avoid suspension and structural damage
to your washer, it must be properly set up for relocation by a
certified technician.
Connect the Inlet Hoses
1. Insert new flat washers (supplied) into each end of the inlet
hoses. Firmly seat the washers in the couplings.
INSTALLATION INSTRUCTIONS
2. Make sure the washer drum is empty.
Remove Transport System
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
IMPORTANT: Position the washer so that the rear of the washer is
within approximately 3 ft (900 mm) of its final location.
There are 4 bolts in the rear panel of the washer that support the
sus
pension system during transportation. These bolts also retain
the power cord inside the washer until the bolts are removed.
3. Attach the hose with the red color indicator to the Hot (left)
inlet valve. Attaching the red coupling first makes it easier to
tighten connection with pliers. Screw on coupling by hand
until it is seated on the washer.
tach the hose with the blue color indicator to the Cold (right)
4. At
water inlet valve. Screw on coupling by hand until it is seated
on the washer.
H. Hot water inlet
C. Cold water inlet
A B
A. Coupling
B. Washer
H
C
1. Using a 13 mm wrench, loosen each of the bolts.
5. Using pliers, check the tightness of the hose couplings
already attached to the washer.
NOTE: Do
6. Attach hot water hose to the hot water faucet. Screw on
coupling by hand until it is seated on the washer.
7. Attach
coupling by hand until it is seated on the washer.
not overtighten. Damage to the coupling can result.
cold water hose to the cold water faucet. Screw on
7
8. Using pliers, tighten the couplings with an additional
two-thirds turn.
Do not overtighten. Damage to the coupling can result.
NOTE:
9. Turn on the water faucets and check for leaks. NOTE: Replace inlet hoses after 5 years of use to reduce the
risk of hose failure. Record hose installation or replacement
dates on the hoses for future reference.
Periodically inspect and replace hoses if bulges, kinks, cuts,
wear, or leaks are found.
Laundry tub drain or standpi
Connect the drain hose form to the corrugated drain hose.
A B
A. Snap either end of the drain hose form to the drain hose at
the point where the corrugation begins.
B. Bend drain hose over drain hose form and snap into place.
pe drain
Connect the Drain Hose
Remove drain hose from washer drum
1. Use locking pliers, squeeze hose clamp tabs together and insert
over the end of drain hose.
2. Slide drain hose onto washer connection.
3. Once drain hose is in place, release pliers.
To keep drain water from going back into the washer:
■ Do not straighten the drain hose, and do not force excess
drain hose into standpipe. Hose should be secure, but loose
enough to provide a gap for air.
■ Do not lay excess hose on the bottom of the laundry tub.
Floor drain
You may need additional parts. See Floor drain under “Tools and
Parts.”
Secure the Drain Hose
1. Drape the power cord over the washer top.
2. Secure the drain hose to the laundry tub leg or standpipe with
the beaded strap provided. (See illustrations A and B.)
A BC
If the washer faucets and the drain standpipe are recessed
(see illustration C), put the hooked end of t
standpipe. Tightly wrap the beaded strap around the water
inlet hoses and the drain hose.
Do not force excess drain h
ose into the standpipe.
he drain hose in the
4. W
asher drain system can be installed using a floor drain, wall
standpipe, floor standpipe, or laundry tub.
8
Level the Washer
Properly leveling your washer avoids excessive noise and
vibration.
1. Chec
k the levelness of the washer by placing a level on the
top edge of the washer, first side to side, then front to back.
If the washer is against a wall, move the washer out slightly
before tipping back. If the washer is not level, first prop the
front with a wood block and adjust the feet as necessary; then
prop the back and adjust feet as necessary. Repeat this step
until washer is level.
2. Make sure all four feet are stable and resting on the floor. Then check that the washer is perfectly level (use a level).
3. After the
turn the nuts on the feet tightly against the washer cabinet.
IMPORTANT: All four feet must be tigh
not tight against the washer cabinet, the washer may vibrate.
4. The washer should not mov
diagonally when pushed on its top edges.
5. Sl
6. Confirm the levelness of the washer.
washer is level, use a 17 mm open-end wrench to
tened. If the nuts are
e front to back, side to side, or
ide the washer to its final location.
Complete Installation
1. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. See “Electrical Requirements.”
2. Che
3. Check that you have all o
4. Dispose of/recycle all packaging materials.
5. Che
6. Check for leaks around faucets and inlet hoses.
ck that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
f your tools.
ck that the water faucets are on.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
re, or electrical shock.
7. Plug into a grounded 3 prong outlet.
8. R
ead “Washer Use.”
9. To test and clean your machine, make sure there are no
clothes in the washer and add one AFFRESH
washer drum. Select Power, the Clean Washer cycle and then
select START. This cycle will take approximately 50 minutes to
complete. Allow the washer to complete the entire cycle
without interruption.
®
tablet to the
FEATURES AND BENEFITS
Electronic Controls
Flexible electronic controls are easy to use whether you are a
beginner or an expert.
Smart Dispensers
The Smart Dispensers make your washer truly automatic. This
washer provides a three-compartment dispenser which includes
separate compartments for main wash detergent, fabric softener,
and bleach. The dispenser has large pour zones. The dispenser is
self-cleaning, and can be easily removed. Laundry products are
diluted with fresh water and added to the load at the proper time
in the wash cycle.
Clean Washer with AFFRESH™ Cycle
This cycle uses steam to raise the temperature of the unit and
makes the washer self-cleaning, flushing the machine’s interior
free of dirt and other residue. The use of AFFRESH
cleaner or liquid chlorine bleach with this cycle will remove and
help avoid odor-causing residue.
Auto Water Level
This washer automatically adjusts water level for optimal cleaning
and rinsing performance. Two sensors determine load size, load
composition, and suds level, then the sensors adjust the water
level to the proper setting. This eliminates guesswork. The water
level is just right for every wash load size.
Larger Load Size
Since there is no agitator, you can wash larger, bulkier items such
as a king-sized bedspread. You are also able to wash more
clothes at one time, which means fewer loads.
Stainless Steel Drum
The stainless steel drum eliminates corrosion and enables higher
spin speeds for more water extraction, helping to reduce drying
time compared to traditional top-load washers.
®
washer
High-Efficiency Wash System
Your new front-loading, high-efficiency washer saves time with
fewer, larger loads. It also lowers your water and energy bills by
helping conserve resources.
Spin Speeds
This washer automatically selects the spin speed based on the
cycle selected. This factory setting can be changed, however. This
washer offers up to five different spin speed choices, up to 1300
rpm.
Heating Element
This washer has a heating element that automatically heats the
water to the optimal temperature on select cycles. This enables
stepped cleaning, a process in which warm water is brought in
and mixed with detergent first, then the water is heated. Stepped
cleaning starts the wash cycle with warm water to remove stains
(such as blood and grass).
6th Sense® Technology
Intuitive intelligence “knows every load” determining load sizes,
water levels and how much cleaning time is needed.
Add A Garment
When this option is available at the beginning of the cycle, the
Add A Garment Status Light will glow for the first 8 minutes. This
washer allows an 8-minute period in which other garments may
be added to a load.
9
Direct Injection Wash System
This washer channels 100% of the water through the dispensers
to assure thorough rinse-out and mixture of all the laundry
products before they touch any garments. The water is then
sprayed from the top front onto the center of the load, providing
even distribution and optimum cleaning performance. It is normal
for small amounts of water to remain in the dispensers when the
wash cycle is complete.
WASHER USE
Efficient Detergent System with Anti-Escape Valve
This washer has a specially designed valve that closes during the
wash portion of the cycle so that 100% of the water and detergent
mixture is used on the load. The Efficient Detergent System
ensures that no water or detergent is wasted.
6-Point Suspension System
Shock absorbers, 2 springs and electronic controls are specially
designed to help redistribute the load automatically and minimize
movement of the wash drum during the spin cycle. The 6-Point
Suspension System reduces the amount of force transmitted to
the floor by the washer, resulting in reduced noise, and vibration.
NOTE: The panel shown above may be different from that of your model.
Starting Your Washer
Use only High Efficiency detergents. The package for this type of
detergent will be marked “HE” or “High Efficiency.” This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result
in washer errors, longer cycle times, and reduced rinsing
performance. It may also result in component failures and
noticeable mold or mildew. HE detergents are made to produce
the right amount of suds for the best performance. Follow the
manufacturer's instructions to determine the amount of detergent
to use. Remember, concentrated detergents such as 2x or higher
will use less detergent based on load size.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following is a guide to using your washer. Please refer to
ific sections of this manual for more detailed information.
spec
Do not store laundry products on the top surface of this washer.
ibration is normal during operation.
V
Before washing clothes for the first time, if not completed during
the final installation step, choose the Normal/Casual cycle and run
it without clothes. Use only HE High Efficiency detergent. Use 1/2
the manufacturer’s recommended amount for a medium-size
load. This initial cycle serves to ensure the interior is clean before
washing clothes.
Using the Proper Detergent
Use only HE High Efficiency detergent.
First Wash Cycle Without Laundry
For All Wash Cycles
10
1. Open the washer door by pulling on the handle. Sort laundry
according to color and type of fabric. Place a load of sorted
clothes in the washer. Do not overload washer. Overloading
can cause poor cleaning.
■ The washer can be fully loaded, but not tightly packed.
Washer door should close easily.
■ Mix large and small items and avoid washing single items.
Load evenly.
■ Wash small items, such as infant socks, in mesh garment
bags. It is recommended that more than one garment bag
be used, and that each garment bag be filled with equal
amounts of material.
■ When unloading garments, check under the gray colored
seal at the front of the tub for small items.
2. Close the w
asher door by pushing it firmly until the lock clicks.
The washer door will remain locked during the wash cycle.
NOTES:
■ After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin.
■ The door can be opened only if PAUSE/CANCEL is
selected while the Add A Garment light is glowing or if the
cycle has been canceled.
■ See “To cancel a cycle” in “Changing, Cycles, Options,
and Modifiers” section.
3. Open the dispenser drawer and add laundry
products to the
detergent, bleach, or fabric softener compartments. Close
drawer slowly to avoid spills. See “Using the Dispenser.”
4. Turn on the washer by selecting POWER. Select one of the
cycles by turning the cycle selector. The indicator light for the
selected cycle will glow green. When selecting a wash cycle,
the preset options and modifiers (such as Water Temp, Spin
Speed, Soil Level, and Rinse) for the selected cycle will glow
green. Selectable options will glow amber. If an option or
modifier is unavailable with a selected cycle, the light will not
illuminate. The display shows the estimated time remaining.
The preset settings provide the recommended fabric care for
the selected cycle. See “Cycles.”
5. Select the de
sired Options. Not all options are available with
all cycles. See “Options.”
6. Select the
desired modifiers such as Water Temp, Spin Speed,
Soil Level, and Rinse. Not all modifiers are available with all
cycles and options. See “Modifiers.”
7. If desir
ed, select the CYCLE SIGNAL. The signal is helpful
when you are washing items that should be removed from the
washer as soon as it stops. Select Loud, Soft, or Off.
desired, select the BUTTON SOUND. This feature makes a
8. If
sound each time a button is pressed. Select Loud, Soft, or Off.
9. Select an
■ If you do not select START within 5 minutes of choosing a
d hold START for approximately 1 second.
cycle, the washer automatically shuts off.
■ When the wash cycle is complete, the DONE status light
glows, the door unlocks, and the wash load can be
removed from the washer. The washer powers down
automatically 60 minutes after the cycle is complete and
he DONE light goes off. To power down the washer
t
manually after the wash cycle is complete, select PAUSE/
CANCEL once.
10. T
o use the same cycle again, press POWER first, then select
START.
11. To beg
in the wash cycle later
Select DELAY WASH until the desir
ed delay time (in hours)
shows in the Estimated Time Remaining display. Select
START. The countdown to the wash cycle will show in the
display window.
IMPORTANT: When
delaying a cycle, use only powdered
detergents in the main wash compartment since liquid
detergents may seep out of the compartment during Delay
Wash, before the wash cycle begins.
Using the Dispenser
Your new washer has a dispenser drawer with three separate
compartments for your laundry products—one is for detergent,
one is for liquid chlorine bleach, and one is for liquid fabric
softener. Laundry products are diluted and dispensed
automatically at the proper time during the wash cycle, making it
unnecessary for you to return to the washer during the cycle to
add them.
It is normal for small amounts of water to r
when the wash cycle is complete.
Do not put laundry products direc
tly into the wash tub. Always
use the proper dispensers when adding laundry products.
Choosing the Right Detergent
Use only High Efficiency detergents. The package for this type of
detergent will be marked “HE” or “High Efficiency.” This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result
in washer errors, longer cycle times, and reduced rinsing
performance. It may also result in component failures and
noticeable mold or mildew. HE detergents are made to produce
the right amount of suds for the best performance. Follow the
manufacturer's instructions to determine the amount of detergent
to use. Remember, concentrated detergents such as 2x or higher
will use less detergent based on load size.
Use only HE High Efficiency detergent.
To fill dispenser compartments
1. Pull out the dispenser drawer.
2. Add the desired laundry product to the proper compartment.
3. Push in the dispenser drawer slowly and completely (to avoid
a spill).
A
B
Dispenser
A. Detergent type selector
B. Main Wash detergent compartment
C. Dispenser release lever
D. Chlorine bleach compartment
E. Fabric softener compartment
emain in the dispensers
C
D
E
11
Main Wash de
tergent compartment
(Letter B in Dispenser Illustration)
Add liquid or powdered HE detergent to this compartment for
your main wash cycle. The detergent type selector (A) must
always be in the correct position for the detergent type used. Slide
the detergent type selector to the correct position.
IMPORTANT: If you a
re using the Delay Wash option, powdered
detergent must be used in the Main Wash compartment, since
liquid detergents may seep out of the Main Wash compartment
before the main wash begins.
■ Use the detergent manufacturer's recommended amount for
load size.
■ Liquid or powdered color-safe bleach may be added to the
Main Wash compartment along with the same type of
detergent, liquid or powdered.
■ Liquid detergent:
A
Selector in position for liquid detergent
A. Detergent type selector
■ Powdered detergent:
A
Fabric softener compartment
(Letter E in Dispenser Illustration)
Pour measured liquid fabric softener into the fabric softener
dispenser, if desired.
IMPORTANT: D
1
/4 cup (60 mL).
■ Do not overfill. The dispenser holds
■ Do not spill or drip any fabric softener onto the clothes.
ilute all fabric softener with water for a total of
1
/4 cup (60 mL).
NOTES:
■
Use only liquid fabric softener in this dispenser.
■ Do not use fabric softener dispensing balls in this washer.
Dispensing balls will not operate correctly with this washer.
Pausing or Restarting
1. To pause the washer at any time, press PAUSE/CANCEL.
2. T
o continue the cycle, press START (for approximately
1 second).
Changing Cycles, Options, and Modifiers
Not all Options and Modifiers are available with all cycles.
Available modifiers will glow amber. If an Option or Modifier is
unavailable with a selected cycle, the light will not illuminate.
Cycles, Options, and Modifiers can be changed anytime before
START is selected.
Options and Modifiers can be changed anytime after START is
lected and before the start of the selected Option or Modifier.
se
To cancel a cycle and select a new cycle
1. Press PAUSE/CANCEL twice.
2. Press POWER.
lect desired cycle.
3. Se
4. Select the desired Options or Modifiers such as Water Temp,
Spin Speed, and Soil Level.
ess START (for approximately 1 second) to restart the
5. Pr
washer at the beginning of the new cycle.
Selector in position for powdered detergent
A. Detergent type selector
Chlorine bleach compartment
(Letter D in Dispenser Illustration)
Add no more than 2/3 cup (160 mL) liquid chlorine bleach to this
compartment. The bleach will be automatically diluted and
dispensed at the optimum time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.
■ Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess.
■ Do not fill beyond the “MAX” level.
NOTE: Overf
■ At the end of the cycle, a small amount of water may be left in
the dispenser. This is normal.
illing could cause garment damage.
To cancel a cycle
1. Press PAUSE/CANCEL twice.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: If
the water level or the temperature is too high, the washer
will drain automatically before the door unlocks.
To change Options or Modifiers after the cycle has started
1. Press PAUSE/CANCEL once.
2. Select the desired Options or Modifiers such as Water Temp,
Spin Speed, and Soil Level. Available selections will glow
amber.
ess START (for approximately 1 second) to continue the
3. Pr
cycle.
To drain the washer manually
1. Press PAUSE/CANCEL twice.
2. Pr
ess POWER.
3. Select DRAIN/SPIN.
ess START (for approximately 1 second) to begin the drain.
4. Pr
5. Wh
en the spin is complete, the door unlocks. Items can be
removed from the washer.
12
Status Lights
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional item
to the wash cycle and when the controls are locked.
Add A Garment
This washer allows an 8-minute period in which other garments
may be added to the load. You can add items to the washer if the
Add A Garment status light is glowing.
To a dd items when
1. Select P
items can be added.
2. T
START (for approximately 1 second).
To a dd items when
1. Select PAUSE/CANCEL twice. This will cancel the wash cycle
and options. The washer door unlocks, and items can be
added.
2. Close the door, press POWER and select the new cycle and
options. Select and hold START (for approximately 1 second).
AUSE/CANCEL once. The washer door unlocks, and
o continue the cycle, close the door and select and hold
Add A Garment light is glowing
the Add A Garment light is not glowing
Sensing/Revising Estimated Time
The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load.
The washer will automatically sense the progress in the cycle and
adjust the Estimated Time Remaining display. While the washer is
sensing, the estimated time will flash and the Sensing Status Light
will glow. When the sensing is complete, the flashing stops, the
status light goes off and the Estimated Time Remaining display is
updated.
The cycle time will be extended if oversudsing occurs or the load
unbalanced. The SUD routine removes extra suds and assures
is
proper rinsing of your garments. See “Troubleshooting.” During
the unbalance routine the time displayed may pause until this
activity is complete, then resume with the remainder of the cycle.
Cycles
Cycles can be selected by turning the Cycle Control knob to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels. The Modifier Indicator Lights, on the right-hand
side of the panel, will change as cycles are selected.
Done
The Done status light stays on for 60 minutes after the cycle is
complete, and then the washer shuts off.
Controls Lock/Unlock
The Controls Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or
option changes during a cycle. When Controls Lock is lit, all
buttons are disabled except for Pause/Cancel and Start. You can
lock the controls while the washer is operating.
To lock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds.
The status light next to the CONTROLS LOCK/UNLOCK button
will glow.
To unlock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until
the status light turns off.
NOTE: T
press and hold CONTROLS LOCK/UNLOCK for 3 seconds.
When the status light glows, the door is locked.
o lock or unlock the controls when the washer is off,
Door Locked
■ Each cycle has a preset Soil Level (estimated cycle time),
Water Temperature, and Spin Speed, and may have preset
options. The preset settings provide the recommended fabric
care for the selected cycle.
■ The preset settings will glow green to show the preselected
Options and Modifiers, and be changed anytime before
START is pressed. Not all Options and Modifiers are available
with all cycles. Available selections glow amber. (To change
settings after the cycle has started, press PAUSE/CANCEL
once, then select the desired settings. Press START to
continue the cycle.)
■ Powdered detergents may not dissolve well in a slow-speed
cycle. For best results, use liquid detergent in slow-speed
cycles.
Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water
Temperature, and Spin Speed. The preset settings provide the
recommended fabric care for the selected cycle. See chart.
Cycle Soil Level
(cycle time)
Sanitary Normal
Whitest
Whites
(2:35)
Normal
(1:30)
Water Temp Spin
Speed
Super Hot/Cold High
Hot/Cold High
Heavy Duty Normal
(1:10)
Bulky Items Normal
(0:55)
Hot/Cold High
Warm/Cold Low
13
Cycle Soil Level
(cycle time)
Normal/ Casual
Delicate Normal
Hand
Wa
shables
Quick Wash Light
Normal
(0:50)
(0:40)
Normal
(0:30)
(0:18)
Water Temp Spin
Speed
Warm/Cold High
Warm/Cold Medium
Cold/Cold Low
Warm/Cold High
Heavy Duty
Use this cycle to wash loads of sturdy, colorfast fabrics, and
heavily soiled garments. This cycle combines fast-speed
tumbling, longer wash time, and high speed spin to shorten drying
times. If the water temperature is lower than needed for this cycle,
the heater will warm the water to the optimum temperature.
Bulky Items
Use this cycle to wash large items such as blankets and
comforters. This cycle starts with a soak to thoroughly saturate
your large load. This is followed by medium wash action and lowspin speeds to maintain load balance.
Clean
Wa
sher
N/A
(1:05)
N/A High
With
AFFRESH™
Soak Normal
Warm/Cold No Spin
(0:32)
Rinse/Spin N/A
Warm/Cold High
(0:22)
Drain/Spin N/A
N/A High
(0:13)
To change the preset cycle settings
Press the selector of each available setting until the desired
setting glows green.
Sanitary
Cycles certified by NSF International, an independent, third party
testing and certification organization are those with the sanitize
temperature selection available. The certification verified that
these cycles reduce 99.9% of bacteria typically found on clothing,
bedding, and towels. There is no carryover of bacteria between
loads after the cycle is complete.
Normal/Casual
Use this cycle to wash loads of no-iron fabrics, such as sport
shirts, blouses, casual business clothes, permanent press blends,
cottons and linens, and synthetic fabrics. This cycle combines
medium-speed tumbling, high-speed spin, and a load cooling
process to reduce wrinkling.
NOTE: For th
e best energy performance, use the Normal/Casual
Cycle.
Delicate
Use this cycle to clean hand washable and special-care garments.
Similar to the way garments are hand washed in a sink, the wash
action of this cycle combines periods of low speed tumbling and
soaking. CRADLE CLEAN™ motion offers gentle fabric care for
effective cleaning of delicate and hand washable garments.
Medium speed spin helps reduce wrinkling.
■ Use mesh garment bags to wash undergarments such as
underwire bras, items with strings, and small items such as
infant socks.
Hand Washables
Use this cycle to clean hand washable and special-care garments.
Similar to the way garments are hand washed in a sink, the wash
action of this cycle combines periods of low speed tumbling and
soaking. CRADLE CLEAN™ motion offers gentle fabric care for
effective cleaning of delicate and hand washable garments. Low
speed spin helps reduce wrinkling.
Certified to Sanitize
Use this cycle to clean heavily soiled, c
olorfast fabrics. This cycle
combines a super hot water temperature and fast-speed tumbling
to help ensure the removal of heavy soils and stains. It is
recommended that you set your hot water heater to 120°F (49°C)
to ensure proper performance during this cycle. Extra high speed
spin helps shorten drying time. Only Sanitary cycle has been
designed to meet the requirements of NSF Protocol P172 for
Sanitizing Efficacy.
Whitest Whites
This cycle is especially designed for cleaning loads of soiled white
fabrics with the addition of bleach. Hot washing temperatures
assure optimal bleach activity. An additional rinse provides
optimal rinse performance to avoid chlorine residues on your
laundry. This cycle combines fast-speed tumbling, longer wash
time, and high speed spin to shorten drying time.
14
Quick Wash
Use this cycle to wash small loads of 2-3 lightly soiled garments
that are needed in a hurry. This cycle combines fast-speed
tumbling, a shortened wash time, and high speed spin to shorten
drying time.
Clean Washer With AFFRESH™ cycle
Use the Clean Washer With AFFRESH™ cycle once a month to
keep the inside of your washer fresh and clean. This cycle uses a
higher water level. Use with AFFRESH
®
washer cleaner tablet or
liquid chlorine bleach to thoroughly clean the inside of your
washing machine. This cycle should not be interrupted. See
“Cleaning Your Washer” in the “Washer Care” section.
IMPORTANT:
Do not place garments or other items in the washer
during the Clean Washer cycle. Use this cycle with an empty wash
drum.
Soak
Use the Soak cycle to help remove small spots of set-in stains on
fabrics. This cycle provides a soak time with warm or cold water
followed by drain. Extra water, a short tumbling phase for equal
distribution of the laundry, and a soaking time without drum
movement improve the removal of set-in stains. Drain without spin
assures gentle treatment, even for delicate articles.
Rinse/Spin
Delay Wash
Use this cycle to get a rinse and spin only. This cycle combines
fast-speed tumbling and High speed spin. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.
A Rinse/Spin cycle is useful for
■ Loads that need rinsing only, like swimsuits.
NOTE: For mor
cycle to rinse swimwear, change the Speed Spin Modifier
setting to Medium or Low to avoid fabric stress.
■ Adding fabric softener to a load.
Drain/Spin
Use this cycle to drain your washer or to drain and spin your wash
load. The spin speed is preset to High. If desired, you can reduce
the spin speed by selecting the speed you want from the SPIN
SPEED modifier.
Loads of synthetics, delicate fabrics, hand washables, and
NOTE:
woolens should be drained with no spin or low spin speed to
avoid fabric stress.
e delicate loads, when using a Rinse & Spin
Normal Washer Sounds
As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation.
Options
You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles. Available options will glow amber. Current
selections will glow green. If an option is unavailable with a
selected cycle, the light will not illuminate.
To begin the wash cycle later, select DELAY WASH until the
desired delay time (in hours) shows in the Estimated Time
Remaining display, and then select START. The countdown to the
wash cycle will show in the display window, and the button
indicator will blink until the cycle begins.
IMPORTANT: W
detergents in the main wash compartment since liquid detergents
may seep out of the compartment during Delay Wash, before the
wash cycle begins.
Tu mbleFresh™ option
Use this option when you are not able to unload your clothes,
soon after the wash cycle ends. This option provides periodic
tumbling for up to 6 hours to help freshen your clothes. During
this time, the “Done” indicator
remains locked, and the TumbleFresh™ indicator light will flash.
The TumbleFresh™ option will automatically stop and the door
lock will be released after this time expires, or if you press cancel
at anytime to unload your laundry.
Deep Clean
Use this option for heavily soiled loads that need improved stain
treatment, loads with multiple types of stains, or loads you
suspect as having stains, but are afraid may
(no sorting or searching for stains). When Deep Clean is selected,
water temperature of the selected wash cycle is automatically
the
set to warm. The water will then be slowly heated to the temperature
selected, to aid in stain removal. This option will provide optimal
removal of organic stains such as blood and grass.
Pre Soak
Use this option for loads of heavily soiled items that need
pretreatment.
■ Add detergent to Main Wash compartment of the dispenser
drawer.
This option adds tumbling time
The washer continues automatically from prewash into the main
wash cycle.
hen delaying a cycle, use only powdered
remains activated, the door
have been missed
prior to the selected main cycle.
■ See the “Laundry Guide” for an overview of possible options
for each Wash Cycle selection.
■ You can select more than one option for a cycle. Some
options cannot be added to some cycles. If an option is
unavailable with a selected cycle, there will be 3 short tones,
d the light for that option will not glow when selected.
an
Cycle Signal
This signal is helpful when you are removing items from the
washer as soon as it stops. Press CYCLE SIGNAL to select Loud,
Soft, or Off. To activate/deactivate button sound hold cycle signal
button for 3 seconds.
15
Loading...