Whirlpool TK PURE XXL 8B BK INSTRUCTION FOR USE

Machine operation

Additional information (including troubleshooting and service) can be found in the individual chapters of the instructions for use.

Sort laundry according to

care symbols:

Do not tumble dry Suitable for tumble drying -

at low drying temperature

Suitable for tumble drying

Sort by:

Material thickness:

separate laundry according to weight (e.g. dry towels and thin underwear separately).

Type of material: Degree of drying: Do not tumble dry:

with metallic decorations, bulky items such as sleeping bags, etc.

Whenever there is greater load than the dryer can handle,

Cotton (linen); synthetic textiles (easy care).

Cupboard dry, iron dry etc.

Woollens, silk, nylon stockings, delicate embroidery, fabrics

Preparing laundry

Opening door

Loading dryer

Selecting programme

Selecting options

(if available)

Starting dryer

Programme end -

unloading dryer

Switching dryer off

Please note:

thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.

Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover

Check that all fastenings are closed and that pockets are empty. Please ensure that there are no cigarette lighters in the wash. Turn laundry inside out.

Pull the door handle. If the child safety lock is activated, please deactivate it (additional information can be found in the “Door Reversibility/Child Safety Lock” chapter of the instructions for use).

Place laundry loosely in the drum to achieve equal drying throughout. Then close the door.

Select the drying programme required by turning the programme selector knob (for information, refer to programme table).

Select the option required by pressing the corresponding button. The indicator lamp above the relevant button lights up to confirm your selection. A fast blinking led indicates a wrong selection is made (incompatible options). Press the button again to cancel the option.

The drying programme is started by pressing the The relevant indicator lamp lights up.

Changing programme selection:

drying, the dryer stops. The To operate the new programme, again press the

Interrupting programme:

button and open the door. Wait at least 5 minutes, to allow the laundry to cool down, before you unload the dryer. For your safety the drying cycle stops automatically if you open the door. To restart, after door opening, close the door and press the

Warning:

items are quickly removed and spread out so that the heat is dissipated. The final part of a tumble dryer cycle occurs without heat (cool down cycle) to

ensure that the items are left at a temperature that ensures that the items will not be damaged.

Set the programme selector knob to “Off” “ ”.

Cleaning the lint filter:

it. Brush lint using a soft brush or your fingertips. Close lint filter and push firmly back into place.

Emptying water container:

the container when empty by pushing it completely back into place. If required, activate child safety lock (additional information can be found in the “Door

Reversibility/Child Safety Lock” chapter of the instructions for use).

“Start (Pause)”

Never stop a tumble dryer before the end of the drying cycle, unless all

T ake the laundry out of the dryer. The drying process is complete

End:

and the anti-crease phase has been reached (active).

Anti-Crease:

an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals to prevent the laundry from creasing.

Open door, pull lint filter up and out of machine and open

If the programme selected is changed during

“Start (Pause)”

To interrupt a drying c ycle, press the

button again.

If the laundry is not removed at the end of the drying cycle,

Pull container out by the handle and empty. Replace

“Start (Pause)”

indicator lamp flashes.

“Start (Pause)”

button.

“Start (Pause)”

5019 407 01067

(Subject to technical modifications)

Before using the machine, please also read the instructions for use carefully!

TK Pure XXL 8B FLD

Quick Reference Guide

Filter

The indicator lamp lights up when the filter and/or heat exchanger need cleaning.

Clean the filter at the end of every cycle.

Water container

The indicator lamp lights up when the water container needs to be emptied. The drying cycle is automatically interrupted. Empty the container and restart the drying programme.

Empty the water container after every drying cycle

Clean heat exchanger

The Led lights up after 30 cycles when the heat exchanger needs to be cleaned. Clean the heat exchanger. Then for reset the led indication, turn the programme selector knob to the vertical position indicated by the symbol “ ” and press the button during 3 seconds until led switches off.

“Start (Pause)”

Service

If this red icon is on, your dryer needs to be checked by the Bauknecht Service.

Time remaining display

Depending on the programme selected, once the drying cycle has been started, a default drying time is displayed. The time displayed is corrected by a few minutes depending on the volume, type and dampness of the laundry.

The drying time specified is a calculated value which will be updated during the drying programme.

The flashing lines indicate that the calculation is running. The remaining time will be updated.

Indicator lamps

End

The drying programme is finished. Please unload the dryer.

Overdry protection

The indicator lights up when a humidity controlled programme is selected, to indicate the working protection function. The flashing symbol indicates the update of the remaining time indication.

Dryness level

This is an option to adjust the dryness of the laundry according to your wishes. Select the desired programme and the option dryness level adjustment by pressing the button. Pressing 1 time the button, you select more dry level

Pressing 2 times the button, you select less dry level

Pressing 3 times the button, you select again normal dry level.

+ 4 hidden pages