Whirlpool TGZ 3570 IN INSTRUCTION FOR USE

4gb66011b.fm Page 1 Monday, July 14, 2003 4:04 PM

TGZ 3570 PRODUCT DESCRIPTION SHEET

NL

1. Removable panstand grids
2-5. Medium burners
3-6. Large burners

4. Small burner

7. Control knob for front

left burner

8. Control knob for rear,
left burner

9. Control knob for
central burner

10. Control knob for rear,
right burner

11. Control knob for front
right burner

Symbols

Operation of burners with
safety device and electric
ignition

To light one of the burners:

• Press the relative knob and turn it
anti-clockwise to the large flame and star

setting.

• At the same time, hold the knob down
until the burner ignites.

• After the burner has ignited, keep the knob
pressed down for about 10 seconds.

• Release the knob.

If the burner does not ignite, repeat the
operations described above.

Shaded
circle
Large
flame and
star
Small
flame

Tap closed
Maximum opening/

delivery and electric
ignition
Minimum opening or
reduced delivery

Note:

— Should particular local conditions of the

delivered gas make ignition of the burner
difficult, it is advisable to repeat the
operation with the knob turned to the
small flame setting.

— The burner safety device shuts off the gas

supply to the burner if the flame goes out
accidentally (because of a sudden
draught, an interruption in the gas
delivery, boiling over of liquids, etc.).

— The separator panel, positioned beneath

the cooktop at a minimum distance of
20 mm, must be sealed.

5019 419 66011/B



4gb66011b.fm Page 2 Monday, July 14, 2003 4:04 PM

DIMENSIONS OF COOKING HOB AND WORKTOP (mm)

NOTE: If the distance “A” between the wall cabinets is between 600 mm and

680 mm, the height “B” must be a minimum of 520 mm.
If the distance “A” between the wall cabinets is greater than the width
of the cooktop, the height “B” must be a minimum of 400 mm.
Before installing a hood above the cooktop please refer to the hood
instructions, which specify the correct distance.

INJECTORS TABLE CATEGORY II2L3B/P

Type of gas used Type of

NATURAL GAS
(Methane) G25

LIQUID
PETROLEUM GAS

(Cylinder) G30
LIQUID

PETROLEUM GAS
(Cylinder) G31

Type of gas
used

G25 25 mbar 5 gas 10.5 1163 l/h 21
G30 30 mbar 5 gas 10.5 763 g/h 21
G31 30 mbar 5 gas 9.45 674 g/h 18.9

burner

large
medium
small

large
medium
small

large
medium
small

Appliance model Total rated heat

Injector
marking

132
102

80
87

66
50

87
66
50

Rated
heat
capacity
Pcs-kW

3.00

1.75

1.00

3.00

1.75

1.00

2.7

1.575

0.9

capacity
Pcs-kW

Rated
consumption

332 l/h
194 l/h
111 l/h

218 g/h
127 g/h

73 g/h

193 g/h
112 g/h

64 g/h

Total rated
consumption

Reduced
heat
capacity
Pcs-kW

0.80

0.50

0.50

0.80

0.50

0.50

0.80

0.50

0.50

Gas pressure mbar

min. rat. max.

20 25 30

25 30 35

25 30 35

Air required for
burning m

3

/h