40105512GB.fm Page 1 Wednesday, October 21, 2009 12:19 PM
GB SUPER ECO 6410 PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
White Cotton
Coloured Cotton
60 - 95 °C
Coloured Cotton
40 °C
SuperEco
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Koch-/
Buntwäsche
60 - 95 °C
Buntwäsche
40 °C
SuperEco
60 °C
Pflegeleicht
30 - 40 - 60 °C
Feinwäsche
30 - 40 °C
Care
Labels
Max
Load
- Respect the manufacturer’s recommendations on the care label
kg
6.0
Normally to heavily soiled bed linen, table linen and underwear, towels,
shirts etc. made of cotton and linen.
5.0
Normally to heavily soiled and robust bed linen, table linen and underwear,
towels, shirts etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal
6.0
to be run overnight to additionally profit from the more favourable energy rates. To
avoid noise of spinning at night, set spin speed to “0” and start spin programme in
the morning, or define programme start with “Start Delay” accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
2.5
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Type of wash/Notes
C
D
E. Programme selector
H
A
}
F. “Start” button
G. Spin speed selector
B
H. Programme sequence indicator
I
and start delay indicators
FGE
Detergents and additives Special options
Pre-
Main
Wash
Yes
Yes
Yes
Yes
Softener Start
❉❉❉❉❉❉❉
❉❉
❉❉❉❉❉❉❉
❉❉
wash
❉
—
❉
❉
I. “Reset” button
Clean +
delay
Start-
Clean +
vorwahl
——
—
Pre-
wash
Vor-
wäsche
❉
Intensive
rinse
Intensiv
spülen
❉❉❉
—
Rinse
Variable
hold
spin
Spül-
Schleudern
stopp
❉❉
Max
Spin
Speed
rpm
max.
max.
1000
1000
1)
1)
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Eco Cotton
60 °C
Rinse & Spin Spülen & Schleudern
Spin Schleudern
Drain Abpumpen
= optional / Y es = dosing required.
❉
:
1)
For improved garment care, spin speed is restricted in these programmes.
Black process 45.0° 150.0 LPI
Mischwäsche
40 °C
Schnelle Wäsche 30min.
30 °C
Wolle
Kalt - 40 °C
Handwäsche
40 °C
Baumwolle Eco
60 °C
Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
Shortly worn outer clothing made of cotton, polyester, polyamide and
3.0
blends with cotton.
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark
1.0
Company for machine washable wool.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
A very gentle spin is used in this programme.
1.0
This programme (40°C) is tested and approved by The Woolmark
Company for handwashable wool.
Heavily soiled and robust laundry washable at 60°C such as bed linen, table
linen, towels etc.
6.0
The extended programme duration enables economic energy and water
consumption while maintaining good washing results.
Same as the last rinse and the final spin in the “Coloured Cotton” programme.
—
—
——
6.0
Intensive spin. Same as spin cycle in the “Coloured Cotton” programme.
6.0
Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0619
Yes
—
Yes
—
Yes
—
Yes
—
Yes
—
——
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
———
———
——
———
———
———
——
——
————
❉
————— —
❉
❉❉❉
❉❉
❉❉
❉❉
❉❉❉
❉❉❉
5019 401 05512
max.
max.
1)
1000
1)
400
max.
max.
max.
❉
40105512GB.fm Page 2 Wednesday, October 21, 2009 12:19 PM
CONSUMPTION DATA
Programme
White Cotton 95 6.0 59
Coloured Cotton 60 6.0 49 1.02 2:20
Coloured Cotton 40 5.0 56 0.70 2:00
SuperEco 60 6.0 51 0.72 4:00
Synthetics 60 2.5 50
Synthetics 40 2.5 46 0.50 1:20
Delicates 30 1.5 60 0.50 0:45
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
**
Eco Cotton
To reduce the water temperature, some cold water is added at the end of th e main wash cycle, before the pump drains the water out.
Reference Programme for Energy Label.
**
Temperat ur e
(°C)
60 6.0 49 0.78 4:00
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
• Turn the
• The indication lamp next to the
•The
programme selector
programme and temperature.
indication lamp
lights up.
of the predefined spin speed
to the desired
button blinks
“Start”
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective
indication lights up.
If the combination of programme and additional option(s)
is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Clean +” button
• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will
optimize the additive’s efficiency to get better wash
performance and stain removal.
• Choose temperature of 30 or 40°C and use with
maximum load.
• Add an appropriate amount of in-wash additive for
stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option). Respect the
manufacturer’s dosing instructions.
Load
Water
(kg)
• Prolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain remove rs and bleaches on
oxygen basis.
not be used!
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
selecting “Prewash”.
“Intensive rinse” button
• More water is added and rins e cycle is prolonged.
• This option is particularly suitable for areas with very soft
water , washing baby linen and helping people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning
to a later time, or if you want to drain only.
Note:
time the “Rinse hold” light in the programme sequence
indication is on. The indication lamp next to the
“Start”
Terminate the “Rinse hold” option:
• Press the
terminate automatically with the final spin cycle for the
present wash programme.
Energy
(l)
(kWh)
1.90 2:00
*
0.80 1:35
*
The programme stops to “Rinse hold” at the
button blinks.
“Start”
Approx. Programme Duration
(hours : minutes)
Chlorine or perborate bleaches must
button; the programme will
• If you do not wish to spin the clothes, turn the
programme selector to the “Drain” programme and
press the
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
“Start”
button.
START DELAY
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper.
Do not use liquid detergent when activating “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay time
by 1, 3, 6, 9 or 12 hours;
• Press the
The indication light of the “Start delay” button blinks
and the countdown of the delay time begins.
• The tim e d e lay indication disappears when the
programme starts and it is replaced by the programme
sequence indication.
• Once having pressed the
time can be reduced by pressing again the “Start
delay” button.
To cancel the “Start delay”
...before you press the “Start” button:
• Turn the programme selector to another position or
press the
...after having pressed the “Start” button:
• Press the
start delay indicator goes off, and the default
programme setting appears again.
button.
“Start”
“Start”
button.
“Reset”
button for at least 3 seconds - the
“Reset”
button, the delay
PROGR AMME START
Open the tap and press the
lamp next to the
sequence indicator shows the current programme phase,
running from left to right through Wash, Rinse, Drain/Spin.
button lights up. The programme
“Start”
button. The indication
“Start”
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
The light blinks.
2. Select the new programme and, if you want, another
spin speed and any options.
3. Press the
continues at the same position where the previous
programme was interrupted. Do not add detergent
for this programme.
button to pause the programme.
“Start”
button again. The new programme
“Start”
CANCEL A RUNNING PROGRAMME
BEFORE THE END
The
• Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds. Any
“Reset”
existing water is drained out before the door can be
opened.
5019 401 05512
Black process 45.0° 150.0 LPI