Whirlpool SUPER ECO 1300 INSTRUCTION FOR USE

40105384GB.fm Page 1 Thursday, April 19, 2007 3:22 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Max

Programme

Cotton /

Hygienic +

95 °C

Cotton

60 °C

Cotton

40 °C

SuperEco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin Spoelen & Centrif.

Spin Centrifugeren

Short Spin Kort centrifugeren

Drain Afpompen

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted to 1000 rpm in this programme.

For improved garment care, spin speed is restricted to 400 rpm in this programme.

Kookwas

95 °C

Bonte was

60 °C

Bonte was

40 °C

SuperEco

60 °C

Synthetisch

30 - 40 - 60 °C

Fijne was

30 - 40 °C

Gemengde was

40 °C

Snelwas

30 °C

Wol

Koud - 40 °C

Handwas

40 °C

Lingerie

30 °C

Care

Labels

— —

— ——

Load

- For temperature selection, respect the manufacturer’s recommendations

on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels,

6.0

shirts etc. made of cotton and linen. Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been

6.0

tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

5.0

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy

6.0

rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

2.5

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

Slightly to normally soiled textiles made of cotton and/or synthetics.

3.0

Shortly worn outer clothing made of cotton, polyester, polyamide and

3.0

blends with cotton. Only woollens, labelled with the Woolmark and identified as machine

1.0

washable. Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

This programme is particularly suitable to treat delicate lingerie (use of a

1.0

laundry net strongly recommended).

Same as the last rinse and the final spin in the “Cotton” programme.

6.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

6.0

programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool”

1.0

programme. Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

Type of wash/Notes

C D

E. Programme selector

F. “Start” button G. Spin speed selector

A B

H. Programme sequence indicator

I. “Reset” button J. “Start delay” button

Detergents and additives Special options

Pre-

Main

wash

❉

—

❉

—

— —

—— ———

———

Softener Start

wash

Ye s

delay

Start

selectie

❉❉❉❉ ❉ ❉❉❉

❉❉

❉❉❉❉ ❉ ❉❉❉

❉❉—❉

❉❉

❉❉ ❉❉

❉

K. Time display

Eco

Pre-

wash

Eco

Voor-

was

—— —

—

——

—— — —

—— — — —— — —

—— —

—

Easy

ironing

Gemakkelijk

strijken

Intensive

Intensief

Spoelen

rinse

Rinse

hold

Spoel-

stop

❉❉❉

——

❉❉

❉❉❉❉

❉

—

❉❉

❉❉❉

—— — — — —— — — —

Variable

spin

Centrif.

❉

——— ——— — ——— —

5019 401 05384

Max Spin

Speed

rpm

max.

1000

max.

1000

400

max. max.

1000

Black process 45.0° 100.0 LPI

40105384GB.fm Page 2 Thursday, April 19, 2007 3:22 PM

CONSUMPTION DATA

Programme

Te m p e r a t u r e

(°C)

Cotton / Hygienic + 95 6.0 59

Load

(kg)

Wat er

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

1.90 2:00

Cotton 60 6.0 49 1.14 2:10

Cotton with “Eco”

***

60 6.0 49 1.02 2:20

Cotton 40 5.0 56 0.70 2:00 SuperEco 60 6.0 49 0.72 4:00 Synthetics 60 2.5 50

0.80 1:35

Synthetics 40 2.5 46 0.50 1:20

Delicates 30 1.5 60 0.50 0:45

Daily load 40 3.0 41 0.50 1:00

Quick wash 30 3.0 41 0.40 0:30

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Lingerie 30 1.0 45 0.40 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions

applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

programme selector

to the desired

programme and temperature.

2. The

time display

shows the duration of the chosen programme (in hours and minutes), and the

3. The indication lamp of the predefined

speed

indication lamp is flashing.

“Start”

lights up.

spin

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold” do not leave the laundry items to soak for too long.

The programme stops to “Rinse hold” at

Note:

the time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the

“Start”

button flashes.

Terminate the “Rinse hold” option:

•Press the

“Start”

button; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the

“Start”

button.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1 to 23 hours;

•Press the

“Start”

button. The indication light next to the “Start Delay” button flashes and the countdown of the delay time begins.

•The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the

“Start”

button, the number of hours preselected can be reduced by pressing again the “Start Delay” button.

To cancel the “Start Delay” ..before you press the “Start” button:

• Turn the programme selector to another position or press the

“Reset”

button.

..after having pressed the “Start” button:

• Press the

“Reset”

button for at least 3 seconds - the

start delay time disappears from the time display.

PROGRAMME START

Open the tap and press the indication lamp next to the

“Start”

button. The

button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp li ghts to s how that the d oor can be ope ned. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

“Start”

button to pause the

programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the

“Start”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

“Reset”

button cancels a programme before

the end.

•Press the

“Reset”

button for at least 3 seconds. Any existing water is drained out before the door can be opened.

5019 401 05384

Black process 45.0° 100.0 LPI