Whirlpool STEAM 1400/P, STEAM 1200 INSTRUCTION FOR USE

30106092GB.fm Page 1 Thursday, September 13, 2007 6:15 PM
GB PROGRAMME CHART
A. “On/Off” button B. Programme selection buttons C. Option buttons D. “Temperature” button E. “Start delay” button F. “Variable spin” button G. “Start/Pause” button H. “Drain/Reset” button I. Display
Tempe-
Programme
Cotton /
Antibacterial
Synthetic
Bawełniane
Antybakteria
Syntetyczne
rature
20 - 95 °C
20 - 60 °C
Care
Labels
C
Max
Load
- For temperature selection, respect the manufacturer’s recommendations on the care
kg
label
Normally to heavily soiled bed linen, table linen and underwear , towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates
8.0
bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with
3.5
cotton.
Type of wash/Notes
G
B
A
Detergents and additives Special options
Pre-
wash
H
Main wash
Yes
Yes
J. Programme sequence indication
I
}
C
}
K. “Door open” indication L. “Child lock” indication
N
Your washing machine is equipped with
O
automatic safety functions which detect
J
K M
and diagnose faults at an early stage and react appropriately, e.g.:
L
D E F
M. “Water tap closed” indication N. “Clean pump” indication O. “Service” indication
Start
Softener Big
items
Duże
rzeczy
Steam
Wash
Boost
Parowe
usuwanie
plam
Sanitization
2)
Higieniczny
2)
Steam
2)
2)
Wstępne
Pre-
wash
Intensive
rinse
Intensywne
płukanie
Rinse
hold
Stop
płukanie
❉❉❉❉❉❉❉
delay
Opóźnienie
startu
Variable
spin
Prędkość
wirowania
❉❉❉ ❉ ❉ ❉ ❉ ❉
Spin
Max Spin
Speed
rpm
max.
1000
1)
Daily load
Quick wash
(30 min)
Delicates
Handwash
Wool
Codzienne
Program szybki
(30 min)
Delikatne
Wełniane
Pranie ręczne
SuperEco
Steam
Refresh
Spin
Rinse and Spin
Drain
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Only selectable within the temperature range of 40 to 60°C.
Wirowanie
Płukanie i wirowanie
Wypompowanie
20 - 60 °C
20 - 30 °C 20 - 40 °C
20 - 40 °C
20 - 60 °C
—— ——
———
Slightly to normally soiled textiles made of cotton and/or
6.0
synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide
6.0
and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
2.5
Textiles made of silk, linen, wool and viscose marked as “handwashable”, or woollens labelled with the Woolmark and identified as machine washable.
2.0
This programme (40°C) is tested and approved by The Woolmark Company for machine washable and handwashable wool.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the
8.0
more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.
Clean and dry laundry items made of cotton and/or synthetics which were already used.
Refreshes, reduces smells, moderates creasing and makes the items
1.0
ready to wear or use within 20 minutes. After programme end, immediately put the laundry on hangers for 10 minutes before using. During this programme “St” appears on the display.
In this programme spinning is intensive. Same as the spin cycle in the
8.0
“Cotton” programme. Same as the last rinse and the final spin in the “Cotton” programme.
8.0
Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. Press “Drain/Reset” and then “Start/ Pause” to start the “Drain” programme.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garme nts labelled as “machine wash” or “hand wash” pr ovided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.
Yes
Yes Yes
Yes
Yes
——
—— — —
——
—— — —
——
❉❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉❉ ❉
———— — — — —
———— — — — — ——
——
❉❉❉ ❉
❉❉
max.
max.
1)
1000
1)
400
max.
——
max. max.
———— — — — — — — —
Whirlpool is a registered trademark of Whirlpool USA
M0702
5019 301 06092
Black process 45.0° 100.0 LPI
30106092GB.fm Page 2 Thursday, September 13, 2007 6:15 PM
CONSUMPTION DATA
Programme
Cotton 95 8.0 82 Cotton
***
Cotton 40 8.0 77 0.85 2:05 Synthetics 60 3.5 48 Synthetics 40 3.5 44 0.55 1:20 Daily load 40 6.0 79 0.70 1:00
Quick wash 30 6.0 72 0.35 0:30
Delicates 30 2.5 60 0.45 0:50
Handwash / Wool 40 2.0 45 0.65 0:40
SuperEco 60 8.0 75 0.95 4:00
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* **
***
Steam Refresh 1.0 1.0 0.20 0:10
The time indicated on the display can deviate from the values in the table, because it takes into account the operating conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.
Tem p e rat u r e
(°C)
60 8.0 69 1.36 2:20
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.
1. Push the
2. Select the
3. The
“On/Off”
signals that the washer is switched on. corresponding programme button; it is marked by a
blue light.
temperature
display can be altered by pressing the “Temperature” button or the “Variable spin” button .
button . The blue light circle
desired programme
and
spin speed
by pushing the
indicated on the
SELECT ANY DESIRED OPTION
When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Big Items” button
• Select this option for washing big laundry items such as blankets made of synthetic fibres, bed covers filled with feathers or artificial fibres, sleeping bags , bathmats and similar.
“Steam Wash Boost” button
• Treats the laundry with hot steam during the wash cycle in order to help removing stains.
• Selectable for laundry made of cotton and/or synthetics within temperature range of 40 to 60°C.
“Steam Sanitization” button
• Eliminates bacteria and helps sanitizing the laundry.
• Appropriate for cotton and/or synthetic laundry items with care label within temperature range of 40 to 60°C.
• Prolongs the programme by approx. half an hour to an hour, depending on the load size.
“Prewash” button
Load
Water
(kg)
• Only for heavily soiled loads (for example sand,
• Do not use liquid detergent for the main wash when
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
“Rinse hold” button
• The laundry remains in the last rinse water without
• This option is particularly recommended for the
• It is particularly useful if you want to postpone spinning
• If you select “Rinse hold”, do not leave the laundry to
Terminate the “Rinse hold” option:
• Press the
• If you do not wish to spin the clothes, push the
Energy
(l)
(kWh)
2.40 2:10
**
0.95 1:35
**
granular dirt) sensible. Increases the cycle time by approximately 15 min.
activating the Prewash option.
soft water or for washing baby linen, and helps people with allergies.
progressing to the final spin cycle to avoid creasing and prevent colours from changing.
programmes “Synthetics”, “Daily load” and “Delicates”.
to a later time, or if you want to drain only.
soak for too long.
The programme stops to “Rinse hold” at the time
Note:
the “Rinse hold” symbol on the display lights up. The blue light under the
“Start/Pause”
terminate automatically with the final spin cycle for the present wash programme.
“Drain/Reset”
button to start the Drain programme.
Approx. Programme Duration
(hours : minutes)
“Start/Pause”
button and then the
button flashes.
button; the programme will
“Start/Pause”
*
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.
START DELAY
The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.
• Select programme, temperature, spin speed and options.
• Press the “Start delay” button to select the delay time up to 23 hours.
• Press the The countdown of the delay time begins; the clock symbol next to the delay time and the dot between hours and minutes flash.
• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.
• Once having pressed the number of hours preselected can be reduced by pressing and holding the “Start delay” button. From 1 hour on, the delay time can also be reduced by minutes.
To cancel the “Start delay” ..before you press the “Start/Pause” button:
• Select another programme or press the
Reset”
..after having pressed the “Start/Pause” button:
• Press the the start delay time disappears from the display.
“Start/Pause”
button.
“Drain/Reset”
button.
“Start/Pause”
button for at least 3 seconds -
button, the
“Drain/
PROGR AMME S TART
Open the tap and press the blue light under the programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.
“Start/Pause”
“Start/Pause”
button is on. The
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the symbol lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
button. The
CHILD LOCK
You can lock the buttons of the control panel against improper use (e.g. by children).
• Press the temperature and the spin speed button simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up.
• To unlock the buttons again: proceed in the same way.
RED INDICATIONS ON THE DISPLAY
“Water tap closed”
The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.
PROGRAMME END
• The symbols of the programme sequence indicator
are dark, and the “Door open” symbol lights up.
1. Switch the machine off by pushing
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
“On/Off”
.
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
1. Press the
programme. The light flashes.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the
programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
“Start/Pause”
“Start/Pause”
button to pause the
button again. The new
CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END
The
“Drain/Reset”
the end.
• Press the
seconds. Any existing water is drained out before the door can be opened. Caution! The washing might still be hot.
button cancels a programme before
“Drain/Reset”
Whirlpool is a registered trademark of Whirlpool USA
button for at least 3
5019 301 06092
Black process 45.0° 100.0 LPI
Loading...