40105401GB.fm Page 1 Friday, June 29, 2007 10:15 AM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
L
J
C
D
G
E. Programme selector
H
F. “Start/Pause” button
G. “Variable spin” button
H. Programme sequence indicator
A
B
I. “Reset” button
I
J. “Start delay” button
K. “Temperature” button
MF K
E
L. Display
M. “Favourite” button
Max
Programme
White Cotton /
Antibacterial
Cotton
SuperEco
Synthetics
Daily load
Quick wash
Delicates
Wool
Lingerie /
Handwash
Rinse & Spin
Spin
Gentle Spin
Drain
❉
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Do not use liquid detergent when activating the Start Delay .
3)
Do not use liquid detergent for the main wash when activating the Pre wash op tion.
Kookwas
Bonte was
SuperEco
Synthetisch
Gemengde
was
Snelwas
Fijne was
Wol
Handwas
Lingerie
Spoelen & Kort
centrifugeren
Centrifugeren
Kort
centrifugeren
Abpumpen
Tempe-
rature
70 - 95 °C
50 - 60 °C
20 - 40 °C
20 - 60 °C
20 - 60 °C
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 40 °C
20 - 40 °C
——
——
——
——
Care
Labels
Load
- For temperature selection, respect the
manufacturer’s recommendations on the care label
kg
Normally to heavily soiled bed linen, table linen and underwear,
6.0
towels, shirts etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates
6.0
bacteria, ensuring sanitization of your laundry. The bacteria
removal efficiency has been tested following a similar methodology
to the NF EN 13697 standard of Nov. 2001.
5.0
Slightly to normally soiled bed linen, table linen and underwear,
towels, shirts etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing
duration. Ideal to be run overnight to additionally profit from the more
6.0
favourable energy rates. To avoid noise of spinning at night, set spin
speed to “0” and start spin programme in the morning, or define
programme start with “Start delay” accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester
2.5
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Slightly to normally soiled textiles made of cotton and/or
3.0
synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide
3.0
and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Only woollens, labelled with the Woolmark and identified as
1.0
machine washable.
Textiles made of silk, linen, wool and viscose marked as
“handwashable”.
Up to a temperature of 30°C, this programme is particularly
1.0
suitable to treat delicate lingerie (use of a laundry net strongly
recommended).
Same as the last rinse and the final spin in the “Cotton” programme.
6.0
In this programme spinning is intensive. Same as the spin cycle in the
6.0
“Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the
1.0
“Wool” programme.
Drain only - no spinning. Alternative method of terminating
—
programme after “Rinse Hold”.
Type of wash/Notes
Detergents and additives Special options
Pre-
wash
Main
Softener Eco +
wash
Yes
Yes
Yes
Yes
3)
3)
3)
Yes
Yes
3)
Yes
Yes
❉
—
❉
—
—
❉
—
—
——
Pre-
Rinse
Eco
wash
Voor-
was
hold
Spoel-
stop
Intensive
rinse
Intensief
Spoelen
Easy
ironing
Gemakkelijk
strijken
❉❉❉❉❉ ❉
❉
——
❉❉
—
❉❉❉❉❉ ❉
❉
❉
❉
❉
❉
❉
——
——
—
❉❉
——
——
——
❉❉ ❉
❉
——
——
❉
❉
❉❉
——
——
—
——————— —
——————— —
Start
delay
Variable
spin
Start
Centrif.
selectie
2)
❉
❉
❉
❉
❉
❉
❉
❉
❉
2)
❉
2)
❉
2)
❉
2)
❉
2)
❉
2)
❉
2)
❉
❉❉
❉❉
❉❉
——————— — ——
5019 401 05401
Spin
Max
Spin
Speed
rpm
max.
max.
1000
max.
max.
1000
1000
400
max.
max.
1000
—
1)
1)
1)
1)
1)
40105401GB.fm Page 2 Friday, June 29, 2007 10:15 AM
CONSUMPTION DATA
Programme
Temperature
(°C)
White Cotton / Antibacterial 95 6.0 59
Load
(kg)
Water
(l)
**
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
1.90 2:00
*
Cotton 60 6.0 56 1.14 2:10
Cotton with “Eco”
***
60 6.0 49 1.02 2:20
Cotton 40 5.0 56 0.70 2:00
SuperEco 60 6.0 51 0.72 4:00
Synthetics 60 2.5 50
**
0.80 1:35
Synthetics 40 2.5 46 0.50 1:20
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Delicates 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Lingerie 30 1.0 45 0.40 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure an d temp eratu re, t he loa d a nd th e type of wash.
The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions
*
applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the
2. The
3. The indication lamp of the predefined
programme selector
programme. The display shows the programme
duration in hours and minutes as well as the predefined
temperature. The
temperature
“Temperature” button.
lights up; in case you want to set another spin speed,
press the “Variable spin” button.
“Start/Pause”
can be altered by pressing the
to the desired
button flashes.
spin speed
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the Prewash option.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
• This option is particular ly recomme nded for the
programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning
to a later time, or if you want to drain only.
• If you select “Rinse hold”, do not leave the laundry to
soak for too long.
Note:
The programme stops to “Rinse hold” at the
time the “Rinse hold” light in the programme sequence
indicator is on. The indication lamp next to the
Pause”
Terminate the “Rinse hold” option:
• Press the
• If you do not wish to spin the clothes, turn the
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and
• Increases the water quantity and the clothes are spun
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
button flashes.
terminate automatically with the final spin cycle for the
present wash programme.
programme selector to the “Drain” programme and
press the
soft water, washing baby linen and helps people with
allergies.
“Daily load” programmes to make ironing easier.
very gently.
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
“Start/Pause”
“Start/Pause”
button; the programme will
button.
“Start/
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
SAVE YOUR FA VOURITE PROGRAMMES
If there is a programme setting which you use frequently,
the appliance offers the possibility to save one setting for
each programme so that it can be used again by just
pushing one button.
• Select the desired programme , temperature, spin spe ed
and option(s), push and hold the
at least 3 seconds. The lamp next to
flashes and then lights up - the programme setting is saved.
Next time you want to use your individual programme
setting, select the programme, push the
button and start by pushing
If you want to replace the saved programme setting
by another one:
• Push the programme button, select temperature, spin
speed and options as desired and then press and hold the
“Favourites”
saved programme setting will be replaced by the new one.
button for at least 3 seconds. The previously
“Favourites”
“Favourites”
“Favourites”
“Start/Pause”
button for
shortly
.
START DELAY
The “Start Delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper.
Do not use liquid detergent when activating the “Start Delay”.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay time
by 1 to 23 hours;
• Press the
• The time delay in dication disappears when th e programme
• Once having pressed the
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another position or
..after having pressed the “Start/Pause” button:
• Press the
“Start/Pause”
The indication light next to the “Start Delay” button lights
up and the countdown of the delay time begins. During the
countdown, the light over the “Start Delay” button and the
dot between hours and minutes on the display flashes.
starts and it is replaced by the remaining programme time.
number of hours preselected can be reduced by pressing
and holding the “Start Delay” button. From 1 hour on,
the delay time can also be reduced in steps of 10 minutes.
press the
start delay time disappears from the display.
“Reset”
“Reset”
button.
“Start/Pause”
button.
button for at least 3 seconds - the
button, the
PROGRAMME STA RT
Open the tap and press the
indication lamp over the
The programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme ph ases. If this is
an animation appears on the displ ay
the case,
“Start/Pause”
“Start/Pause”
button. The
button lights up.
.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in your Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter
case refer to the Instructions for Use (“Removing the
Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPT IONS
AFTER PROGRAMME START
1. Press the
programme. The light flashes.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
“Start/Pause”
“Start/Pause”
button to pause the
button again. The new
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
“Reset”
The
• Press the
button cancels a programme before the end.
“Reset”
existing water is drained out before the door can be
opened.
button for at least 3 seconds. Any
5019 401 05401